Quisk version 4.2.34

CHANGELOG.txt

@@ -1,3 +1,35 @@
+Quisk Version 4.2.34  May 2024
+==============================
+For the Hermes-Lite2 the inhibit Tx function (CN8) now releases the Spot button.
+
+Quisk displays the band plan below the X-axis as colored bars, and there are eighteen possible colors.
+If you hover the mouse over a bar, Quisk now displays the name of the mode. Recall that there is a dialog
+box so you can set the band plan to what you want.
+ 
+Quisk Version 4.2.33  May 2024
+==============================
+Added the get_level Hamlib command "l STRENGTH". It returns the S-meter reading. I finally found some Hamlib
+documentation, often not an easy task.  The return value of STRENGTH is in dB with zero dB equal to S9.
+There are 6 dB per S-unit. So a STRENGTH of 4 is 4dB over S9, and -6, -12, -18 is S8, S7, S6. I also added
+the corresponding FlexRadio command ZZSM.
+
+Quisk Version 4.2.32  April 2024
+================================
+I found and fixed a bug in the microphone filters that can result in a buffer overrun. You should update Quisk.
+
+Some Linux digital programs can not use the usual Quisk Pulse loopback device and must use an
+Alsa loopback. I added more documentation for Alsa loopbacks, added more information on the Sound
+screen and I changed the default Alsa sample size to 16 bit.
+
+Quisk now responds to the Hermes Lite2 Tx inhibit input by displaying a message and extinguishing the "Tx" light.
+There is a new item "Hermes Lite2 protocol" on the Hardware screen to control this behavior.
+
+Quisk Version 4.2.31  March 2024
+================================
+The "Tune" item was missing from the Midi menus. I fixed it but I didn't test it because I did
+not borrow Ben's Midi controller. Please test it yourself and let me know if it works. The Midi
+speed can be set from the menu too.
+
 Quisk Version 4.2.30  March 2024
 ================================
 A new option "Tx-Rx silence msec" on the Timing configuration screen controls how long

__init__.py

@@ -1,2 +1,2 @@
-#Quisk version 4.2.30
+#Quisk version 4.2.34
 from .quisk import main

