Quisk version 4.2.41

CHANGELOG.txt

@@ -1,3 +1,45 @@
+Quisk Version 4.2.41  January 2025
+==================================
+I made some improvements to the top-level Config/Radios screen. There is now an option to
+make a new radio by copying settings from an existing radio. I worked around a bug in wxPython
+and gtk3 that caused drawing problems on the config screens. This problem is not present on Windows.
+
+Quisk Version 4.2.40  November 2024
+===================================
+Python 3.13 eliminated the telnetlib module, so I wrote a replacement. I fixed a bug in window sizing.
+If you use the Dx Cluster feature, please report any problems. Dx Cluster used to use the telnetlib module
+but is now new code.
+
+I updated the install to Python 3.13. Please report any problems with Python 3.13.
+
+Quisk Version 4.2.39  October 2024
+==================================
+I added an optional Hardware method PollGuiControl(self). If you define this in your Hardware file,
+the GUI thread will call it frequently. It can be used to set PTT from your hardware.
+
+I am trying to work around a wxPython quirk that causes mouse wheel tuning to fail. Please test.
+
+Quisk Version 4.2.38  September 2024
+====================================
+This is a bugfix release. I fixed a bug in the Hamlib serial port when using a physical TTY instead
+of a pseudo-tty. The Hamlib ZZFA command now changes the receive frequency instead of the transmit
+frequency. I fixed some window sizing issues.
+
+Quisk Version 4.2.37  August 2024
+=================================
+Quisk now has a new option "Fixed tune offset" on the Config/radio/Options screen. This is meant for
+Softrock radios that need a constant audio frequency to simplify amplitude and phase corrections.
+The value zero means no change to Quisk tuning. Otherwise enter the fixed frequency offset from center.
+If you are using the obsolete "mouse_tune_method = 1" please delete it and use this new feature.
+If you use softrock_tune_vfo.py as your hardware file, you should replace it with softrock/hardware_usb.py.
+
+Quisk now works on Python 3.12. And I fixed a bug in the small screen graph width.
+
+Quisk Version 4.2.36  August 2024
+=================================
+I added two new color schemes by Michael, DK1MI. The On/Off button color and text color can
+now be configured. (Michael, send me the final colors).  There are a few other small changes.
+
 Quisk Version 4.2.35  June 2024
 ===============================
 There is a new item "File play level" on the Config/radio/Sound screen to reduce the volume when playing files.

__init__.py

@@ -1,2 +1,2 @@
-#Quisk version 4.2.35
+#Quisk version 4.2.41
 from .quisk import main

configure.py

@@ -48,6 +48,7 @@ name2format = {
 
 # Increasing the software version will display a message to re-read the soapy device.
 soapy_software_version = 3
+wxpython_gtk3_bug = 0
 
 def FormatKhz(dnum):	# Round to 3 decimal places; remove ending ".000"
   t = "%.3f" % dnum
@@ -284,10 +285,8 @@ class Configuration:
         self.settings_changed = True
         errors = errors + "Failed to set %s to %s using format %s\n" % (k, v, fmt)
         #traceback.print_exc()
-    if conf.color_scheme == 'B':
+    if conf.color_scheme != 'A':
-      conf.__dict__.update(conf.color_scheme_B)
+      conf.__dict__.update(getattr(conf, 'color_scheme_' + conf.color_scheme))
-    elif conf.color_scheme == 'C':
-      conf.__dict__.update(conf.color_scheme_C)
     self.RequiredValues(radio_dict)	# Why not update conf too??? This only updates the radio_dict.
     if errors:
       dlg = wx.MessageDialog(None, errors,
@@ -330,7 +329,7 @@ class Configuration:
     path = self.NormPath(path)
     if not os.path.isfile(path):
       dlg = wx.MessageDialog(None,
-        "Failure for hardware file %s!" % path,
+        "Can not find the hardware file %s!" % path,
         'Hardware File', wx.OK|wx.ICON_ERROR)
       ret = dlg.ShowModal()
       dlg.Destroy()
@@ -386,10 +385,20 @@ class Configuration:
         app.bottom_widgets = dct['BottomWidgets'](app, hardware, conf, frame, gbs, vertBox)
     return True
   def OnPageChanging(self, event):	# Called when the top level page changes (not RadioNotebook pages)
+    global wxpython_gtk3_bug
     event.Skip()
     notebook = event.GetEventObject()
     index = event.GetSelection()
     page = notebook.GetPage(index)
+    if sys.platform != 'win32':		# Work around a bug in wxPython 4.2.1 and gtk3
+      w, h = application.main_frame.GetSize()	# Change main window size by +/- one pixel to recalculate sizes
+      if wxpython_gtk3_bug:
+        wxpython_gtk3_bug = 0
+        h += 1
+      else:
+        wxpython_gtk3_bug = 1
+        h -= 1
+      application.main_frame.SetSize((w, h))
     if isinstance(page, RadioNotebook):
       if not page.pages:
         page.MakePages()
@@ -401,11 +410,12 @@ class Configuration:
     notebk.AddPage(self.radio_page, "Radios")
     self.radios_page_start = notebk.GetPageCount()
     notebk.Bind(wx.EVT_NOTEBOOK_PAGE_CHANGED, self.OnPageChanging, notebk)
+    if Settings[1] in Settings[2]:
+      page = RadioNotebook(notebk, Settings[1])
+      notebk.AddPage(page, "*%s*" % Settings[1])
     for name in Settings[2]:
+      if name != Settings[1]:
         page = RadioNotebook(notebk, name)
-      if name == Settings[1]:
-        notebk.AddPage(page, "*%s*" % name)
-      else:
         notebk.AddPage(page, name)
   def GuessType(self):
     udp = conf.use_rx_udp
@@ -420,6 +430,14 @@ class Configuration:
     elif udp > 0:
       return 'HiQSDR'
     return 'SoftRock USB'
+  def FindNotebookPage(self, name):
+    for index in range(self.radios_page_start, self.notebk.GetPageCount()):
+      tab_text = self.notebk.GetPageText(index)
+      if tab_text[0] == '*':
+        tab_text = tab_text[1:-1]
+      if tab_text == name:
+        return index
+    return None
   def AddRadio(self, radio_name, typ):
     radio_dict = {}
     radio_dict['hardware_file_type'] = typ
@@ -436,13 +454,24 @@ class Configuration:
     page = RadioNotebook(self.notebk, radio_name)
     self.notebk.AddPage(page, radio_name)
     return True
+  def CopyRadio(self, old_name, new_name):
+    radio_dict = {}
+    index = Settings[2].index(old_name)
+    radio_dict.update(Settings[3][index])
+    Settings[2].append(new_name)
+    Settings[3].append(radio_dict)
+    page = RadioNotebook(self.notebk, new_name)
+    self.notebk.AddPage(page, new_name)
+    return True
   def RenameRadio(self, old, new):
-    index = Settings[2].index(old)
+    n = self.FindNotebookPage(old)
-    n = self.radios_page_start + index
+    if n is None:
+      return
     if old == Settings[1]:
       self.notebk.SetPageText(n, "*%s*" % new)
     else:
       self.notebk.SetPageText(n, new)
+    index = Settings[2].index(old)
     Settings[2][index] = new
     self.notebk.GetPage(n).NewName(new)
     if old == "ConfigFileRadio":
@@ -453,11 +482,9 @@ class Configuration:
     index = Settings[2].index(name)
     del Settings[2][index]
     del Settings[3][index]
-    try:
+    n = self.FindNotebookPage(name)
-      n = self.radios_page_start + index
+    if n is not None:
       self.notebk.DeletePage(n)
-    except:
-      pass
       return True
   def GetRadioDict(self, radio_name=None):	# None radio_name means the current radio
     if radio_name:
@@ -479,7 +506,7 @@ class Configuration:
     for rxname, data in self.receiver_data:
       if rxname == receiver_name:
         return data
-    return None
+    return ()
   def GetReceiverDatum(self, receiver_name, item_name):
     for rxname, data in self.receiver_data:
       if rxname == receiver_name:
@@ -565,6 +592,8 @@ class Configuration:
     # self.format4name with the items that Configuration understands.
     # Dicts and lists are Python objects.  All other items are text, not Python objects.
     #
+    # This parses the quisk_conf_defaults.py file and user-defined radios in ./*pkg/quisk_hardware.py.
+    #
     # Sections start with 16 #, section name
     # self.sections is a list of [section_name, section_data]
     # section_data is a list of [data_name, text, fmt, help_text, values]
@@ -597,11 +626,11 @@ class Configuration:
       except:
         traceback.print_exc()
   def _ParserConf(self, filename):
-    re_AeqB = re.compile("^#?(\w+)\s*=\s*([^#]+)#*(.*)")		# item values "a = b"
+    re_AeqB = re.compile(r"^#?(\w+)\s*=\s*([^#]+)#*(.*)")		# item values "a = b"
     section = None
     data_name = None
     multi_line = False
-    fp = open(filename, "r")
+    fp = open(filename, "r", encoding="utf8")
     for line in fp:
       line = line.strip()
       if not line:
@@ -986,6 +1015,7 @@ class QAdjustPhase(wx.Frame):
     btnbox.Add(1, 1, proportion=10)
     btns.append(b)
     b.Bind(wx.EVT_BUTTON, self.OnBtnHelp)
+    #b.Bind(wx.EVT_BUTTON, self.OnGraphData)
     for b in btns:
       b.SetBezelWidth(3)
       b.SetBackgroundColour("#DDD")
@@ -1220,6 +1250,7 @@ class QAdjustPhase(wx.Frame):
     application.bandAmplPhase = copy.deepcopy(self.bandAmplPhase)
     self.dirty = False
   def OnBtnExit(self, event):
+    #self.OnGraphData(None)
     if self.dirty:
       dlg = wx.MessageDialog(self,
         "Your changes are not saved. Do you want to save them?", "Changes Were Made",
@@ -1245,6 +1276,27 @@ The maximum slider adjustment range can be changed on the radio Hardware screen.
 For more information, press the main "Help" button, then "Documentation", then "SoftRock".'
     , "Adjustment Help", style=wx.OK)
     dlg.ShowModal()
+  def OnGraphData(self, event):
+    if not hasattr(self, "VFO"):
+      self.VFO = []
+      self.Tune = []
+      self.Gain = []
+      self.Phase = []
+    if event:
+      self.VFO.append(application.VFO)
+      self.Tune.append(self.new_tune)
+      self.Gain.append(self.new_amplitude + 1.0)
+      self.Phase.append(self.new_phase)
+    else:
+      for name in ("VFO", "Tune", "Gain", "Phase"):
+        print ("%s = [" % name)
+        lst = getattr(self, name)
+        for i in range(0, len(lst)):
+          if name[0] in "VT":
+            print("%d," % lst[i])
+          else:
+            print("%.5f," % lst[i])
+        print ("]")
 
