Quisk version 4.2.35

CHANGELOG.txt

@@ -1,3 +1,47 @@
+Quisk Version 4.2.35  June 2024
+===============================
+There is a new item "File play level" on the Config/radio/Sound screen to reduce the volume when playing files.
+Use it to reduce the volume of the CQ message relative to radio sound.
+
+Dan, AI2M, provided a patch to compile in MacOS on Apple Silicon. Thanks Dan!
+
+I am working on better amplitude and phase adjustments when using SoftRock radios. The new corrections
+screen has a spreadsheet to display the VFO and tune offset. And there is a feature to automatically
+measure the corrections when using a signal generator as a source. If you use Quisk with SoftRock or similar
+radios, please let me know what you think.
+
+Quisk Version 4.2.34  May 2024
+==============================
+For the Hermes-Lite2 the inhibit Tx function (CN8) now releases the Spot button.
+
+Quisk displays the band plan below the X-axis as colored bars, and there are eighteen possible colors.
+If you hover the mouse over a bar, Quisk now displays the name of the mode. Recall that there is a dialog
+box so you can set the band plan to what you want.
+ 
+Quisk Version 4.2.33  May 2024
+==============================
+Added the get_level Hamlib command "l STRENGTH". It returns the S-meter reading. I finally found some Hamlib
+documentation, often not an easy task.  The return value of STRENGTH is in dB with zero dB equal to S9.
+There are 6 dB per S-unit. So a STRENGTH of 4 is 4dB over S9, and -6, -12, -18 is S8, S7, S6. I also added
+the corresponding FlexRadio command ZZSM.
+
+Quisk Version 4.2.32  April 2024
+================================
+I found and fixed a bug in the microphone filters that can result in a buffer overrun. You should update Quisk.
+
+Some Linux digital programs can not use the usual Quisk Pulse loopback device and must use an
+Alsa loopback. I added more documentation for Alsa loopbacks, added more information on the Sound
+screen and I changed the default Alsa sample size to 16 bit.
+
+Quisk now responds to the Hermes Lite2 Tx inhibit input by displaying a message and extinguishing the "Tx" light.
+There is a new item "Hermes Lite2 protocol" on the Hardware screen to control this behavior.
+
+Quisk Version 4.2.31  March 2024
+================================
+The "Tune" item was missing from the Midi menus. I fixed it but I didn't test it because I did
+not borrow Ben's Midi controller. Please test it yourself and let me know if it works. The Midi
+speed can be set from the menu too.
+
 Quisk Version 4.2.30  March 2024
 ================================
 A new option "Tx-Rx silence msec" on the Timing configuration screen controls how long

__init__.py

@@ -1,2 +1,2 @@
-#Quisk version 4.2.30
+#Quisk version 4.2.35
 from .quisk import main

configure.py

@@ -1,13 +1,9 @@
-
+import sys, wx, wx.lib, os, re, pickle, traceback, json, copy
-from __future__ import print_function
-from __future__ import absolute_import
-from __future__ import division
-
-import sys, wx, wx.lib, os, re, pickle, traceback, json
 # Quisk will alter quisk_conf_defaults to include the user's config file.
 import quisk_conf_defaults as conf
 import _quisk as QS
 from quisk_widgets import QuiskPushbutton, QuiskCheckbutton, QuiskBitField, SliderBoxH, SliderBoxHH
+from quisk_widgets import FreqFormatter
 from quisk_widgets import wxVersion
 if wxVersion in ('2', '3'):
   import wx.combo as wxcombo
@@ -170,12 +166,16 @@ class Configuration:
         radio_dict["Hermes_BandDictTx"] = {}
   def UpdateGlobals(self):
     self.RadioName = Settings[1]
+    application.BandPlanC2T = {}
     if self.RadioName == "ConfigFileRadio":
       application.BandPlan = conf.BandPlan
+      for mode, color in conf.BandPlanColors:
+        application.BandPlanC2T[color] = mode
     elif "BandPlanColors" in Settings[4] and "BandPlan" in Settings[4]:
       mode_dict = {"End":None}
       for mode, color in Settings[4]["BandPlanColors"]:
         mode_dict[mode] = color
+        application.BandPlanC2T[color] = mode
       plan = []
       for freq, mode in Settings[4]["BandPlan"]:
         freq = int(float(freq) * 1E6 + 0.1)
@@ -188,6 +188,8 @@ class Configuration:
       application.BandPlan = plan
     else:
       application.BandPlan = conf.BandPlan
+      for mode, color in conf.BandPlanColors:
+        application.BandPlanC2T[color] = mode
     if "MidiNoteDict" not in Settings[4]:
       Settings[4]["MidiNoteDict"] = {}
       self.settings_changed = True
@@ -829,12 +831,10 @@ class QPowerMeterCalibration(wx.Frame):
 