configure.py

@@ -170,12 +170,16 @@ class Configuration:
         radio_dict["Hermes_BandDictTx"] = {}
   def UpdateGlobals(self):
     self.RadioName = Settings[1]
+    application.BandPlanC2T = {}
     if self.RadioName == "ConfigFileRadio":
       application.BandPlan = conf.BandPlan
+      for mode, color in conf.BandPlanColors:
+        application.BandPlanC2T[color] = mode
     elif "BandPlanColors" in Settings[4] and "BandPlan" in Settings[4]:
       mode_dict = {"End":None}
       for mode, color in Settings[4]["BandPlanColors"]:
         mode_dict[mode] = color
+        application.BandPlanC2T[color] = mode
       plan = []
       for freq, mode in Settings[4]["BandPlan"]:
         freq = int(float(freq) * 1E6 + 0.1)
@@ -188,6 +192,8 @@ class Configuration:
       application.BandPlan = plan
     else:
       application.BandPlan = conf.BandPlan
+      for mode, color in conf.BandPlanColors:
+        application.BandPlanC2T[color] = mode
     if "MidiNoteDict" not in Settings[4]:
       Settings[4]["MidiNoteDict"] = {}
       self.settings_changed = True
@@ -1484,7 +1490,7 @@ class MidiKnob(QuiskControl):
     self.menu = wx.Menu()
     for name in application.midiControls:
       ctrl, func = application.midiControls[name]
-      if not ctrl or not func:
+      if name != "Tune" and (not ctrl or not func):
         continue
       item = self.menu.Append(-1, name)
       self.Bind(wx.EVT_MENU, self.OnMenu, item)
@@ -1519,7 +1525,7 @@ class MidiJogWheel(QuiskControl):
     controls = wx.Menu()
     for name in application.midiControls:
       ctrl, func = application.midiControls[name]
-      if not ctrl or not func:
+      if name != "Tune" and (not ctrl or not func):
         continue
       item = controls.Append(-1, name)
       self.Bind(wx.EVT_MENU, self.OnMenu, item)
@@ -2005,7 +2011,7 @@ class ControlMixin:
       if self.radio_name == Settings[1]:	# changed for current radio
         if name in ('hot_key_ptt_toggle', 'hot_key_ptt_if_hidden', 'keyupDelay', 'cwTone', 'pulse_audio_verbose_output',
                     'start_cw_delay', 'start_ssb_delay', 'maximum_tx_secs', 'quisk_serial_cts', 'quisk_serial_dsr',
-                    'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec'):
+                    'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec', 'hermes_lite2_enable'):
           setattr(conf, name, x)
           application.ImmediateChange(name)
         elif name[0:4] in ('lin_', 'win_'):
@@ -3399,14 +3405,20 @@ class RadioSound(BaseWindow):		# The Sound page in the second-level notebook for
     ('', '', '', '', 'digital_rx8_name'),
     ('', '', '', '', 'digital_rx9_name'),
     )
+  hRx0 = "This is almost the same as the radio sound, but it is sent to a digital mode program on a different sound device."\
+" It is analog audio and it is only sent if one of the DGT- modes is selected."\
+" The volume is set by the digital output level instead of the volume control so you can mute the speaker if desired."\
+" It can receive a greater bandwidth than the 3000 Hz limit of SSB."
+  hTx0 = "This is used instead of the microphone when one of the DGT- modes is selected."\
+" The normal speech clipping and filtering is not used for DGT- modes."
   label_help = (	# Same order as sound_names
     (1, "Radio Sound Output",   "This is the radio sound going to the headphones or speakers."),
     (0, "Microphone Input",     "This is the monophonic microphone source.  Set the channel if the source is stereo."),
     (0, "I/Q Rx Sample Input",  "This is the sample source if it comes from a sound device, such as a SoftRock."),
     (1, "I/Q Tx Sample Output", "This is the transmit sample audio sent to a SoftRock."),
     (1, "Raw Digital Output",   "This sends the received I/Q data to another program as stereo."),
-    (0, "Digital Tx0 Input",    "This is the transmit audio coming from a digital mode program."),
-    (1, "Digital Rx0 Output",   "This is the main receiver Rx0 audio going to a digital mode program."),
+    (0, "Digital Tx0 Input",    hTx0),
+    (1, "Digital Rx0 Output",   hRx0),
     (1, "Digital Rx1 Output",   "This is the sub-receiver 1 audio going to a digital mode program."),
     (1, "Digital Rx2 Output",   "This is the sub-receiver 2 audio going to a digital mode program."),
     (1, "Digital Rx3 Output",   "This is the sub-receiver 3 audio going to a digital mode program."),
@@ -3978,28 +3990,7 @@ class BandPlanDlg(wx.Dialog, ControlMixin):
     if "BandPlanColors" in Settings[4] and "BandPlan" in Settings[4]:
       colors = Settings[4]["BandPlanColors"]
     else:
-      Get = conf.__dict__.get	# Get colors from the user's config file, if any.
-      dflt = "#555555"
-      colors = [
-        ['CW, General',		Get("CW",	dflt)],
-        ['CW, Extra',		Get("eCW",	dflt)],
-        ['Phone, General',	Get("Phone",	dflt)],
-        ['Phone, Extra',	Get("ePhone",	dflt)],
-        ['AM',			Get("AM",	dflt)],
-        ['Data',		Get("Data",	dflt)],
-        ['DxData',		Get("DxData",	dflt)],
-        ['RTTY',		Get("RTTY",	dflt)],
-        ['SSTV',		Get("SSTV",	dflt)],
-        ['Packet',		Get("Packet",	dflt)],
-        ['Beacons',		Get("Beacons",	dflt)],
-        ['Satellite',		Get("Satellite",dflt)],
-        ['Repeater out',	Get("Repeater",	dflt)],
-        ['Repeater in',		Get("RepInput",	dflt)],
-        ['Simplex',		Get("Simplex",	dflt)],
-        ['Rx only',		Get("RxOnly",	dflt)],
-        ['Special',		Get("Special",	dflt)],
-        ['Other',		Get("Other",	dflt)]
-      ]
+      colors = conf.BandPlanColors
     self.modes = []
     self.color_dict = {None:"End"}
     self.mode_dict = {"End":None}
@@ -4206,6 +4197,9 @@ The mode begins at the start frequency and ends at the next frequency.'
       plan.append([hertz, color])
     Settings[4]["BandPlan"] = freq_mode
     application.BandPlan = plan
+    application.BandPlanC2T = {}
+    for mode, color in mode_color:
+      application.BandPlanC2T[color] = mode
     local_conf.settings_changed = True
     self.EndModal(wx.ID_OK)
   def OnCancel(self, event):