 class ListEditDialog(wx.Dialog):	# Display a dialog with a List-Edit control, plus Ok/Cancel
   def __init__(self, parent, title, choice, choices, width):
@@ -1271,6 +1323,7 @@ class RadioNotebook(wx.Notebook):	# The second-level notebook for each radio nam
     self.SetBackgroundColour(parent.bg_color)
     self.radio_name = radio_name
     self.pages = []
+    self.Bind(wx.EVT_NOTEBOOK_PAGE_CHANGED, self.OnPageChanging)
   def MakePages(self):
     radio_name = self.radio_name
     radio_dict = local_conf.GetRadioDict(radio_name)
@@ -1301,6 +1354,20 @@ class RadioNotebook(wx.Notebook):	# The second-level notebook for each radio nam
     self.radio_name = new_name
     for page in self.pages:
       page.radio_name = new_name
+  def OnPageChanging(self, event):
+    global wxpython_gtk3_bug
+    event.Skip()
+    index = event.GetSelection()
+    page = self.GetPage(index)
+    if sys.platform != 'win32':		# Work around a bug in wxPython 4.2.1 and gtk3
+      w, h = application.main_frame.GetSize()	# Change main window size by +/- one pixel to recalculate sizes
+      if wxpython_gtk3_bug:
+        wxpython_gtk3_bug = 0
+        h += 1
+      else:
+        wxpython_gtk3_bug = 1
+        h -= 1
+      application.main_frame.SetSize((w, h))
 
 class ChoiceCombo(wx.Choice):
   text_for_blank = "-blank-"
@@ -1415,7 +1482,13 @@ class ComboCtrl(wxcombo.ComboCtrl):
         wm = w
     wm += charx * 5
     self.SetSizeHints(wm, self.height, 9999, self.height)
+  def SetValue(self, value):
+    wxcombo.ComboCtrl.SetValue(self, value)
+    self.SetBackgroundColour(self.bgColor)
+    self.Refresh()
   def SetSelection(self, n):	# Set text to item in list box. Name conflict with wxcombo.ComboCtrl.
+    self.SetBackgroundColour(self.bgColor)
+    self.Refresh()
     try:
       text = self.choices[n]
     except IndexError:
@@ -2206,7 +2279,8 @@ class ControlMixin:
       if self.radio_name == Settings[1]:	# changed for current radio
         if name in ('hot_key_ptt_toggle', 'hot_key_ptt_if_hidden', 'keyupDelay', 'cwTone', 'pulse_audio_verbose_output',
                     'start_cw_delay', 'start_ssb_delay', 'maximum_tx_secs', 'quisk_serial_cts', 'quisk_serial_dsr',
-                    'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec', 'hermes_lite2_enable'):
+                    'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec', 'hermes_lite2_enable',
+                    'fixed_tune_offset'):
           setattr(conf, name, x)
           application.ImmediateChange(name)
         elif name[0:4] in ('lin_', 'win_'):
@@ -2237,6 +2311,9 @@ class ControlMixin:
           elif hasattr(application.Hardware, "ImmediateChange"):
             setattr(conf, name, x)
             application.Hardware.ImmediateChange(name)
+        elif name[0:6] == 'keyer_':
+          setattr(conf, name, x)
+          application.ImmediateChange(name)
   def FormatOK(self, value, fmt4):		# Check formats integer, number, boolean
     ok, v = self.EvalItem(value, fmt4)
     return ok
@@ -2300,9 +2377,9 @@ class ControlMixin:
     else:
       return value
 
-class BaseWindow(wx.ScrolledCanvas, ControlMixin):
+class BaseWindow(wx.ScrolledWindow, ControlMixin):
   def __init__(self, parent):
-    wx.ScrolledCanvas.__init__(self, parent)
+    wx.ScrolledWindow.__init__(self, parent)
     ControlMixin.__init__(self, parent)
 
 class ConfigConfig(BaseWindow):
@@ -2625,47 +2702,82 @@ class Radios(BaseWindow):	# The "Radios" first-level page
   def __init__(self, parent):
     BaseWindow.__init__(self, parent)
     self.SetBackgroundColour(parent.bg_color)
-    self.num_cols = 8
+    self.num_cols = 5
     self.radio_name = None
-    self.cur_radio_text = self.AddTextL(1, 'xx', self.num_cols - 1)
+    self.index = 0
-    self.SetCurrentRadioText()
+    txt = 'Each "radio" is a block of settings that describes a radio to use with Quisk.'
+    self.AddTextL(1, txt, self.num_cols - 1)
     self.NextRow()
     self.NextRow()
-    item = self.AddTextL(1, "When Quisk starts, use the radio")
+    self.radio_buttons = []
+    rb = self.AddRadioButton(1, "When Quisk starts, use the radio", self.NewTop, start=True)
+    rb.SetValue(True)
     self.start_radio = self.AddComboCtrl(2, 'big_radio_name', choices=[], no_edit=True)
     self.start_radio.handler = self.OnChoiceStartup
+    self.radio_buttons.append((rb, self.start_radio))
     self.NextRow()
-    item = self.AddTextL(1, "Add a new radio with the general type")
+    rb = self.AddRadioButton(1, "Add a new radio with the general type", self.NewTop)
     choices = []
     for name, data in local_conf.receiver_data:
       choices.append(name)
+    choices.sort()
     self.add_type = self.AddComboCtrl(2, '', choices=choices, no_edit=True)
     self.add_type.SetSelection(0)
     item = self.AddTextL(3, "and name the new radio")
-    self.add_name = self.AddComboCtrl(4, '', choices=["My Radio", "SR with XVtr", "SoftRock"])
+    self.add_name = self.AddComboCtrl(4, '', choices=["My Radio", "Transverter", "SoftRock", "HL2"])
-    item = self.AddPushButton(5, "Add", self.OnBtnAdd)
+    self.radio_buttons.append((rb, self.add_type, self.add_name))
     self.NextRow()
-    item = self.AddTextL(1, "Rename the radio named")
+    rb = self.AddRadioButton(1, "Add a new radio copied from radio", self.NewTop)
+    self.add_from = self.AddComboCtrl(2, 'big_radio_name', choices=[], no_edit=True)
+    item = self.AddTextL(3, "and name the new radio")
+    self.add_name2 = self.AddComboCtrl(4, '', choices=["My Radio", "Transverter", "SoftRock", "HL2"])
+    self.radio_buttons.append((rb, self.add_from, self.add_name2))
+    self.NextRow()
+    rb = self.AddRadioButton(1, "Rename the radio named", self.NewTop)
     self.rename_old = self.AddComboCtrl(2, 'big_radio_name', choices=[], no_edit=True)
     item = self.AddTextL(3, "to the new name")
-    self.rename_new = self.AddComboCtrl(4, '', choices=["My Radio", "SR with XVtr", "SoftRock"])
+    self.rename_new = self.AddComboCtrl(4, '', choices=["My Radio", "Transverter", "SoftRock", "HL2"])
-    item = self.AddPushButton(5, "Rename", self.OnBtnRename)
+    self.radio_buttons.append((rb, self.rename_old, self.rename_new))
     self.NextRow()
-    item = self.AddTextL(1, "Delete the radio named")
+    rb = self.AddRadioButton(1, "Delete the radio named", self.NewTop)
     self.delete_name = self.AddComboCtrl(2, 'big_radio_name', choices=[], no_edit=True)
-    item = self.AddPushButton(3, "Delete", self.OnBtnDelete)
+    self.radio_buttons.append((rb, self.delete_name))
     self.NextRow()
-    self.FitInside()
+    self.NextRow()
-    self.SetScrollRate(1, 1)
+    self.apply_btn = self.AddPushButton(3, "Apply", self.OnBtnApply)
     self.NewRadioNames()
-  def SetCurrentRadioText(self):
+    self.NewTop()
-    radio_dict = local_conf.GetRadioDict(self.radio_name)
+    self.SetScrollRate(1, 1)
-    radio_type = radio_dict['hardware_file_type']
+  def NewTop(self, event=None):
-    if Settings[1] == "ConfigFileRadio":
+    if event:
-      text = 'The current radio is ConfigFileRadio, so all settings come from the config file.  The hardware type is %s.' % radio_type
+      btn = event.GetEventObject()
+    else:	# set first button
+      btn = self.radio_buttons[0][0]
+    for i in range(len(self.radio_buttons)):
+      data = self.radio_buttons[i]
+      rb = data[0]
+      if rb == btn:
+        self.index = i
+      for c in data[1:]:
+        c.Enable(rb == btn)
+    if self.index == 0:
+      self.apply_btn.Enable(False)
     else:
-      text = "Quisk is running with settings from the radio %s.  The hardware type is %s." % (Settings[1], radio_type)
+      self.apply_btn.Enable(True)
-    self.cur_radio_text.SetLabel(text)
+  def OnBtnApply(self, event):
+    index = self.index
+    ok = False
+    if index == 1:	# add from hardware type
+      ok = self.OnBtnAdd()
+    elif index == 2:	# add from existing radio
+      ok = self.OnBtnCopy()
+    elif index == 3:	# rename
+      ok = self.OnBtnRename()
+    elif index == 4:	# delete
+      ok = self.OnBtnDelete()
+    if ok:
+      self.radio_buttons[0][0].SetValue(True)
+      self.NewTop()
   def DuplicateName(self, name):
     if name in Settings[2] or name == "ConfigFileRadio":
       dlg = wx.MessageDialog(self, "The name already exists.  Please choose a different name.",
@@ -2674,34 +2786,39 @@ class Radios(BaseWindow):	# The "Radios" first-level page
       dlg.Destroy()
       return True
     return False
-  def OnBtnAdd(self, event):
+  def OnBtnAdd(self):
     name = self.add_name.GetValue().strip()
     if not name or self.DuplicateName(name):
       return
     self.add_name.SetValue('')
     typ = self.add_type.GetValue().strip()
     if local_conf.AddRadio(name, typ):
-      if Settings[0] != "Ask me":
-        Settings[0] = name
       self.NewRadioNames()
       local_conf.settings_changed = True
-  def OnBtnRename(self, event):
+      return True
+  def OnBtnCopy(self):
+    new_name = self.add_name2.GetValue().strip()
+    if not new_name or self.DuplicateName(new_name):
+      return
+    self.add_name2.SetValue('')
+    old_name = self.add_from.GetValue()
+    if local_conf.CopyRadio(old_name, new_name):
+      self.NewRadioNames()
+      local_conf.settings_changed = True
+      return True
+  def OnBtnRename(self):
     old = self.rename_old.GetValue()
     new = self.rename_new.GetValue().strip()
     if not old or not new or self.DuplicateName(new):
       return
     self.rename_new.SetValue('')
     if local_conf.RenameRadio(old, new):
-      if old == 'ConfigFileRadio' and Settings[1] == "ConfigFileRadio":
+      if Settings[1] == old:
         Settings[1] = new
-      elif Settings[1] == old:
-        Settings[1] = new
-      self.SetCurrentRadioText()
-      if Settings[0] != "Ask me":
-        Settings[0] = new
       self.NewRadioNames()
       local_conf.settings_changed = True
-  def OnBtnDelete(self, event):
+      return True
+  def OnBtnDelete(self):
     name = self.delete_name.GetValue()
     if not name:
       return
@@ -2713,6 +2830,7 @@ class Radios(BaseWindow):	# The "Radios" first-level page
     if ret == wx.ID_OK and local_conf.DeleteRadio(name):
       self.NewRadioNames()
       local_conf.settings_changed = True
+      return True
   def OnChoiceStartup(self, ctrl):
     choice = self.start_radio.GetValue()
     if Settings[0] != choice:
@@ -2722,11 +2840,11 @@ class Radios(BaseWindow):	# The "Radios" first-level page
     choices = Settings[2][:]			# can rename any available radio
     self.rename_old.SetItems(choices)
     self.rename_old.SetSelection(0)
-    if "ConfigFileRadio" in choices:
+    self.add_from.SetItems(choices)
+    self.add_from.SetSelection(0)
+    if "ConfigFileRadio" in choices:	# can not delete ConfigFileRadio
       choices.remove("ConfigFileRadio")
-    if Settings[1] in choices:
+    self.delete_name.SetItems(choices)
-      choices.remove(Settings[1])
-    self.delete_name.SetItems(choices)	# can not delete ConfigFileRadio nor the current radio
     self.delete_name.SetSelection(0)
     choices = Settings[2] + ["Ask me"]
     if "ConfigFileRadio" not in choices:
@@ -2735,13 +2853,13 @@ class Radios(BaseWindow):	# The "Radios" first-level page
     try:	# Set text in control
       index = choices.index(Settings[0])	# last used radio, or new or renamed radio
     except:
-      num = len(Settings[2])
+      num = len(Settings[2])	# number of radios
-      if len == 0:
+      if num == 0:		# no radios
-        index = 1
+        index = 1		# use ConfigFileRadio
-      elif num == 1:
+      elif num == 1:		# one radio
-        index = 0
+        index = 0		# use the one radio
       else:
-        index = len(choices) - 2
+        index = len(choices) - 2	# use the last radio
       Settings[0] = choices[index]
     self.start_radio.SetSelection(index)
 
