Quisk version 4.2.40

CHANGELOG.txt

@@ -1,3 +1,18 @@
+Quisk Version 4.2.40  November 2024
+===================================
+Python 3.13 eliminated the telnetlib module, so I wrote a replacement. I fixed a bug in window sizing.
+If you use the Dx Cluster feature, please report any problems. Dx Cluster used to use the telnetlib module
+but is now new code.
+
+I updated the install to Python 3.13. Please report any problems with Python 3.13.
+
+Quisk Version 4.2.39  October 2024
+==================================
+I added an optional Hardware method PollGuiControl(self). If you define this in your Hardware file,
+the GUI thread will call it frequently. It can be used to set PTT from your hardware.
+
+I am trying to work around a wxPython quirk that causes mouse wheel tuning to fail. Please test.
+
 Quisk Version 4.2.38  September 2024
 ====================================
 This is a bugfix release. I fixed a bug in the Hamlib serial port when using a physical TTY instead

__init__.py

@@ -1,2 +1,2 @@
-#Quisk version 4.2.38
+#Quisk version 4.2.40
 from .quisk import main

dxcluster.py

@@ -1,9 +1,9 @@
-from __future__ import absolute_import
 # This code was contributed by Christof, DJ4CM.  Many Thanks!!
+# Modified November 2024 by N2ADR to remove deprecated telnetlib module.
 
 import threading
+import socket
 import time
-import telnetlib
 import quisk_conf_defaults as conf
 
 class DxEntry:
@@ -81,61 +81,109 @@ class DxEntry:
   
 class DxCluster(threading.Thread):
   def __init__(self):
-    self.do_init = 1
+    self.error = 'Starting'
+    self.dxSpots = []
     threading.Thread.__init__(self)
     self.doQuit = threading.Event()
-    self.dxSpots = []
     self.doQuit.clear()
+    self.dxLock = threading.Lock()
+    self.addr = conf.dxClHost + ':' + str(conf.dxClPort)
+    self.msg_no_spots = "No DX Cluster data from " + self.addr
+    self.msg_one_spot = '1 DX spot received from ' + self.addr
+    self.msg_spots =    ' DX spots received from ' + self.addr
     
   def run(self):
-    self.telnetInit()
     self.telnetConnect()
+    if self.error:
+      self.sock.close()
+      return
     while not self.doQuit.isSet():
       try:
-          self.telnetRead()
+        by = self.sock.recv(1024)
+      except TimeoutError:
+        continue
       except:
-        self.tn.close()
-        time.sleep(20)
+        by = b''
+      if by:
+        with self.dxLock:
+          self.bytes += by
+      else:
+        self.sock.close()
+        self.error = "Restarting " + self.addr
+        time.sleep(2)
         if not self.doQuit.isSet():
           self.telnetConnect()
-    self.tn.close()
-      
-  def setListener (self, listener):  
-    self.listener = listener
+          if self.error:
+            self.sock.close()
+            return
+    self.sock.close()
         
-  def telnetInit(self):
-    self.tn = telnetlib.Telnet()
-      
   def telnetConnect(self):    
+    self.bytes = bytearray(0)
+    self.error = 'Starting'
+    self.sock = socket.socket()
+    self.sock.settimeout(20)
+    try:
+      self.sock.connect( (conf.dxClHost, conf.dxClPort) )
+    except:
+      self.error = "Failed to connect to " + self.addr
+      return
+    self.sock.settimeout(1)
     for i in range(10):
       try:
-        self.tn.open(conf.dxClHost, conf.dxClPort, 10)
-        self.tn.read_until(b"login:", 10)
-        self.tn.write(conf.user_call_sign.encode('utf-8', errors='ignore') + b"\n")		# user_call_sign may be Unicode
-        break
+        self.bytes += self.sock.recv(1024)
       except:
-        time.sleep(0.5)
+        pass
+      if b"login:" in self.bytes:
+        break
+    else:
+      self.error = 'No "login:" prompt from ' + self.addr
+      return
+    self.sock.sendall(conf.user_call_sign.encode('utf-8', errors='ignore') + b"\r\n")
     if conf.dxClPassword:
-      self.tn.read_until(b"Password: ")
-      self.tn.write(conf.dxClPassword.encode('utf-8', errors='ignore') + b"\n")
+      for i in range(10):
+        try:
+          self.bytes += self.sock.recv(1024)
+        except:
+          pass
+        if b"Password:" in self.bytes:
+          break
+      else:
+        self.error = 'No "Password:" prompt from ' + self.addr
+        return
+      self.sock.sendall(conf.dxClPassword.encode('utf-8', errors='ignore') + b"\r\n")
+    self.error = ''
+    self.bytes = bytearray(0)
 