docs.html

@@ -1470,22 +1470,29 @@ remember the settings.
 <br>
 
 <br>
-If you don't have PulseAudio or don't want to use it, you can use the ALSA loopback device.
-The ALSA loopback device works the same way as the Windows VAC. First
-create the loopback device with the command "modprobe snd-aloop" (you
-will need to be root). You can create the loopback device
-when the system starts, but the way to do that depends on your version of
-Linux. I added snd-aloop to /etc/modules.  You could put the modprobe command in /etc/rc.local instead.
+If your digital program only uses Alsa devices or you don't want to use PulseAudio,
+you can use the ALSA loopback device.
+It works the same way as the Windows VAC. First create the loopback device with this command:
+<pre>
+sudo modprobe snd-aloop index=19
+</pre>
+The "index" is the card number, and it is best to use a number higher than your regular cards.
+The loopback device will be gone on the next restart.
+You can create the loopback device every time the system starts, but the way to do that depends on your version of Linux.
+You could add this line to /etc/modprobe.d/alsa-base.conf:
+<pre>
+options snd-aloop index=19
+</pre>
+Or you could add snd-aloop to /etc/modules or put the modprobe command in /etc/rc.local instead.
 Restart Linux. Now you can enter "cat /proc/asound/cards" to
-print out your sound cards, and you should see a "Loopback" card
-listed. The cards are also shown on the Quisk Sound
-screen. The Loopback card has one side that connects to Quisk and
+print out your sound cards, and you should see a "Loopback" card listed.
+The Loopback card has one side that connects to Quisk and
 another side that connects to your digital program. For the Quisk
-side connect both Digital Input and Digital Output to Loopback,0.
+side connect both Digital Input and Digital Output to the Loopback at hw:19,0.
 Note that the Loopback card is full duplex, and handles both
 input and output. There are actually eight loopbacks created at once,
 but we are only using subdevice 0. For the digital program side, set the input and
-output to "Loopback,1".
+output to the Loopback at hw:19,1.
 Your audio is now connected and you
 should be able to receive digital signals. Be sure to test your
 transmit signal off the air. You may need to reduce power to

microphone.c

@@ -372,7 +372,7 @@ static void process_alc(complex double * cSamples, int count, struct alc * pt, r
 