@@ -2871,12 +2989,6 @@ class RadioSection(BaseWindow):		# The pages for each section in the second-leve
       hlp = "To delete a row, select it and press this button."
       self.AddTextButtonHelp(2, "Delete Midi row", "Delete", self.OnMidiDelete, hlp)
       self.NextRow()
-    if self.section == "Timing and CW":
-      if col != 1:
-        col = 1
-        self.NextRow()
-      self.NextRow()
-      self.AddTextL(1, 'Midi CW key moved to "Keys"', span=4)
     if not Keys:
       self.AddColSpacer(2, 20)
       self.AddColSpacer(5, 20)
@@ -3667,8 +3779,10 @@ class RadioSound(BaseWindow):		# The Sound page in the second-level notebook for
     self.NextRow()
     choices = (("48000", "96000", "192000"), ("0", "1"), ("0", "1"), (" ", "0", "1"))
     r = 0
-    if "SoftRock" in self.radio_dict['hardware_file_type']:		# Samples come from sound card
+    if "SoftRock" in self.radio_dict['hardware_file_type']:
-      softrock = True
+      softrock = True		# Samples come from sound card
+    elif hasattr(application.Hardware, "use_softrock"):
+      softrock = application.Hardware.use_softrock
     else:
       softrock = False
     last_row = 8

docs.html

@@ -194,7 +194,7 @@ Quisk is free open source software written in Python and C. It is hosted on the
 <br>
 <p>
 If you have Python 3 installed on your computer, just continue to use that version.
-<b>On Windows Quisk requires Python 3.8 or 3.9 or 3.10 or 3.11.</b>
+<b>On Windows Quisk requires Python 3.8, 3.9, 3.10, 3.11, 3.12 or 3.13.</b>
 If you want to install a more recent version of Python, uninstall the old version first.
 Running multiple versions of Python is possible but can be confusing and is not necessary.
 A Quisk installation is needed for each version of Python you have.
@@ -204,7 +204,7 @@ A Quisk installation is needed for each version of Python you have.
 <p>
 Windows does not include Python, so you must first install a recent version of 64-bit Python 3.
 If you already have 64-bit Python 3 installed, just keep using it.
-<b>On Windows Quisk requires Python 3.8 or 3.9 or 3.10 or 3.11.</b>
+<b>On Windows Quisk requires Python 3.8, 3.9, 3.10, 3.11, 3.12 or 3.13.</b>
 There may be newer versions of Python, but until support is added, use the versions listed above.
 Python is available from <a href="http://www.python.org/">http://www.python.org</a>.
 There is an option to <b>Add Python to PATH</b>. You MUST select
@@ -239,17 +239,24 @@ python -m pip install --upgrade pyserial
 <br><br>
 python -m pip install --upgrade quisk
 <br><br>
-You should then be able to start Quisk with the command "quisk".
-You can also start Quisk with "python -m quisk".
 To create a Quisk shortcut on your desktop, right-click an empty space and select "New" and "Shortcut".
-Use "quisk.exe" as the command and "Quisk" as the name.
+Enter this as the location of the item:
-The "quisk.exe" program is in <b>your_install_directory</b>\Scripts.
+</p>
+<br>
+<pre>
+pythonw -m quisk
+</pre>
+<br>
+<p>
+and then name the shortcut, perhaps "Quisk".
+If you check the properties you will see that Windows expanded the location and start directory to the full path.
 If you are curious, Quisk and its Python source files are installed in "<b>your_install_directory</b>\Lib\site-packages\quisk".
-If you change to that directory you can run Quisk with "python quisk.py".
+If you change to that directory you can run Quisk with "pythonw quisk.py".
 </p>
 <br>
 <p>
 To get started you must tell Quisk what kind of radio hardware you have. Press the Config button and select Radios.
+Add a radio from the list of hardware radios available. Or add the best match.
 Then set your sound devices for that radio; the device for the radio speakers, the microphone and so forth. All configuration
 is (mostly) from the Config button. Ignore old directions and don't bother with a config file.
 </p>
@@ -379,6 +386,7 @@ You run Quisk by running the file quisk.py with python3. For example, "python3 /
 You can create a desktop icon to do that, but the method depends on your version of Linux.
 <b>Never run Quisk with root privelege by using sudo. Fix the permission problem instead.</b>
 To get started you must tell Quisk what kind of radio hardware you have. Press the Config button and select Radios.
+Add a radio from the list of hardware radios available. Or add the best match.
 Then set your sound devices for that radio; the device for the radio speakers, the microphone and so forth. All configuration
 is (mostly) from the Config button. Ignore old directions and don't bother with a config file.
 To uninstall Quisk, just delete the quisk directory.
@@ -526,7 +534,7 @@ When you first install Quisk, you will not have any settings for your radio.
 Press the Config button and go to the Radios screen.
 Then create a radio by specifying the general hardware type and give it a name of your choosing.
 For a Hermes-Lite, specify "Hermes" as the hardware type and call it "HL2" (or some other name).
-Press "Add" and a new tab for your radio will appear. Look through the various settings on the HL2 tab.
+Press "Apply" and a new tab for your radio will appear. Look through the various settings on the HL2 tab.
 The parameters for the radios are stored in the file quisk_settings.json.
 <br>
 <br>
@@ -824,8 +832,14 @@ SoftRock radios use an analog mixer to change the RF signal to stereo audio, and
 A high quality sound card is advisable. The analog mixer is not perfect, and it will be necessary to adjust the I and Q
 signals to equal amplitude and 90 degrees phase difference. Use the Config/Config screen buttons to
 bring up an adjustment screen. Adjustments must be made for each band, and separately for transmit and receive.
-The adjustment depends on both the VFO frequency and the tuning offset from the VFO. See my paper 
+The adjustment depends on both the VFO frequency and the tuning offset from the VFO.
+Quisk has an option to fix the tuning offset to a constant and to tune with the hardware.
+The tuning offset then has a constant correction and it is only necessary to correct for the VFO,
+a much less sensitive correction.
+See my paper 
 <a href="http://james.ahlstrom.name/phase_corr.html">http://james.ahlstrom.name/phase_corr.html</a> for more information.
+<br>
+<br>
 A good strategy is to pick a VFO near the band center, and record corrections at an Rx frequency of -15000, -1000, 1000 and 15000 Hertz.
 If the corrections are sensitive to VFO, record the corrections for these same Rx frequencies at VFOs equal to
 or slightly outside the upper and lower band edges.
@@ -834,6 +848,10 @@ You can add as many correction points as desired. The corrections are saved in t
 by hand if you are a Python expert. Otherwise you can just read the values.
 <br>
 <br>
+If you fix the tuning offset to a constant, you can create a correction for VFO at the band center, or
+the center and both edges.
+<br>
+<br>
 To create a Receive correction point for a given VFO and frequency, attach a signal generator to the SoftRock through an attenuator,
 and look at the image on the graph screen. If the signal is 3500 Hertz above the VFO, the image is 3500 Hertz below it.
 Choose "Measure" to measure the corrections and then "Add Cell".
@@ -1469,21 +1487,32 @@ show the devices being used. Change the Fldigi playback to QuiskDigitalInput, an
 Monitor of QuiskDigitalOutput.  Then everything should work.  You do not need to use pavucontrol again because PulseAudio will
 remember the settings.
 <br>
-
+<br>
+Michael, DK1MI/N1BSD, has written a nice description of how to set up Fldigi. It is available
+at his site <a href="https://dk1mi.radio/quisk-fldigi/">https://dk1mi.radio/quisk-fldigi/</a>.
+<br>
 <br>
 If your digital program only uses Alsa devices or you don't want to use PulseAudio,
 you can use the ALSA loopback device.
 It works the same way as the Windows VAC. First create the loopback device with this command:
+<br>
+<br>
 <pre>
 sudo modprobe snd-aloop index=19
 </pre>
+<br>
+<p>
 The "index" is the card number, and it is best to use a number higher than your regular cards.
 The loopback device will be gone on the next restart.
 You can create the loopback device every time the system starts, but the way to do that depends on your version of Linux.
 You could add this line to /etc/modprobe.d/alsa-base.conf:
+</p>
+<br>
 <pre>
 options snd-aloop index=19
 </pre>
+<br>
+<p>
 Or you could add snd-aloop to /etc/modules or put the modprobe command in /etc/rc.local instead.
 Restart Linux. Now you can enter "cat /proc/asound/cards" to
 print out your sound cards, and you should see a "Loopback" card listed.
@@ -1498,6 +1527,7 @@ Your audio is now connected and you
 should be able to receive digital signals. Be sure to test your
 transmit signal off the air. You may need to reduce power to
 improve linearity.
+</p>
 <br>
 