-  def telnetRead(self):
-    message = self.tn.read_until(b'\n', 60).decode(encoding='utf-8', errors='replace')
-    if self.doQuit.isSet() == False:
-      dxEntry = DxEntry();
-      if dxEntry.parseMessage(message):
-        for i, listElement in enumerate(self.dxSpots):
-          if (listElement.equal(dxEntry)):
-            listElement.join (dxEntry)
-            return
-          if listElement.isExpired():
-            del (self.dxSpots[i])
-        self.dxSpots.append(dxEntry)
-        if self.listener:
-          self.listener()
-        
-  def getHost(self):
-    return self.tn.host + ':' + str(self.tn.port)
+  def Poll(self):
+    with self.dxLock:
+      index = self.bytes.find(b"\n")
+      if index >= 0:
+        message = self.bytes[0:index + 1]
+        self.bytes = self.bytes[index + 1:]
+      else:
+        return
+    message = message.decode(encoding='utf-8', errors='replace')
+    dxEntry = DxEntry()
+    if dxEntry.parseMessage(message):
+      for i, listElement in enumerate(self.dxSpots):
+        if (listElement.equal(dxEntry)):
+          listElement.join (dxEntry)
+          return True
+        if listElement.isExpired():
+          del (self.dxSpots[i])
+      self.dxSpots.append(dxEntry)
+      return True
         
   def stop(self):
     self.doQuit.set()
+
+  def dxStatus(self):
+    if self.error:
+      return self.error
+    nSpots = len(self.dxSpots)
+    if nSpots == 0:
+      return self.msg_no_spots
+    elif nSpots == 1:
+      return self.msg_one_spot
+    return str(nSpots) + self.msg_spots

hiqsdr/quisk_hardware.py

@@ -402,6 +402,8 @@ class Hardware(BaseHardware):
     if do_tx:
       try:
         self.rx_udp_socket.send(s)
+        if DEBUG:
+          self.PrintStatus(' Send', self.want_udp_status)
       except:
         pass
   def SetVNA(self, key_down=None, vna_start=None, vna_stop=None, vna_count=None, do_tx=False):

multuspkg/quisk_hardware.py

@@ -91,6 +91,8 @@ class Hardware(BaseHardware):
     conf.si570_direct_control = False
     conf.si570_xtal_freq = 114285000
     conf.repeater_delay = 0.25
+    self.ptt_count = 200 
+    self.ptt_on = 0
     BaseHardware.__init__(self, app, conf)
     QS.set_sparams(multus_cw_samples=1)
     self.use_softrock = True
@@ -104,6 +106,13 @@ class Hardware(BaseHardware):
       self.usb_dev.ctrl_transfer(OUT, address, self.si570_i2c_address + 0x700, 0, message)
     if DEBUG:
       print ("USB send to 0x%X" % address, message)
+  def TransferIn(self, address, length):
+    if self.usb_dev:
+      recv = self.usb_dev.ctrl_transfer(IN, address, self.si570_i2c_address + 0x700, 0, length)
+      if DEBUG:
+        print ("USB receive from 0x%X" % address, recv)
+      return recv
+    return None
   def open(self):
     text = BaseHardware.open(self)
     self.InitKeyer()
@@ -120,8 +129,20 @@ class Hardware(BaseHardware):
         print ("Mode is not CW")
     self.TransferOut(0x70, cw_mode)
     return ret
-  def PollCwKey(self):  # Called frequently by Quisk to check the CW key status
+  def PollCwKey(self):  # Called frequently from the sound thread to check the CW key status
     return	# Quisk is always in Rx
+  def PollGuiControl(self):	# Called frequently from the GUI thread
+    self.ptt_count -= 1
+    if self.ptt_count <= 0:
+      self.ptt_count = 200 
+      reply = self.TransferIn(0xA5, 1)
+      if DEBUG:
+        print ("PollGuiControl got", reply)
+      if reply:
+        ptt = reply[0]	# This is 255 for error
+        if ptt in (0, 1) and ptt != self.ptt_on:
+          self.ptt_on = ptt
+          self.application.pttButton.SetValue(ptt, True)
   def InitKeyer(self):
     # Initialize the keyer parameters
     conf = self.conf