 static int tx_filter(complex double * filtered, int count)
 {	// Input samples are creal(filtered), output is filtered.  The input rate must be 8000 or 48000 sps.
-	int i, is_ssb;
+	int i, is_ssb, mic_interp;
 	int sample_rate = 8000;
 	double dsample, dtmp, magn;
 	complex double csample;
@@ -423,9 +423,10 @@ static int tx_filter(complex double * filtered, int count)
 		}
 		return 0;
 	}
+	mic_interp = MIC_OUT_RATE / sample_rate;
 	// check size of dsamples[] and csamples[] buffer
 	if (count > samples_size) {
-		samples_size = count * 2;
+		samples_size = count * 2 * mic_interp;
 		if (dsamples)
 			free(dsamples);
 		if (csamples)
@@ -541,8 +542,8 @@ static int tx_filter(complex double * filtered, int count)
 		// remove clipping distortion
 		count = quisk_cDecimate(csamples, count, &cfiltAudio3, 1);
 		// Interpolate up to 48000
-		if (MIC_OUT_RATE != sample_rate)
-			count = quisk_cInterpolate(csamples, count, &cfiltInterp, MIC_OUT_RATE / sample_rate);
+		if (mic_interp != 1)
+			count = quisk_cInterpolate(csamples, count, &cfiltInterp, mic_interp);
 		// convert back to 16 bits
 		for (i = 0; i < count; i++) {
 			filtered[i] = csamples[i] * CLIP16;
@@ -573,8 +574,8 @@ static int tx_filter(complex double * filtered, int count)
 		// remove clipping distortion
 		count = quisk_dFilter(dsamples, count, &dfiltAudio3);
 		// Interpolate up to 48000
-		if (MIC_OUT_RATE != sample_rate)
-			count = quisk_dInterpolate(dsamples, count, &dfiltInterp, MIC_OUT_RATE / sample_rate);
+		if (mic_interp != 1)
+			count = quisk_dInterpolate(dsamples, count, &dfiltInterp, mic_interp);
 		// convert back to 16 bits
 		for (i = 0; i < count; i++) {
 			filtered[i] = dsamples[i] * CLIP16;

quisk.c

@@ -155,6 +155,7 @@ static int freedv_monitor;		// pass the Freedv audio to the speakers instead of
 
 static complex double PySampleBuf[SAMP_BUFFER_SIZE];	// buffer for samples returned from Python
 static int PySampleCount;				// count of samples in buffer
+static bool quisk_tx_inhibit;
 
 static int multirx_data_width;			// width of graph data to return
 static int multirx_fft_width;			// size of FFT samples
@@ -2741,7 +2742,7 @@ int quisk_process_samples(complex double * cSamples, int nSamples)
 				multirx_cSamples[0][i] = dsamples2[i] + I * dsamples2[i];
 			process_agc(&Agc3, multirx_cSamples[0], n, 0);
 		}
-		play_sound_interface(quiskPlaybackDevices[QUISK_INDEX_SUB_RX1], n, multirx_cSamples[0], 1, 1.0);
+		play_sound_interface(quiskPlaybackDevices[QUISK_INDEX_SUB_RX1], n, multirx_cSamples[0], 1, digital_output_level);
 	}
 
 	// Perhaps decimate by an additional fraction
@@ -3156,6 +3157,8 @@ static PyObject * get_params(PyObject * self, PyObject * args)
 		return PyInt_FromLong(quisk_serial_ptt);
 	if (strcmp(name, "hl2_txbuf_errors") == 0)
 		return PyInt_FromLong(hl2_txbuf_errors);
+	if (strcmp(name, "quisk_tx_inhibit") == 0)
+		return PyInt_FromLong((long)quisk_tx_inhibit);
 	Py_INCREF (Py_None);
 	return Py_None;
 }
@@ -3759,6 +3762,7 @@ static int read_rx_udp10(complex double * samp)	// Read samples from UDP using t
 				//code_version = quisk_hermes_to_pc[3];
 				if ((quisk_hermes_to_pc[0] & 0x01) != 0)	// C1
 					quisk_sound_state.overrange++;
+				quisk_tx_inhibit = (quisk_hermes_to_pc[0] & 0x02) == 0;	// should limit to Hermes Lite2 only
 				hardware_ptt = buf[start] & 0x01;	// C0 bit zero is PTT
 				quisk_hardware_cwkey = (buf[start] & 0x04) >> 2;	// C0 bit two is CW key state
 				switch (hl2_txbuf_state) {
@@ -3870,6 +3874,10 @@ static int read_rx_udp17(complex double * cSamples0)	// Read samples from UDP
 	fft_data * ptFFT;
 	fd_set fds;
 	static int block_number=0;
+	static complex double dc_average = 0;		// Average DC component in samples
+	static complex double dc_sum = 0;
+	static int dc_count = 0;
+	static time_t time0 = 0;
 	// Data from the receiver is little-endian
 