 <br>

dxcluster.py

@@ -1,9 +1,9 @@
-from __future__ import absolute_import
 # This code was contributed by Christof, DJ4CM.  Many Thanks!!
+# Modified November 2024 by N2ADR to remove deprecated telnetlib module.
 
 import threading
+import socket
 import time
-import telnetlib
 import quisk_conf_defaults as conf
 
 class DxEntry:
@@ -81,61 +81,109 @@ class DxEntry:
   
 class DxCluster(threading.Thread):
   def __init__(self):
-    self.do_init = 1
+    self.error = 'Starting'
+    self.dxSpots = []
     threading.Thread.__init__(self)
     self.doQuit = threading.Event()
-    self.dxSpots = []
     self.doQuit.clear()
+    self.dxLock = threading.Lock()
+    self.addr = conf.dxClHost + ':' + str(conf.dxClPort)
+    self.msg_no_spots = "No DX Cluster data from " + self.addr
+    self.msg_one_spot = '1 DX spot received from ' + self.addr
+    self.msg_spots =    ' DX spots received from ' + self.addr
     
   def run(self):
-    self.telnetInit()
     self.telnetConnect()
+    if self.error:
+      self.sock.close()
+      return
     while not self.doQuit.isSet():
       try:
-          self.telnetRead()
+        by = self.sock.recv(1024)
+      except TimeoutError:
+        continue
       except:
-        self.tn.close()
+        by = b''
-        time.sleep(20)
+      if by:
+        with self.dxLock:
+          self.bytes += by
+      else:
+        self.sock.close()
+        self.error = "Restarting " + self.addr
+        time.sleep(2)
         if not self.doQuit.isSet():
           self.telnetConnect()
-    self.tn.close()
+          if self.error:
-      
+            self.sock.close()
-  def setListener (self, listener):  
+            return
-    self.listener = listener
+    self.sock.close()
-        
-  def telnetInit(self):
-    self.tn = telnetlib.Telnet()
         
   def telnetConnect(self):    
+    self.bytes = bytearray(0)
+    self.error = 'Starting'
+    self.sock = socket.socket()
+    self.sock.settimeout(20)
+    try:
+      self.sock.connect( (conf.dxClHost, conf.dxClPort) )
+    except:
+      self.error = "Failed to connect to " + self.addr
+      return
+    self.sock.settimeout(1)
     for i in range(10):
       try:
-        self.tn.open(conf.dxClHost, conf.dxClPort, 10)
+        self.bytes += self.sock.recv(1024)
-        self.tn.read_until(b"login:", 10)
-        self.tn.write(conf.user_call_sign.encode('utf-8', errors='ignore') + b"\n")		# user_call_sign may be Unicode
-        break
       except:
-        time.sleep(0.5)
+        pass
+      if b"login:" in self.bytes:
+        break
+    else:
+      self.error = 'No "login:" prompt from ' + self.addr
+      return
+    self.sock.sendall(conf.user_call_sign.encode('utf-8', errors='ignore') + b"\r\n")
     if conf.dxClPassword:
-      self.tn.read_until(b"Password: ")
+      for i in range(10):
-      self.tn.write(conf.dxClPassword.encode('utf-8', errors='ignore') + b"\n")
+        try:
+          self.bytes += self.sock.recv(1024)
+        except:
+          pass
+        if b"Password:" in self.bytes:
+          break
+      else:
+        self.error = 'No "Password:" prompt from ' + self.addr
+        return
+      self.sock.sendall(conf.dxClPassword.encode('utf-8', errors='ignore') + b"\r\n")
+    self.error = ''
+    self.bytes = bytearray(0)
 
-  def telnetRead(self):
+  def Poll(self):
-    message = self.tn.read_until(b'\n', 60).decode(encoding='utf-8', errors='replace')
+    with self.dxLock:
-    if self.doQuit.isSet() == False:
+      index = self.bytes.find(b"\n")
-      dxEntry = DxEntry();
+      if index >= 0:
+        message = self.bytes[0:index + 1]
+        self.bytes = self.bytes[index + 1:]
+      else:
+        return
+    message = message.decode(encoding='utf-8', errors='replace')
+    dxEntry = DxEntry()
     if dxEntry.parseMessage(message):
       for i, listElement in enumerate(self.dxSpots):
         if (listElement.equal(dxEntry)):
           listElement.join (dxEntry)
-            return
+          return True
         if listElement.isExpired():
           del (self.dxSpots[i])
       self.dxSpots.append(dxEntry)
-        if self.listener:
+      return True
-          self.listener()
-        
-  def getHost(self):
-    return self.tn.host + ':' + str(self.tn.port)
         
   def stop(self):
     self.doQuit.set()
+
+  def dxStatus(self):
+    if self.error:
+      return self.error
+    nSpots = len(self.dxSpots)
+    if nSpots == 0:
+      return self.msg_no_spots
+    elif nSpots == 1:
+      return self.msg_one_spot
+    return str(nSpots) + self.msg_spots

hiqsdr/quisk_hardware.py

@@ -402,6 +402,8 @@ class Hardware(BaseHardware):
     if do_tx:
       try:
         self.rx_udp_socket.send(s)
+        if DEBUG:
+          self.PrintStatus(' Send', self.want_udp_status)
       except:
         pass
   def SetVNA(self, key_down=None, vna_start=None, vna_stop=None, vna_count=None, do_tx=False):