 ## Note: The amplitude/phase adjustments have ideas provided by Andrew Nilsson, VK6JBL.
 ## October 2020: changed to make RxTx frequency and VFO two independent variables.
+## June 2024: Added a Grid control and automatic receive measurement.
 class QAdjustPhase(wx.Frame):
   """Create a window with amplitude and phase adjustment controls"""
-  f_ampl = "Amplitude adjustment %.6f"
-  f_phase = "Phase adjustment degrees %.6f"
   def __init__(self, parent, width, rx_tx):
-    self.width = width
     self.rx_tx = rx_tx		# Must be "rx" or "tx"
     if rx_tx == 'tx':
       self.is_tx = 1
@@ -842,121 +842,231 @@ class QAdjustPhase(wx.Frame):
     else:
       self.is_tx = 0
       t = "Adjust Sound Card Receive Amplitude and Phase"
-    wx.Frame.__init__(self, application.main_frame, -1, t, pos=(50, 100), style=wx.CAPTION)
+    wx.Frame.__init__(self, application.main_frame, -1, t, pos=(50, 100), style=wx.CAPTION|wx.RESIZE_BORDER)
+    self.client_width = application.screen_width * 5 // 10 
+    self.SetClientSize((self.client_width, application.screen_height * 5 // 10))
+    self.new_amplitude = self.new_phase = 0.0
+    self.new_tune = 0
+    self.bandAmplPhase = copy.deepcopy(application.bandAmplPhase)
+    self.new_cell = None
+    self.dirty = False
+    self.manual = True
     self.panel = wx.Panel(self)
     self.MakeControls()
     self.Redraw()
     self.Show()
+    self.Bind(wx.EVT_CLOSE, self.OnBtnExit)
+    QS.softrock_corrections(1)
+    QS.set_ampl_phase(0.0, 0.0, self.is_tx)
+    self.grid.GoToCell(0, 2)
   def MakeControls(self):		# Make controls for phase/amplitude adjustment
     panel = self.panel
-    width = self.width
+    sizer = wx.BoxSizer(wx.VERTICAL)
-    self.old_amplitude, self.old_phase = application.GetAmplPhase(self.rx_tx)
+    panel.SetSizer(sizer)
-    self.new_amplitude, self.new_phase = self.old_amplitude, self.old_phase
+    sl_max = application.screen_width * 4 // 10		# maximum +/- value for slider
-    sl_max = width * 4 // 10		# maximum +/- value for slider
     self.ampl_scale = float(conf.rx_max_amplitude_correct) / sl_max
     self.phase_scale = float(conf.rx_max_phase_correct) / sl_max
-    font = wx.Font(conf.default_font_size, wx.FONTFAMILY_SWISS, wx.NORMAL,
+    main_font = wx.Font(conf.default_font_size, wx.FONTFAMILY_SWISS, wx.NORMAL,
           wx.FONTWEIGHT_NORMAL, False, conf.quisk_typeface)
-    self.SetFont(font)
+    self.SetFont(main_font)
+    panel.SetFont(main_font)
     charx = self.GetCharWidth()
-    self.tab1 = tab1 = charx
     chary = self.GetCharHeight()
-    deltay = chary * 12 // 10
+    # Create the grid heading and Destroy button
-    y = chary * 3 // 10
+    self.cell_amph = wx.StaticText(panel, -1, "")
-    self.controls = []
+    font = wx.Font(conf.default_font_size, wx.FONTFAMILY_SWISS, wx.NORMAL,
-    txt = wx.StaticText(panel, -1, "No data", pos=(tab1, y))
+          wx.FONTWEIGHT_BOLD, False, conf.quisk_typeface)
-    self.controls.append(txt)
+    self.cell_amph.SetFont(font)
-    y += txt.GetSize().GetHeight()
+    self.cell_amph.SetLabel("Cell frequency %s, gain %.3f, phase %.3f\u00B0      " % (FreqFormatter(144000000), -1.123, -12.456))
-    #y += deltay * 14 // 10
+    dv = wx.lib.buttons.GenButton(panel, label="  Destroy  ")
-    self.t_ampl = wx.StaticText(panel, -1, self.f_ampl % self.old_amplitude, pos=(tab1, y))
+    dv.SetBezelWidth(3)
-    self.controls.append(self.t_ampl)
+    dv.SetBackgroundColour("#DDD")
-    y += deltay
+    dv.Bind(wx.EVT_BUTTON, self.OnBtnDestroy)
-    fine = wx.StaticText(panel, -1, 'Fine', pos=(tab1, y))
+    hbox = wx.BoxSizer(wx.HORIZONTAL)
-    self.controls.append(fine)
+    sizer.Add(hbox, flag=wx.BOTTOM|wx.EXPAND, border=chary * 3 // 10)