 	if ( ! rx_udp_gain_correct) {	// correct for second stage CIC decimation JIM JIM
@@ -3975,6 +3983,16 @@ static int read_rx_udp17(complex double * cSamples0)	// Read samples from UDP
 			if (xr & 0x100) {		// channel 1
 				if (quisk_invert_spectrum)		// Invert spectrum
 					sample = conj(sample);
+				// correct the DC level
+				dc_sum += sample;
+				dc_count++;
+				sample -= dc_average;
+				if (dc_count >= 48000 && time(NULL) != time0) {
+					time0 = time(NULL);
+					dc_average = dc_sum / dc_count;
+					dc_sum = dc_count = 0;
+					//printf ("New DC average %.0lf\n", cabs(dc_average));
+				}
 				// Put samples into the fft input array.
 				ptFFT = fft_data_array + fft_data_index;
 				if ( ! (xi & 0x100)) {		// zero marker for start of first block

quisk.h

@@ -320,6 +320,7 @@ extern int quisk_start_cw_delay;		// milliseconds to delay output on serial or M
 extern int quisk_start_ssb_delay;		// milliseconds to discard output for all modes except CW
 extern struct sound_dev * quiskPlaybackDevices[];	// array of Playback sound devices
 extern int quisk_close_file_play;
+extern double digital_output_level;
 
 extern PyObject * quisk_set_spot_level(PyObject * , PyObject *);
 extern PyObject * quisk_get_tx_filter(PyObject * , PyObject *);