multuspkg/__init__.py

@@ -0,0 +1 @@
+#

multuspkg/quisk_hardware.py

@@ -0,0 +1,209 @@
+# This file is part of the Multus project. See https://www.multus-sdr.com/.
+# It controls what items appear on the Hardware configuration screen and
+# provides logic for each radio.
+
+
+################ Receivers Multus CW, A transceiver from the Multus project.
+## hardware_file_name		Hardware file path, rfile
+# This is the file that contains the control logic for each radio.
+#hardware_file_name = "multuspkg/quisk_hardware.py"
+
+## widgets_file_name			Widget file path, rfile
+# This optional file adds additional controls for the radio.
+#widgets_file_name = ""
+
+## rx_max_amplitude_correct		Max ampl correct, number
+# If you get your I/Q samples from a sound card, you will need to correct the
+# amplitude and phase for inaccuracies in the analog hardware.  The correction is
+# entered using the controls from the "Rx Phase" button on the config screen.
+# You must enter a positive number.  This controls the range of the control.
+#rx_max_amplitude_correct = 0.2
+
+## rx_max_phase_correct			Max phase correct, number
+# If you get your I/Q samples from a sound card, you will need to correct the
+# amplitude and phase for inaccuracies in the analog hardware.  The correction is
+# entered using the controls from the "Rx Phase" button on the config screen.
+# You must enter a positive number.  This controls the range of the control in degrees.
+#rx_max_phase_correct = 10.0
+
+## tx_level		Tx Level, dict
+# This is the level of the Tx audio sent to SoftRock hardware after all processing as a percentage
+# number from 0 to 100.
+# The level should be below 100 to allow headroom for amplitude and phase adjustments.
+# Changes are immediate (no need to restart).
+#tx_level = {}
+
+## digital_tx_level			Digital Tx power %, integer
+# Digital modes reduce power by the percentage on the config screen.
+# This is the maximum value of the slider.
+#digital_tx_level = 100
+
+## keyer_speed		Keyer speed WPM, integer
+#  This sets the keyer speed in words per minute.
+#keyer_speed = 8
+#keyer_speed = 13
+#keyer_speed = 18
+#keyer_speed = 20
+#keyer_speed = 30
+#keyer_speed = 40
+
+## keyer_type 		Type of keyer, text choice
+# Use "Straight" mode for a straight key or a bug. Connect the tip of the key to the transceiver.
+# Otherwise, select Iambic-A or Iambic-B mode of operation.
+#keyer_type = "Straight"
+#keyer_type = "Iambic-A"
+#keyer_type = "Iambic-B"
+
+## keyer_space		Keyer space, text choice
+# This sets the type of spacing between elements or letters.
+# "Element" attempts to provide proper spacing between the elements of a character.
+# (The keyer always provides proper spacing between elements).
+# "Letter" turns on letter spacing.  This attempts to provide proper spacing between characters.
+#keyer_space = "Element"
+#keyer_space = "Letter"
+
+## keyer_weight		Keyer weight, integer choice
+# A weight of 50% means that the dit time equals the inter-element time, which is standard.
+# Reducing the weight increases the inter-element time, increasing the weight reduces it.
+#keyer_weight = 50
+#keyer_weight = 25
+#keyer_weight = 75
+
+## keyer_paddle		Keyer paddle, text choice
+# "Normal" means the left paddle is DIT. "Reverse" means the left paddle is DAH.
+#keyer_paddle = "Normal"
+#keyer_paddle = "Reverse"
+
+import configure
+import softrock
+from softrock.hardware_usb import Hardware as BaseHardware
+from softrock.hardware_usb import IN, OUT, UBYTE2, UBYTE4
+import _quisk as QS
+
+DEBUG = 0
+
+class Hardware(BaseHardware):
+  def __init__(self, app, conf):
+    # Set constant parameters here:
+    conf.usb_vendor_id = 0x16c0
+    conf.usb_product_id = 0x05dc
+    conf.si570_i2c_address = 0x55
+    conf.si570_direct_control = False
+    conf.si570_xtal_freq = 114285000
+    conf.repeater_delay = 0.25
+    self.ptt_count = 200 
+    self.ptt_on = 0
+    BaseHardware.__init__(self, app, conf)
+    QS.set_sparams(multus_cw_samples=1)
+    self.use_softrock = True
+    if DEBUG:
+      print ("The name of this radio is", configure.Settings[1])
+      print ("The hardware file type is", conf.hardware_file_type)
+  def TransferOut(self, address, message):	# message is a bytes array or an integer 0 to 255
+    if isinstance(message, int):
+      message = message.to_bytes(1, 'big')
+    if self.usb_dev:
+      self.usb_dev.ctrl_transfer(OUT, address, self.si570_i2c_address + 0x700, 0, message)
+    if DEBUG:
+      print ("USB send to 0x%X" % address, message)
+  def TransferIn(self, address, length):
+    if self.usb_dev:
+      recv = self.usb_dev.ctrl_transfer(IN, address, self.si570_i2c_address + 0x700, 0, length)
+      if DEBUG:
+        print ("USB receive from 0x%X" % address, recv)
+      return recv
+    return None
+  def open(self):
+    text = BaseHardware.open(self)
+    self.InitKeyer()
+    return text
+  def ChangeMode(self, mode):
+    ret = BaseHardware.ChangeMode(self, mode)
+    if mode in ("CWL", "CWU"):
+      cw_mode = b'C'	# Adding "b" does not affect the value sent
+      if DEBUG:
+        print ("Mode is CW")
+    else:
+      cw_mode = b'U'
+      if DEBUG:
+        print ("Mode is not CW")
+    self.TransferOut(0x70, cw_mode)
+    return ret
+  def PollCwKey(self):  # Called frequently from the sound thread to check the CW key status
+    return	# Quisk is always in Rx
+  def PollGuiControl(self):	# Called frequently from the GUI thread
+    self.ptt_count -= 1
+    if self.ptt_count <= 0:
+      self.ptt_count = 200 
+      reply = self.TransferIn(0xA5, 1)
+      if DEBUG:
+        print ("PollGuiControl got", reply)
+      if reply:
+        ptt = reply[0]	# This is 255 for error
+        if ptt in (0, 1) and ptt != self.ptt_on:
+          self.ptt_on = ptt
+          self.application.pttButton.SetValue(ptt, True)
+  def InitKeyer(self):
+    # Initialize the keyer parameters
+    conf = self.conf
+    if not hasattr(conf, "keyer_speed"):
+      conf.keyer_speed = 18
+    if not hasattr(conf, "keyer_type"):
+      conf.keyer_type = "Straight"
+    if not hasattr(conf, "keyer_space"):
+      conf.keyer_space = "Element"
+    if not hasattr(conf, "keyer_weight"):
+      conf.keyer_weight = 50
+    if not hasattr(conf, "keyer_paddle"):
+      conf.keyer_paddle = "Normal"
+    # We need to initialize in case the persistent hardware values differ from the Quisk values.
+    for name in ("keyer_speed", "keyer_type", "keyer_space", "keyer_weight", "keyer_paddle", "cwTone"):
+      self.ImmediateChange(name)
+  def ImmediateChange(self, name):
+    BaseHardware.ImmediateChange(self, name)
+    value = getattr(self.conf, name)
+    if DEBUG:
+      print ("ImmediateChange", name, value)
+    if name == "keyer_speed":
+      self.TransferOut(0x7B, value)
+    elif name == "keyer_type":
+      if value == "Straight":
+        mode = 0
+      elif value == "Iambic-A":
+        mode = 1
+      elif value == "Iambic-B":
+        mode = 2
+      else:
+        mode = 0
+      self.TransferOut(0x71, mode)
+    elif name == "keyer_space":
+      if value == "Element":
+        spacing = 0
+      elif value == "Letter":
+        spacing = 1
+      else:
+        spacing = 0
+      self.TransferOut(0x75, spacing)
+    elif name == "keyer_weight": 
+      weight = int(value)
+      self.TransferOut(0x77, weight)
+    elif name == "keyer_paddle":
+      if value == "Normal":
+        paddle = 0
+      elif value == "Reverse":
+        paddle = 1
+      else:
+        paddle = 0
+      self.TransferOut(0x73, paddle)
+    elif name == "cwTone":
+      if value < 500:
+        tone_index = 0	# 400 Hz
+      elif 500 <= value < 700:
+        tone_index = 1	# 600 Hz
+      elif 700 <= value < 900:
+        tone_index = 2	# 800 Hz
+      else:
+        tone_index = 3	# 1000 Hz
+      self.TransferOut(0x7F, tone_index)
+      
+	  

quisk.c

@@ -1976,7 +1976,7 @@ static int quisk_process_demodulate(complex double * cSamples, double * dsamples
 			ssb_squelch(dsamples, nSamples, quisk_filter_srate, MeasureSquelch + bank);
 			d_delay(dsamples, nSamples, bank, SQUELCH_FFT_SIZE);
 		}
-		quisk_calc_audio_graph(pow(2, 31) - 1, NULL, dsamples, nSamples, 1);
+		//quisk_calc_audio_graph(pow(2, 31) - 1, NULL, dsamples, nSamples, 1);
 		nSamples = quisk_dInterpolate(dsamples, nSamples, &Storage[bank].filtAudio24p4, 2);
 		nSamples = quisk_dInterp2HB45(dsamples, nSamples, &Storage[bank].HalfBand7);
 		//quisk_calc_audio_graph(pow(2, 31) - 1, NULL, dsamples, nSamples, 1);
@@ -5060,6 +5060,62 @@ static PyObject * get_bandscope(PyObject * self, PyObject * args)	// Called by t
 	return Py_None;
 }
 
+#if 0
+static void check_channel_delay(fft_data * ptFft)
+{
+	int i, maxi, freq;
+	static int count=0, freq0;
+	static double gain=0, phase=0;
+	double d, ampl, maxa;
+	static double complex * samples1=NULL, * samples2;
+
+	if (samples1 == NULL) {
+		samples1 = (double complex *)malloc(fft_size * sizeof(double complex));
+		samples2 = (double complex *)malloc(fft_size * sizeof(double complex));
+	}
+	for (i = 0; i < fft_size; i++) {
+		samples1[i] = creal(ptFft->samples[i]);
+		samples2[i] = cimag(ptFft->samples[i]);
+	}
+	fftw_execute_dft(quisk_fft_plan, samples1, samples1);
+	fftw_execute_dft(quisk_fft_plan, samples2, samples2);
+	maxa = 0;
+	maxi = 0;
+	for (i = 0; i < fft_size / 2; i++) {
+		ampl = cabs(samples1[i]);
+		if (ampl > maxa) {
+			maxa = ampl;
+			maxi = i;
+		}
+	}
+	freq = maxi * fft_sample_rate / fft_size;
+	//freq = maxi * 44100 / fft_size;
+	gain += cabs(samples1[maxi]) / cabs(samples2[maxi]);
+	d = carg(samples1[maxi]) - carg(samples2[maxi]);
+	if (d > M_PI)
+		d -= M_PI * 2;
+	else if(d < - M_PI)
+		d += M_PI * 2;
+	phase += d;
+	count += 1;
+	if (count == 1) {
+		freq0 = freq;
+	}
+	else if (freq != freq0) {
+		gain = phase = count = 0;
+		return;
+	}
+	if (count > 10) {
+		gain /= count;
+		phase /= count;
+		//printf("Channel delay freq %6d, gain %6.3lf, phase %8.5lf radians, %6.3lf degrees\n",
+		//	freq, gain, phase, phase * 57.29578);
+		printf("%6d, %6.3lf, %6.3lf\n", freq, gain, phase * 57.29578);
+		gain = phase = count = 0;
+	}
+}
+#endif
+
 static void softrock_correct_fft(fft_data * ptFft, int fixit)
 { // See i/Q balance in Rocky: https://www.dxatlas.com/Rocky/Advanced.asp
 	double ampl, r1, r2, i1, i2, Zr, Zi, Pwr, Gain, Phase, OutR, OutI, S1R, S1I, S2R, S2I;
@@ -5205,6 +5261,7 @@ static PyObject * get_graph(PyObject * self, PyObject * args)	// Called by the G
 		// Continue with FFT calculation
 		for (i = 0; i < fft_size; i++)		// multiply by window
 			ptFft->samples[i] *= fft_window[i];
+		//check_channel_delay(ptFft);
 		fftw_execute_dft(quisk_fft_plan, ptFft->samples, ptFft->samples);	// Calculate FFT
 		if (softrock_correct_active == 2)
 			softrock_correct_fft(ptFft, 0);