quisk.py

@@ -1434,12 +1434,8 @@ class ConfigStatus(wx.ScrolledCanvas):
     self.MakeRow2("Sample interrupts", self.interrupts, cfile)
     self.MakeRow2("Microphone or DGT level dB", level, qfile)
     self.MakeRow2("FFT number of points", self.fft_size, err_msg)
-    if conf.dxClHost:		# connection to dx cluster
-      nSpots = len(application.dxCluster.dxSpots)
-      if nSpots > 0:
-        msg = str(nSpots) + ' DX spot' + ('' if nSpots==1 else 's') + ' received from ' + application.dxCluster.getHost()
-      else:
-        msg = "No DX Cluster data from %s" % conf.dxClHost
+    if application.dxCluster:
+      msg = application.dxCluster.dxStatus()
       self.MakeRow2("FFT number of errors", self.fft_error, msg)
     else:
       self.MakeRow2("FFT number of errors", self.fft_error)
@@ -2123,7 +2119,7 @@ class GraphScreen(wx.Window):
     """For mouse clicks in our display, translate to our screen coordinates."""
     mouse_x, mouse_y = event.GetPosition()
     win = event.GetEventObject()
-    if win is not self:
+    if win and win is not self:
       x, y = win.GetPosition().Get()
       mouse_x += x
       mouse_y += y
@@ -3524,6 +3520,7 @@ class App(wx.App):
     if not os.path.isdir(self.QuiskFilesDir):
       self.QuiskFilesDir = DefaultConfigDir
     self.std_out_err = StdOutput(self)
+    self.std_out_err.Logfile("WxPython " + wx.version())
     QS.set_params(quisk_is_vna=0)	# We are not the VNA program
     # Read in configuration from the selected radio
     self.BandPlan = []
@@ -3614,6 +3611,7 @@ class App(wx.App):
         setattr(conf, 'widgets_file_name',  '')
     Hardware = self.Hardware
     self.use_fast_heart_beat = hasattr(Hardware, "FastHeartBeat")
+    self.poll_gui_control = hasattr(Hardware, "PollGuiControl")
     # Initialization - may be over-written by persistent state
     self.local_conf.Initialize()
     self.clip_time0 = 0		# timer to display a CLIP message on ADC overflow
@@ -3989,6 +3987,7 @@ class App(wx.App):
       minh = 100
       maxh = -1
     self.main_frame.SetSizeHints(minw, minh, maxw, maxh)
+    self.main_frame.SetClientSize(wx.Size(width, self.height))
     if hasattr(Hardware, 'pre_open'):       # pre_open() is called before open()
       Hardware.pre_open()
     if self.local_conf.GetWidgets(self, Hardware, conf, frame, gbs, vertBox):
@@ -4028,7 +4027,6 @@ class App(wx.App):
     if conf.dxClHost:
       # create DX Cluster and register listener for change notification
       self.dxCluster = dxcluster.DxCluster()
-      self.dxCluster.setListener(self.OnDxClChange)
       self.dxCluster.start()
     # Create shortcut keys for buttons
     if conf.button_layout == 'Large screen':
@@ -4379,8 +4377,6 @@ class App(wx.App):
                 conf.tx_ip, conf.tx_audio_port,
                 conf.mic_sample_rate, conf.mic_channel_I, conf.mic_channel_Q,
 				0.7, conf.mic_playback_rate)
-  def OnDxClChange(self):
-    self.station_screen.Refresh()
   def OnIdle(self, event):
     if self.screen:
       self.screen.OnIdle(event)
@@ -6455,6 +6451,8 @@ class App(wx.App):
       self.hamlib_com2_handler.Process()
     if self.use_fast_heart_beat:
       Hardware.FastHeartBeat()
+    if self.poll_gui_control:
+      Hardware.PollGuiControl()
     if conf.do_repeater_offset:
       hold = QS.tx_hold_state(-1)
       if hold == 2:	# Tx is being held for an FM repeater TX frequency shift
@@ -6635,6 +6633,9 @@ class App(wx.App):
           self.ChangeDisplayFrequency(tune - vfo, vfo)
         self.FldigiPoll()
         self.HamlibPoll()
+        if self.dxCluster:
+          if self.dxCluster.Poll():
+            self.station_screen.Refresh()
       if self.timer - self.slowheart_time0 > 0.5:
         self.slowheart_time0 = self.timer
         if self.w_phase:

quisk_hardware_model.py

@@ -120,6 +120,8 @@ class Hardware:
     self.application.bandscope_clock = clock
   #def PollCwKey(self):  # Optional. Called frequently by the sound thread to check the CW key status.
   #  pass        # Do not define if not needed.
+  #def PollGuiControl(self):  # Optional. Called frequently by the GUI thread to change GUI settings (PTT etc.)
+  #  pass        # Do not define if not needed.
   def StartSamples(self):	# Quisk calls this from the sound thread to start sending samples.
     # If you return a string, it replaces the string returned from hardware open()
     pass

setup.py

@@ -7,7 +7,7 @@ import os
 # You must define the version here.  A title string including
 # the version will be written to __init__.py and read by quisk.py.
 
-Version = '4.2.38'
+Version = '4.2.40'
 
 fp = open("__init__.py", "w")	# write title string
 fp.write("#Quisk version %s\n" % Version)