quisk.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python3
 
-# All QUISK software is Copyright (C) 2006-2021 by James C. Ahlstrom.
+# All QUISK software is Copyright (C) 2006-2024 by James C. Ahlstrom.
 # This free software is licensed for use under the GNU General Public
 # License (GPL), see http://www.opensource.org.
 # Note that there is NO WARRANTY AT ALL.  USE AT YOUR OWN RISK!!
@@ -658,6 +658,16 @@ class HamlibHandlerSerial:
       self.app.pttButton.SetValue(0, True)
     else:
       self.Error(cmd, data)
+  def ZZSM(self, cmd, data, length):	# return the S-meter value in dB * 2; 0 to 260
+    if length == 0:			# 0 to 260 is -140 to -10 dB; S9 == -73 dB == 134; dB = ZZSM / 2 - 140
+      i = round((self.app.hamlib_strength + 67) * 2)
+      if i < 0:
+        i = 0
+      elif i > 260:
+        i = 260
+      self.Write('%s%03d;' % (cmd, i))
+    else:
+      self.Error(cmd, data)
   def ZZSP(self, cmd, data, length):	# the split status
     if length == 0:
       if self.app.split_rxtx:
@@ -1151,7 +1161,7 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
   def GetLevel(self):
     name = self.GetParamName()
     if name == '?':	# send back supported parameters
-      self.Reply2('AGC AF', 0)
+      self.Reply2('AGC AF STRENGTH', 0)
     elif name == 'AGC':
       if self.app.BtnAGC.GetValue():
         self.Reply2(4, 0)
@@ -1160,6 +1170,9 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
     elif name == 'AF':
       x = self.app.audio_volume	# audio_volume is 0 to 1.000
       self.Reply2("%.5f" % x, 0)
+    elif name == 'STRENGTH':
+      i = round(self.app.hamlib_strength)
+      self.Reply2(i, 0)
     else:
       self.ErrParam()
   def SetLevel(self):
@@ -1762,6 +1775,12 @@ class GraphDisplay(wx.Window):
       dc.SetTextForeground(conf.color_graph_msg_fg)
       dc.SetBackgroundMode(wx.SOLID)
       dc.DrawText(self.display_text, 0, 0)
+    if application.tx_inhibit:
+      dc.SetFont(self.font)
+      dc.SetTextBackground(conf.color_graph_msg_bg)
+      dc.SetTextForeground("red")
+      dc.SetBackgroundMode(wx.SOLID)
+      dc.DrawText(" *** Tx Inhibit ***", 0, self.chary * 15 // 10)
   def DrawFilter(self, dc):
     dc.SetPen(wx.TRANSPARENT_PEN)
     dc.SetLogicalFunction(wx.COPY)
@@ -1873,6 +1892,12 @@ class GraphScreen(wx.Window):
     self.Bind(wx.EVT_LEFT_UP, self.OnLeftUp)
     self.Bind(wx.EVT_MOTION, self.OnMotion)
     self.Bind(wx.EVT_MOUSEWHEEL, self.OnWheel)
+    # handle bandplan info
+    self.bandplanWindow = wx.PopupWindow (parent)
+    self.bandplanInfo = wx.TextCtrl(self.bandplanWindow, style=wx.TE_READONLY)
+    self.bandplanInfo.SetFont(wx.Font(conf.status_font_size, wx.FONTFAMILY_SWISS, wx.NORMAL,
+        wx.FONTWEIGHT_NORMAL, False, conf.quisk_typeface))
+    self.bandplanWindow.Hide(); 
     self.MakeDisplay()
   def MakeDisplay(self):
     self.display = GraphDisplay(self, self.originX, 0, self.graph_width, 5, self.chary)
@@ -2224,6 +2249,44 @@ class GraphScreen(wx.Window):
           self.ChangeHwFrequency(self.txFreq, self.VFO, 'MouseMotion', event=event, rx_freq=freq2)
         else:					# Mouse motion changes the transmit frequency
           self.ChangeHwFrequency(self.txFreq + freq, self.VFO, 'MouseMotion', event=event)
+    else:
+      mouse_x, mouse_y = self.GetMousePosition(event)
+      if not self.in_splitter and self.originY <= mouse_y <= self.originY + self.tick and (
+            self.originX <= mouse_x <= self.originX + self.graph_width):
+        #sample_rate = int(self.sample_rate * self.zoom)	# Measure the frequency
+        #freq = float(mouse_x - self.x0) * sample_rate / self.data_width + self.zoom_deltaf + self.VFO
+        #freq = int(freq)
+        #color = None
+        #for start_freq, start_color in application.BandPlan:
+        #  if start_freq >= freq:
+        #    break