quisk.py

@@ -334,6 +334,7 @@ class HamlibHandlerSerial:
     self.public_name = public_name	# the public name for the serial port
     self.tune_step = 1000
     if sys.platform == 'win32' or public_name.startswith("/dev/"):
+      self.port_is_mod_serial = True	# self.port is from the serial module
       try:
         import serial
       except:
@@ -346,6 +347,7 @@ class HamlibHandlerSerial:
           print ("The serial port %s could not be opened." % public_name)
     else:
       import tty
+      self.port_is_mod_serial = False	# self.port is a file descriptor
       if os.path.lexists(public_name):
         try:
           os.remove(public_name)
@@ -369,7 +371,7 @@ class HamlibHandlerSerial:
   def open(self):
     return
   def close(self):
-    if sys.platform == 'win32':
+    if self.port_is_mod_serial:
       if self.port:
         self.port.close()
       self.port = None
@@ -382,7 +384,7 @@ class HamlibHandlerSerial:
   def Read(self):
     if self.port is None:
       return
-    if sys.platform == 'win32':
+    if self.port_is_mod_serial:
       text = self.port.read(99)
       if not isinstance(text, Q3StringTypes):
         text = text.decode('utf-8')
@@ -433,22 +435,14 @@ class HamlibHandlerSerial:
       return
     if isinstance(data, Q3StringTypes):
       data = data.encode('utf-8', errors='ignore')
-    if sys.platform == 'win32':
+    if self.port_is_mod_serial:
       self.port.write(data)
     else:
       r, w, x = select.select((), (self.port,), (), 0)
       if w:
         os.write(self.port, data)
-  def set_frequency(self, freq):
+  def set_frequency(self, freq):	# This changes the Rx frequency
-    tune = freq - self.app.VFO
+    self.app.ChangeRxTxFrequency(freq, None)
-    d = self.app.sample_rate * 45 // 100
-    if -d <= tune <= d:  # Frequency is on-screen
-      vfo = self.app.VFO
-    else:  # Change the VFO
-      vfo = (freq // 5000) * 5000 - 5000
-      tune = freq - vfo
-    self.app.BandFromFreq(freq)
-    self.app.ChangeHwFrequency(tune, vfo, 'FreqEntry')
     if HAMLIB_DEBUG: print("New Freq rx,tx", self.app.txFreq + self.app.VFO, self.app.rxFreq + self.app.VFO)
   def ZZAC(self, cmd, data, length):  # Set or read tune steps
     if length == 0:
@@ -836,6 +830,8 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
     """Send text back to the client."""
     if isinstance(text, Q3StringTypes):
       text = text.encode('utf-8', errors='ignore')
+    if HAMLIB_DEBUG:
+      print ("Rig2 send", text)
     try:
       self.sock.sendall(text)
     except socket.error:
@@ -942,6 +938,8 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
     else:
       return 1
     self.input = self.input.strip()		# Here is our command line
+    if HAMLIB_DEBUG:
+      print ("Rig2 received", self.input)
     while self.input:
       # Parse the commands and call the appropriate handlers
       self.params = ''
@@ -992,8 +990,12 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
     if rx:
       rx = rx[0]
       self.Reply('Frequency', rx.txFreq + rx.VFO, 0)
+      if HAMLIB_DEBUG:
+        print ("GetFreq rx", rx.txFreq, rx.VFO)
     else:
       self.Reply('Frequency', self.app.rxFreq + self.app.VFO, 0)
+      if HAMLIB_DEBUG:
+        print ("GetFreq app", self.app.rxFreq, self.app.txFreq, self.app.VFO)
   def SetFreq(self):	# The Rx frequency
     freq = self.GetParamNumber()
     try:
@@ -1432,12 +1434,8 @@ class ConfigStatus(wx.ScrolledCanvas):
     self.MakeRow2("Sample interrupts", self.interrupts, cfile)
     self.MakeRow2("Microphone or DGT level dB", level, qfile)
     self.MakeRow2("FFT number of points", self.fft_size, err_msg)
-    if conf.dxClHost:		# connection to dx cluster
+    if application.dxCluster:
-      nSpots = len(application.dxCluster.dxSpots)
+      msg = application.dxCluster.dxStatus()
-      if nSpots > 0:
-        msg = str(nSpots) + ' DX spot' + ('' if nSpots==1 else 's') + ' received from ' + application.dxCluster.getHost()
-      else:
-        msg = "No DX Cluster data from %s" % conf.dxClHost
       self.MakeRow2("FFT number of errors", self.fft_error, msg)
     else:
       self.MakeRow2("FFT number of errors", self.fft_error)
@@ -2121,7 +2119,7 @@ class GraphScreen(wx.Window):
     """For mouse clicks in our display, translate to our screen coordinates."""
     mouse_x, mouse_y = event.GetPosition()
     win = event.GetEventObject()
-    if win is not self:
+    if win and win is not self:
       x, y = win.GetPosition().Get()
       mouse_x += x
       mouse_y += y
@@ -2218,6 +2216,7 @@ class GraphScreen(wx.Window):
         self.ChangeHwFrequency(self.txFreq, self.VFO, 'MouseBtn1', event=event, rx_freq=freq)
       else:
         self.ChangeHwFrequency(freq, self.VFO, 'MouseBtn1', event=event)
+    if not self.HasCapture():
       self.CaptureMouse()
   def OnLeftUp(self, event):
     if self.HasCapture():
@@ -2231,7 +2230,7 @@ class GraphScreen(wx.Window):
       mouse_x, mouse_y = self.GetMousePosition(event)
       if wx.GetKeyState(wx.WXK_SHIFT):
         mouse_x -= self.filter_center * self.data_width / sample_rate
-      if conf.mouse_tune_method:		# Mouse motion changes the VFO frequency
+      if False: #conf.mouse_tune_method:		# Mouse motion changes the VFO frequency
         x = (mouse_x - self.mouse_x)	# Thanks to VK6JBL
         self.mouse_x = mouse_x
         freq = float(x) * sample_rate / self.data_width
@@ -2537,12 +2536,10 @@ class WaterfallDisplay(wx.Window):
     self.top_key = 8
     self.top_size = (self.top_key + 2) * (self.top_key - 1) // 2
     # Make the palette
-    if conf.waterfall_palette == 'B':
+    if conf.waterfall_palette == 'A':
-      pal2 = conf.waterfallPaletteB
-    elif conf.waterfall_palette == 'C':
-      pal2 = conf.waterfallPaletteC
-    else:
       pal2 = conf.waterfallPalette
+    else:
+      pal2 = getattr(conf, "waterfallPalette" + conf.waterfall_palette)
     red = bytearray(256)
     green = bytearray(256)
     blue = bytearray(256)
@@ -2636,7 +2633,7 @@ class WaterfallScreen(wx.SplitterWindow):
     self.y_zero = conf.waterfall_y_zero
     self.zoom_control = 0
     wx.SplitterWindow.__init__(self, frame)
-    self.SetSizeHints(width, -1, width)
+    self.SetSizeHints(width, -1)
     self.SetSashGravity(0.50)
     self.SetMinimumPaneSize(1)
     self.SetSize((width, conf.waterfall_graph_size + 100))	# be able to set sash size
@@ -2990,7 +2987,7 @@ class MultiReceiverScreen(wx.SplitterWindow):
     self.rx_zero = self.graph
     self.Initialize(self.rx_zero)
     self.waterfall.Hide()
-    self.SetSizeHints(self.width, -1, self.width)
+    self.SetSizeHints(self.width, -1)
     # Calculate control width
     rx_btn = QuiskPushbutton(self, None, "Rx 8....", style=wx.BU_EXACTFIT)
     self.rx_btn_width, self.rx_btn_height = rx_btn.GetSize().Get()
@@ -3523,6 +3520,7 @@ class App(wx.App):
     if not os.path.isdir(self.QuiskFilesDir):
       self.QuiskFilesDir = DefaultConfigDir
     self.std_out_err = StdOutput(self)
+    self.std_out_err.Logfile("WxPython " + wx.version())
     QS.set_params(quisk_is_vna=0)	# We are not the VNA program
     # Read in configuration from the selected radio
     self.BandPlan = []
@@ -3613,6 +3611,7 @@ class App(wx.App):
         setattr(conf, 'widgets_file_name',  '')
     Hardware = self.Hardware
     self.use_fast_heart_beat = hasattr(Hardware, "FastHeartBeat")
+    self.poll_gui_control = hasattr(Hardware, "PollGuiControl")
     # Initialization - may be over-written by persistent state
     self.local_conf.Initialize()
     self.clip_time0 = 0		# timer to display a CLIP message on ADC overflow
@@ -3823,16 +3822,16 @@ class App(wx.App):
       self.std_out_err.Show(False)
     else:
       self.std_out_err.Show(True)
-    #w, h = frame.GetSize().Get()
+    wClient, hClient = self.main_frame.GetClientSize()
-    #ww, hh = frame.GetClientSizeTuple()
+    wFrame, hFrame = self.main_frame.GetSize()
-    #print ('Main frame: size', w, h, 'client', ww, hh)
+    main_border_w = wFrame - wClient
+    #print ('Main frame: size', wFrame, hFrame, 'client', wClient, hClient, 'border', main_border_w)
     # Find the data width from a list of preferred sizes; it is the width of returned graph data.
     # The graph_width is the width of data_width that is displayed.
+    # The total width of the graph is graph_width + self.graph_borders
     if conf.window_width > 0:
-      #wFrame, h = frame.GetClientSize().Get()				# client window width
-      wFrame = conf.window_width - 15	# Thanks to Nick Abramenko, RA3PKJ 
       graph = GraphScreen(frame, self.width//2, self.width//2, None)	# make a GraphScreen to calculate borders
-      self.graph_width = wFrame - (graph.width - graph.graph_width)		# less graph borders equals actual graph_width
+      self.graph_width = wClient - (graph.width - graph.graph_width)		# less graph borders equals actual graph_width
       graph.Destroy()
       del graph
       if self.graph_width % 2 == 1:		# Both data_width and graph_width are even numbers
@@ -3957,14 +3956,14 @@ class App(wx.App):
     frame.SetSizer(vertBox)
     # Add the screens
     vertBox.Add(self.config_screen, 1, wx.EXPAND)
-    vertBox.Add(self.multi_rx_screen, 1)
+    vertBox.Add(self.multi_rx_screen, 1, wx.EXPAND)
-    vertBox.Add(self.scope, 1)
+    vertBox.Add(self.scope, 1, wx.EXPAND)
-    vertBox.Add(self.bandscope_screen, 1)
+    vertBox.Add(self.bandscope_screen, 1, wx.EXPAND)
-    vertBox.Add(self.filter_screen, 1)
+    vertBox.Add(self.filter_screen, 1, wx.EXPAND)
     if self.rate_audio_fft:
-      vertBox.Add(self.audio_fft_screen, 1)
+      vertBox.Add(self.audio_fft_screen, 1, wx.EXPAND)
-    vertBox.Add(self.help_screen, 1)
+    vertBox.Add(self.help_screen, 1, wx.EXPAND)
-    vertBox.Add(self.station_screen)
+    vertBox.Add(self.station_screen, 0, wx.EXPAND)
     # Add the spacer
     vertBox.Add(Spacer(frame), 0, wx.EXPAND)
     # Add the sizer for the controls
@@ -3977,13 +3976,16 @@ class App(wx.App):
     vertBox.AddSpacer(5)		# Thanks to Christof, DJ4CM
     # End of vertical box.
     self.MakeButtons(frame, gbs)
-    minw = width = self.graph.width
-    maxw = maxh = -1
-    minh = 100
     if conf.window_width > 0:
-      minw = width = maxw = conf.window_width
+      minw = maxw = conf.window_width
+    else:
+      minw = self.graph.width + main_border_w
+      maxw = -1
     if conf.window_height > 0:
       minh = maxh = self.height = conf.window_height
+    else:
+      minh = 100
+      maxh = -1
     self.main_frame.SetSizeHints(minw, minh, maxw, maxh)
     self.main_frame.SetClientSize(wx.Size(width, self.height))
     if hasattr(Hardware, 'pre_open'):       # pre_open() is called before open()
@@ -4025,7 +4027,6 @@ class App(wx.App):
     if conf.dxClHost:
       # create DX Cluster and register listener for change notification
       self.dxCluster = dxcluster.DxCluster()
-      self.dxCluster.setListener(self.OnDxClChange)
       self.dxCluster.start()
     # Create shortcut keys for buttons
     if conf.button_layout == 'Large screen':
@@ -4376,8 +4377,6 @@ class App(wx.App):
                 conf.tx_ip, conf.tx_audio_port,
                 conf.mic_sample_rate, conf.mic_channel_I, conf.mic_channel_Q,
 				0.7, conf.mic_playback_rate)
-  def OnDxClChange(self):
-    self.station_screen.Refresh()
   def OnIdle(self, event):
     if self.screen:
       self.screen.OnIdle(event)
@@ -4708,7 +4707,7 @@ class App(wx.App):
     b.char_shortcut = 'l'
     self.MakeAccel(b)
     self.splitButton = WrapMenu(b, self.split_menu)
-    if conf.mouse_tune_method:		# Mouse motion changes the VFO frequency
+    if False: #conf.mouse_tune_method:		# Mouse motion changes the VFO frequency
       self.splitButton.Enable(False)
     left_row3.append(self.splitButton)
     b = QuiskCheckbutton(frame, self.OnBtnFDX, 'FDX', color=conf.color_test)
@@ -4918,7 +4917,8 @@ class App(wx.App):
     self.freqDisplay.Display(self.txFreq + self.VFO)
     # On/Off button
     if conf.button_layout == 'Large screen':
-      b_onoff = QuiskCheckbutton(frame, self.OnBtnOnOff, "On", color='#77DD77')
+      b_onoff = QuiskCheckbutton(frame, self.OnBtnOnOff, "On", color=conf.color_onoff)
+      b_onoff.text_color = conf.color_onoff_text
       b_onoff.SetValue(True, do_cmd=False)
       h = b_freqdisp.height
       b_onoff.SetSizeHints(h, h, h, h)
@@ -5874,16 +5874,31 @@ class App(wx.App):
     The hardware will reply with the updated frequencies which may be different
     from those requested; use and display the returned tune and vfo.
     """
+    #print ("ChangeHW", source, tune, vfo, vfo + tune)
     if not self.split_rxtx:
       self.rxFreq = tune	# rxFreq must be correct before the call to Hardware.ChangeFrequency()
     elif rx_freq is not None:
       self.rxFreq = rx_freq
+    rx_offset = self.rxFreq - tune
     if self.screen == self.bandscope_screen:
       freq = vfo + tune
       tune = freq % 10000
       vfo = freq - tune
       tune, vfo = Hardware.ChangeFrequency(vfo + tune, vfo, source, band, event)
       self.ChangeDisplayFrequency(tune - vfo, vfo, rx_freq is not None)
+    elif conf.fixed_tune_offset:
+      # Tune with the VFO and keep a constant audio offset from the center. Tx tune is always conf.fixed_tune_offset.
+      tune_freq = vfo + tune
+      self.rxFreq = conf.fixed_tune_offset + rx_offset
+      if source == "BtnUpDown":
+        tune_freq = vfo + conf.fixed_tune_offset
+      else:
+        vfo = tune_freq - conf.fixed_tune_offset
+      tune_freq, vfo = Hardware.ChangeFrequency(tune_freq, vfo, source, band, event)
+      self.ChangeDisplayFrequency(tune_freq - vfo, vfo, True)
+    else:
+      tune, vfo = Hardware.ChangeFrequency(vfo + tune, vfo, source, band, event)
+      self.ChangeDisplayFrequency(tune - vfo, vfo, rx_freq is not None)
   def ChangeDisplayFrequency(self, tune, vfo, new_rxfreq=False):
     'Change the frequency displayed by Quisk'
     change = 0
@@ -6380,7 +6395,7 @@ class App(wx.App):
       for client in self.hamlib_clients:	# Service existing clients
         if not client.Process():		# False return indicates a closed connection; remove the handler for this client
           self.hamlib_clients.remove(client)
-          # print 'Remove', client.address
+          # print ('Remove', client.address)
           break
   def OnKeyHook(self, event):
     event.Skip()
@@ -6436,6 +6451,8 @@ class App(wx.App):
       self.hamlib_com2_handler.Process()
     if self.use_fast_heart_beat:
       Hardware.FastHeartBeat()
+    if self.poll_gui_control:
+      Hardware.PollGuiControl()
     if conf.do_repeater_offset:
       hold = QS.tx_hold_state(-1)
       if hold == 2:	# Tx is being held for an FM repeater TX frequency shift
@@ -6616,6 +6633,9 @@ class App(wx.App):
           self.ChangeDisplayFrequency(tune - vfo, vfo)
         self.FldigiPoll()
         self.HamlibPoll()
+        if self.dxCluster:
+          if self.dxCluster.Poll():
+            self.station_screen.Refresh()
       if self.timer - self.slowheart_time0 > 0.5:
         self.slowheart_time0 = self.timer
         if self.w_phase:

quisk_conf_defaults.py

@@ -1287,6 +1287,18 @@ dc_remove_bw = 100
 #dc_remove_bw = 200
 #dc_remove_bw = 400
 
+## fixed_tune_offset		Fixed tune offset, integer
+# If this is zero, Quisk tunes as usual. The hardware frequency (the VFO or center frequency)
+# is fixed and Quisk tunes
+# within the spectrum returned by the hardware. Otherwise enter a fixed offset between the
+# center frequency and the tuning frequency. Then tuning is done by the hardware.
+# This is useful with Softrock hardware as
+# it simplifies the corrections for amplitude and phase imbalance.
+# Changes are immediate (no need to restart).
+fixed_tune_offset = 0
+#fixed_tune_offset = 5000
+#fixed_tune_offset = 10000
+
 
 
 
@@ -1916,6 +1928,8 @@ btn_text_switch = u"\u21C4"		# Character to switch left-right
 color_scheme = 'A'
 #color_scheme = 'B'
 #color_scheme = 'C'
+#color_scheme = 'DK1MI_GR'
+#color_scheme = 'DK1MI_AM'
 
 ## waterfall_palette			Waterfall colors, text choice
 # This controls the colors used in the waterfall.  The default color scheme is A, and you can change this scheme
@@ -1923,6 +1937,7 @@ color_scheme = 'A'
 waterfall_palette = 'A'
 #waterfall_palette = 'B'
 #waterfall_palette = 'C'
+#waterfall_palette = 'DK1MI_AM'
 
 
 
@@ -1957,6 +1972,8 @@ color_txline		= 'red'					# vertical line color for tx in graph
 color_rxline		= 'green'				# vertical line color for rx in graph
 color_graph_msg_fg	= 'black'				# text messages on the graph screen
 color_graph_msg_bg	= 'lemonchiffon2'		# background of text messages on the graph screen
+color_onoff		= '#77DD77'			# on/off power button
+color_onoff_text	= 'black'				# on/off power button text
 
 # This color scheme B, a dark color scheme designed by Steve Murphy, KB8RWQ.
 # Additional colors added by N2ADR.
@@ -1986,6 +2003,8 @@ color_scheme_B = {
 'color_rxline'		: 'green',
 'color_graph_msg_fg'		: 'white',
 'color_graph_msg_bg'		: '#111111',
+'color_onoff'			: '#77DD77',
+'color_onoff_text'		: 'black',
 }
 