+        #  color = start_color
+        dc = wx.ClientDC(self)	# Read the pixel at the mouse position
+        pixel = dc.GetPixel(mouse_x, mouse_y)
+        pixel = "#%02X%02X%02X" % (pixel[0], pixel[1], pixel[2])
+        txt = application.BandPlanC2T.get(pixel, '')
+        if pixel == "#000000":
+          pass
+        elif txt:
+          self.bandplanInfo.Clear()
+          self.bandplanInfo.write(txt)
+          width, height = self.bandplanInfo.GetTextExtent(txt)
+          width += self.bandplanInfo.GetCharWidth() * 2
+          height += self.bandplanInfo.GetCharHeight() // 2
+          self.bandplanInfo.SetSize(wx.Size(width, height))
+          self.bandplanWindow.SetClientSize((width, height))
+          rect = self.GetScreenRect()
+          if mouse_x > self.originX + self.graph_width * 3 // 4:
+            self.bandplanWindow.Move(mouse_x + rect.GetX() - width, mouse_y + rect.GetY() - height * 12 // 10)
+          else:
+            self.bandplanWindow.Move(mouse_x + rect.GetX(), mouse_y + rect.GetY() - height * 12 // 10)
+          if not self.bandplanWindow.IsShown():
+            self.bandplanWindow.Show()
+        else:
+          if self.bandplanWindow.IsShown():
+            self.bandplanWindow.Hide()
+      elif self.bandplanWindow.IsShown():
+        self.bandplanWindow.Hide()
   def OnWheel(self, event):
     if conf.freq_spacing:
       wm = conf.freq_spacing
@@ -3497,6 +3560,8 @@ class App(wx.App):
     self.midi_message = []
     self.idName2Button = {}
     self.midi_handler = None
+    self.tx_inhibit = 0
+    self.old_tx_inhibit = 0
     if conf.use_rx_udp == 10:		# Hermes UDP protocol
       self.bandscope_clock = conf.rx_udp_clock
     else:
@@ -3557,6 +3622,7 @@ class App(wx.App):
     self.smeter_avg_seconds = 1.0	# seconds for S-meter average
     self.smeter_sunits = -87.0
     self.smeter_usage = "smeter"	# specify use of s-meter display
+    self.hamlib_strength = 0.0;
     self.timer = time.time()		# A seconds clock
     self.heart_time0 = self.timer	# timer to call HeartBeat at intervals
     self.save_time0 = self.timer
@@ -5035,6 +5101,7 @@ class App(wx.App):
     self.smeter_sunits_time0 = self.timer
     s = self.smeter_sunits / 6.0	# change to S units; 6db per S unit
     s += Hardware.correct_smeter	# S-meter correction for the gain, band, etc.
+    self.hamlib_strength = (s - 9.0) * 6.0	# convert to dB; 0 dB is S9
     if s < 0:
       s = 0
     if s >= 9.5:
@@ -6370,7 +6437,7 @@ class App(wx.App):
         Hardware.RepeaterOffset(0)
         QS.set_ctcss(0)
         QS.tx_hold_state(1)
-    if QS.is_key_down():	# Tx indicator
+    if QS.is_key_down() and not self.tx_inhibit:	# Tx indicator
       if not self.tx_indicator:
         self.tx_indicator = True
         self.pttButton.Tx.TurnOn(True)
@@ -6431,6 +6498,8 @@ class App(wx.App):
             self.hot_key_ptt_active = False
         self.hot_key_ptt_was_down = self.hot_key_ptt_is_down
         self.hot_key_ptt_pressed = False
+      if self.tx_inhibit:
+        ptt = False
       if ptt is True and not ptt_button_down:
         self.SetPTT(True)
       elif ptt is False and ptt_button_down:
@@ -6501,6 +6570,16 @@ class App(wx.App):
     if self.timer - self.heart_time0 > 0.10:	# call hardware to perform background tasks:
       self.heart_time0 = self.timer
       Hardware.HeartBeat()
+      if conf.hermes_lite2_enable:
+        self.tx_inhibit = QS.get_params('quisk_tx_inhibit')
+      else:
+        self.tx_inhibit = 0
+      if self.tx_inhibit != self.old_tx_inhibit:
+        self.old_tx_inhibit = self.tx_inhibit
+        self.graph.display.Refresh()
+        self.waterfall.pane1.display.Refresh()
+      if self.tx_inhibit and self.spotButton.GetValue():
+        self.spotButton.SetValue(0, True)
       msg = QS.GetQuiskPrintf()
       if msg:
         print(msg, end='')

quisk_conf_defaults.py

@@ -473,6 +473,13 @@ hermes_iob_rxin = 'J10 available'
 #hermes_iob_rxin = 'HL2 Rx to J9'
 #hermes_iob_rxin = 'Use J9 and J10'
 
+## hermes_lite2_enable			Hermes Lite2 protocol, boolean
+# This turns on some of the protocol extensions for the Hermes Lite2 that are not part
+# of the official Hermes Protocol 1. Currently this only enables Tx Inhibit (CN8).
+# Changes are immediate (no need to restart).
+hermes_lite2_enable = True
+#hermes_lite2_enable = False
+
 
 # These are known power meter calibration tables. This table is not present in the JSON settings file.
 power_meter_std_calibrations = {}
@@ -2096,6 +2103,26 @@ RxOnly	= '#AAAAAA'
 # Colors start at the indicated frequency and continue until the
 # next frequency.  The special color "None" turns off color.
 #
+BandPlanColors = [	# Display name and corresponding color
+  ['CW, General',	CW],
+  ['CW, Extra',		eCW],
+  ['Phone, General',	Phone],
+  ['Phone, Extra',	ePhone],
+  ['AM',		AM],
+  ['Data',		Data],
+  ['DxData',		DxData],
+  ['RTTY',		RTTY],
+  ['SSTV',		SSTV],
+  ['Packet',		Packet],
+  ['Beacons',		Beacons],
+  ['Satellite',		Satellite],
+  ['Repeater out',	Repeater],
+  ['Repeater in',	RepInput],
+  ['Simplex',		Simplex],
+  ['Rx only',		RxOnly],
+  ['Special',		Special],
+  ['Other',		Other]
+]
 
 
 

setup.py

@@ -7,7 +7,7 @@ import os
 # You must define the version here.  A title string including
 # the version will be written to __init__.py and read by quisk.py.
 
-Version = '4.2.30'
+Version = '4.2.34'
 
 fp = open("__init__.py", "w")	# write title string
 fp.write("#Quisk version %s\n" % Version)

sound.c

@@ -85,7 +85,7 @@ char * sound_format_names[4] = {"Int32", "Int16", "Float32", "Int24"} ;
 static struct wav_file file_rec_audio, file_rec_samples, file_rec_mic;
 static int close_file_rec;
 
-static double digital_output_level = 0.7;
+double digital_output_level = 0.7;
 static int dc_remove_bw=100;			// bandwidth of DC removal filter
 
 static ty_sample_start pt_sample_start;

sound_alsa.c

@@ -495,8 +495,37 @@ static snd_pcm_format_t check_formats(struct sound_dev * dev, snd_pcm_hw_params_
 {
 	snd_pcm_format_t format = SND_PCM_FORMAT_UNKNOWN;
 	dev->sample_bytes = 0;
-
+#if 0
+	char * card_name;
+	int card;
+	snd_pcm_info_t * pcm_info;
+	printf("driver %s\n", snd_ctl_card_info_get_driver(info));
+	int loopback = 0;
+	if (snd_pcm_info_malloc(&pcm_info) == 0) {
+		if (snd_pcm_info (dev->handle, pcm_info) == 0) {
+			card = snd_pcm_info_get_card (pcm_info);
+			if (card >= 0) {
+				if (snd_card_get_name(card, &card_name) == 0) {
+					if (strcmp(card_name, "Loopback") == 0)
+						loopback = 1;
+					printf("name %s\n", card_name);
+					free(card_name);
+				}
+			}
+		}
+		snd_pcm_info_free(pcm_info);
+	}
+#endif
 	strMcpy (dev->msg1, "Available formats: ", QUISK_SC_SIZE);
+	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S16) == 0) {
+		if (!dev->sample_bytes) {
+			strncat(dev->msg1, "*", QUISK_SC_SIZE);
+			dev->sample_bytes = 2;
+			dev->sound_format = Int16;
+			format = SND_PCM_FORMAT_S16;
+		}
+		strncat(dev->msg1, "S16 ", QUISK_SC_SIZE);
+	}
 	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S32) == 0) {
 		if (!dev->sample_bytes) {
 			strncat(dev->msg1, "*", QUISK_SC_SIZE);
@@ -515,15 +544,6 @@ static snd_pcm_format_t check_formats(struct sound_dev * dev, snd_pcm_hw_params_
 	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_U24) == 0) {
 		strncat(dev->msg1, "U24 ", QUISK_SC_SIZE);
 	}
-	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S16) == 0) {
-		if (!dev->sample_bytes) {
-			strncat(dev->msg1, "*", QUISK_SC_SIZE);
-			dev->sample_bytes = 2;
-			dev->sound_format = Int16;
-			format = SND_PCM_FORMAT_S16;
-		}
-		strncat(dev->msg1, "S16 ", QUISK_SC_SIZE);
-	}
 	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S24_3LE) == 0) {
 		if (!dev->sample_bytes) {
 			strncat(dev->msg1, "*", QUISK_SC_SIZE);