 # This is color scheme C:
@@ -2023,12 +2042,73 @@ color_scheme_C = {
 'color_rxline'		: '#3CC918',
 'color_graph_msg_fg'	: '#000000',
 'color_graph_msg_bg'	: 'lemonchiffon2',
+'color_onoff'		: '#77DD77',
+'color_onoff_text'	: 'black',
 }
 #############################################################################################
+# This is a green dark color scheme designed by Michael
+color_scheme_DK1MI_GR = {
+    'color_bg'            : '#0F0F0F', # Lower screen background
+    'color_bg_txt'        : '#00CC00', # Lower screen text color
+    'color_graph'         : '#0F0F0F', # Graph background
+    'color_config2'       : '#008000', # color in tab row of config screen
+    'color_gl'            : '#2F4F4F', # Lines on the graph
+    'color_graphticks'    : '#CCCCCC', # Graph ticks
+    'color_graphline'     : '#00FF00', # graph data line color
+    'color_graphlabels'   : '#00FF00', # graph label color
+    'color_btn'           : '#141414', # button color
+    'color_check_btn'     : '#005500', # color of a check button when it is checked
+    'color_cycle_btn'     : '#005500', # color of a cycle button when it is checked
+    'color_adjust_btn'    : '#005500', # color of an adjustable button when it is checked
+    'color_test'          : '#005500', # color of a button used for test (turn off for tx)
+    'color_freq'          : '#208B57', # background color of frequency and s-meter
+    'color_freq_txt'      : '#00FF00', # text color of frequency display
+    'color_entry'         : '#2E2E2E', # frequency entry box
+    'color_entry_txt'     : '#00FF00', # text color of entry box
+    'color_enable'        : '#00CC00', # text color for an enabled button
+    'color_disable'       : '#FF0000', # text color for a disabled button
+    'color_popchoice'     : '#555555', # text color for button that pops up a row of buttons
+    'color_bandwidth'     : '#003300', # color for bandwidth display; thanks to WB4JFI
+    'color_txline'        : '#00CC00', # vertical line color for tx in graph
+    'color_rxline'        : '#00FF00', # vertical line color for rx in graph
+    'color_graph_msg_fg'  : '#008800', # text messages on the graph screen
+    'color_graph_msg_bg'  : '#1E1E1E', # background of text messages on the graph screen
+    'color_onoff'         : '#005500', # On/Off button
+    'color_onoff_text'    : '#FF0000', # On/Off text
+}
+#############################################################################################
+# This is an amber dark color scheme designed by Michael
+color_scheme_DK1MI_AM = {
+    'color_bg'            : '#0F0F0F', # Lower screen background
+    'color_bg_txt'        : '#FFBF00', # Lower screen text color
+    'color_graph'         : '#0F0F0F', # Graph background
+    'color_config2'       : '#FF8000', # Color in tab row of config screen
+    'color_gl'            : '#2F4F4F', # Lines on the graph
+    'color_graphticks'    : '#CCCCCC', # Graph ticks
+    'color_graphline'     : '#FFBF00', # Graph data line color
+    'color_graphlabels'   : '#FFBF00', # Graph label color
+    'color_btn'           : '#141414', # Button color
+    'color_check_btn'     : '#865E2E', # Color of a check button when it is checked
+    'color_cycle_btn'     : '#865E2E', # Color of a cycle button when it is checked
+    'color_adjust_btn'    : '#865E2E', # Color of an adjustable button when it is checked
+    'color_test'          : '#865E2E', # Color of a button used for test (turn off for tx)
+    'color_freq'          : '#FF9933', # Background color of frequency and s-meter
+    'color_freq_txt'      : '#000000', # Text color of frequency display
+    'color_entry'         : '#2E2E2E', # Frequency entry box
+    'color_entry_txt'     : '#FFBF00', # Text color of entry box
+    'color_enable'        : '#FFBF00', # Text color for an enabled button
+    'color_disable'       : '#FF0000', # Text color for a disabled button
+    'color_popchoice'     : '#555555', # Text color for button that pops up a row of buttons
+    'color_bandwidth'     : '#4B2E0F', # Color for bandwidth display
+    'color_txline'        : '#FFBF00', # Vertical line color for tx in graph
+    'color_rxline'        : '#FF8000', # Vertical line color for rx in graph
+    'color_graph_msg_fg'  : '#FF8000', # Text messages on the graph screen
+    'color_graph_msg_bg'  : '#1E1E1E', # Background of text messages on the graph screen
+    'color_onoff'         : '#865E2E', # On/Off button
+    'color_onoff_text'    : '#FF0000', # On/Off text
+}
 
-
+# These are the palettes for the waterfall.
-# These are the palettes for the waterfall.  The one used is named waterfallPallette,
-# so to use a different one, overwrite this name in your configuration file.
 waterfallPalette = (
      (  0,   0,   0,   0),
      ( 36,  85,   0, 255),
@@ -2086,6 +2166,18 @@ waterfallPaletteC = (	# from David Fainitski
 (255, 245, 99, 3)
 ) 
 
+waterfallPaletteDK1MI_AM = (	# from Michael
+    (0, 0, 0, 0),
+    (32, 25, 20, 0),
+    (64, 58, 40, 6),
+    (96, 78, 50, 16),
+    (128, 120, 85, 29),
+    (160, 144, 100, 51),
+    (192, 195, 140, 43),
+    (224, 198, 150, 35),
+    (255, 255, 191, 0)
+)
+
 # This is the data used to draw colored lines on the frequency X axis to
 # indicate CW and Phone sub-bands.  You can make it anything you want.
 # These are the colors used for sub-bands:

quisk_conf_kx3.py

@@ -29,9 +29,10 @@ class Hardware(BaseHardware):
     # self.hamlib_rigctld_port = 4532		# Standard rigctld control port
     # self.hamlib_poll_seconds = 0.2		# Time interval to poll for changes
   def open(self):
+    # Thanks to Peter, DC6AR, Rig ID changed from 229 to 2045.
     ret = BaseHardware.open(self)
     if not self.hamlib_connected:	# rigctld is not started.  Try to start it.
-      os.system("rigctld -m 229 -r /dev/ttyUSB0 -s 4800 & ")	# Check the baud rate menu setting
+      os.system("rigctld -m 2045 -r /dev/ttyUSB0 -s 4800 & ")	# Check the baud rate menu setting
       # If this fails, start rigctld by hand.
     return ret
 

quisk_hardware_model.py

@@ -120,6 +120,8 @@ class Hardware:
     self.application.bandscope_clock = clock
   #def PollCwKey(self):  # Optional. Called frequently by the sound thread to check the CW key status.
   #  pass        # Do not define if not needed.
+  #def PollGuiControl(self):  # Optional. Called frequently by the GUI thread to change GUI settings (PTT etc.)
+  #  pass        # Do not define if not needed.
   def StartSamples(self):	# Quisk calls this from the sound thread to start sending samples.
     # If you return a string, it replaces the string returned from hardware open()
     pass

setup.py

@@ -7,7 +7,7 @@ import os
 # You must define the version here.  A title string including
 # the version will be written to __init__.py and read by quisk.py.
 
-Version = '4.2.35'
+Version = '4.2.41'
 
 fp = open("__init__.py", "w")	# write title string
 fp.write("#Quisk version %s\n" % Version)
@@ -85,7 +85,7 @@ N1MM+ and software that uses Hamlib.
 	url = 'http://james.ahlstrom.name/quisk/',
 	packages = ['quisk', 'quisk.n2adr', 'quisk.softrock', 'quisk.freedvpkg',
 		'quisk.hermes', 'quisk.hiqsdr', 'quisk.afedrinet', 'quisk.soapypkg',
-		'quisk.sdrmicronpkg', 'quisk.perseuspkg', 'quisk.ac2yd'],
+		'quisk.sdrmicronpkg', 'quisk.perseuspkg', 'quisk.ac2yd', 'quisk.multuspkg'],
 	package_dir =  {'quisk' : '.'},
 	package_data = {'' : ['*.txt', '*.html', '*.so', '*.dll']},
 	entry_points = {'gui_scripts' : ['quisk = quisk.quisk:main', 'quisk_vna = quisk.quisk_vna:main']},

softrock/hardware_usb.py

@@ -178,6 +178,8 @@ class Hardware(BaseHardware):
       vfo = self.vfo + int(offset * 1000)	# Convert kHz to Hz
       self.ChangeFrequency(vfo, vfo, 'repeater')
     return False
+  def ImmediateChange(self, name):
+    return
   def OnSpot(self, level):
     pass
   def HeartBeat(self):	# Called at about 10 Hz by the main

sound.c

@@ -88,6 +88,7 @@ static int close_file_rec;
 double digital_output_level = 0.7;
 static double file_play_level = 1.0;
 static int dc_remove_bw=100;			// bandwidth of DC removal filter
+static int multus_cw_samples = 0;		// always send CW Tx samples to the Multus radio, even in Rx
 
 static ty_sample_start pt_sample_start;
 static ty_sample_stop  pt_sample_stop;
@@ -1109,7 +1110,7 @@ int quisk_read_sound(void)	// Called from sound thread
 		if (is_cw) {	// Transmit CW; use capture device for timing, not microphone
 			cwCount += (double)retval * quisk_MicPlayback.sample_rate / quisk_sound_state.sample_rate;
 			mic_count = 0;
-			if (QUISK_CWKEY_DOWN || quiskSpotLevel >= 0) {
+			if (QUISK_CWKEY_DOWN || quiskSpotLevel >= 0 || multus_cw_samples) {
 				while (cwCount >= 1.0) {
 					if (cwEnvelope < 1.0) {
 						cwEnvelope += 1. / (quisk_MicPlayback.sample_rate * 5e-3);	// 5 milliseconds
@@ -1601,10 +1602,9 @@ PyObject * quisk_micplay_channels(PyObject * self, PyObject * args)	// Called fr
 PyObject * quisk_set_sparams(PyObject * self, PyObject * args, PyObject * keywds)
 {  /* Call with keyword arguments ONLY; change local parameters */
 	static char * kwlist[] = {"dc_remove_bw", "digital_output_level", "remote_control_slave", "remote_control_head",
-		"file_play_level", NULL} ;
+		"file_play_level", "multus_cw_samples", NULL} ;
-
+	if (!PyArg_ParseTupleAndKeywords (args, keywds, "|idiidi", kwlist, &dc_remove_bw, &digital_output_level,
-	if (!PyArg_ParseTupleAndKeywords (args, keywds, "|idiid", kwlist, &dc_remove_bw, &digital_output_level,
+	&remote_control_slave, &remote_control_head, &file_play_level, &multus_cw_samples))
-	&remote_control_slave, &remote_control_head, &file_play_level))
 		return NULL;
 	Py_INCREF (Py_None);
 	return Py_None;