-    coarse = wx.StaticText(panel, -1, 'Coarse', pos=(tab1, y + deltay))
+    hbox.Add(self.cell_amph, flag=wx.ALL|wx.ALIGN_CENTER_VERTICAL, border=chary // 2)
-    self.controls.append(coarse)
+    hbox.Add(dv, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER_VERTICAL, border=charx * 5)
-    tab2 = tab1 + coarse.GetSize().GetWidth() + charx
+    # Create the grid
-    sliderX = width - tab2 - charx
+    self.grid = wx.grid.Grid(panel, style=wx.BORDER_SIMPLE)
-    self.ampl1 = wx.Slider(panel, -1, 0, -sl_max, sl_max, pos=(tab2, y), size=(sliderX, -1))
+    self.grid.CreateGrid(4, 3)
-    self.controls.append(self.ampl1)
+    self.grid.HideRowLabels()
-    y += deltay
+    self.selected_row = 0
-    self.ampl2 = wx.Slider(panel, -1, 0, -sl_max, sl_max, pos=(tab2, y), size=(sliderX, -1))
+    self.selected_col = 0
-    self.controls.append(self.ampl2)
+    self.cell_bg_color = self.grid.GetDefaultCellBackgroundColour()
-    y += deltay * 14 // 10
+    self.grid.SetDefaultCellFont(main_font)
-    self.PosAmpl(self.old_amplitude)
+    width, h = self.GetTextExtent("987-24 000")
-    self.t_phase = wx.StaticText(panel, -1, self.f_phase % self.old_phase, pos=(tab1, y))
+    self.grid.SetDefaultColSize(width, True)
-    self.controls.append(self.t_phase)
+    self.grid.EnableEditing(False)
-    y += deltay
+    self.grid.SetColLabelValue(0, "Band")
-    fine = wx.StaticText(panel, -1, 'Fine', pos=(tab1, y))
+    self.grid.SetColLabelValue(1, "VFO")
-    self.controls.append(fine)
+    self.grid.SetColLabelValue(2, "Tune")
-    coarse = wx.StaticText(panel, -1, 'Coarse', pos=(tab1, y + deltay))
+    self.grid.SetColSize(0, width // 2)
-    self.controls.append(coarse)
+    self.grid.SetColSize(1, width * 14 // 10)
-    self.phase1 = wx.Slider(panel, -1, 0, -sl_max, sl_max, pos=(tab2, y), size=(sliderX, -1))
+    num_tune = (self.client_width - width * 2) // width
-    self.controls.append(self.phase1)
+    #print ("num_tune", num_tune)
-    y += deltay
+    for col in range(3, num_tune + 2):
-    self.phase2 = wx.Slider(panel, -1, 0, -sl_max, sl_max, pos=(tab2, y), size=(sliderX, -1))
+      self.grid.AppendCols()
-    self.controls.append(self.phase2)
+      self.grid.SetColLabelValue(col, "Tune")
-    y += deltay
+    #self.grid.Bind(wx.grid.EVT_GRID_CELL_LEFT_CLICK, self.OnGridLeftClick)
-    sv = QuiskPushbutton(panel, self.OnBtnSave, 'Save')
+    self.grid.Bind(wx.grid.EVT_GRID_SELECT_CELL, self.OnGridSelectCell)
-    self.controls.append(sv)
+    gbox = wx.BoxSizer(wx.VERTICAL)
-    dv = QuiskPushbutton(panel, self.OnBtnDestroyVFO, 'Destroy VFO')
+    sizer.Add(gbox, proportion=1, flag=wx.LEFT|wx.RIGHT|wx.EXPAND, border=charx)
-    self.controls.append(dv)
+    gbox.Add(self.grid, proportion=1)
-    ds = QuiskPushbutton(panel, self.OnBtnDestroyALL, 'Destroy ALL')
+    # Create the New Cell text, Manual/Measure, AddCell button
-    self.controls.append(ds)
+    sbs = wx.StaticBoxSizer(wx.VERTICAL, panel, " New Cell")
-    cn = QuiskPushbutton(panel, self.OnBtnFinished, 'Finished')
+    sizer.Add(sbs, flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT|wx.BOTTOM, border=charx*3)
-    self.controls.append(cn)
+    self.add_cell_text = wx.StaticText(panel, -1, "Band")
-    hl = QuiskPushbutton(panel, self.OnBtnHelp, 'Help')
+    self.add_cell_text.SetFont(main_font)
-    self.controls.append(hl)
+    sbs.Add(self.add_cell_text, flag=wx.LEFT|wx.TOP, border=charx)
-    w, h = ds.GetSize().Get()
+    box0 = wx.BoxSizer(wx.HORIZONTAL)
-    sv.SetSize((w, h))
+    sbs.Add(1, charx)
-    cn.SetSize((w, h))
+    sbs.Add(box0, flag=wx.EXPAND)
-    hl.SetSize((w, h))
+    rb_manual = wx.RadioButton(panel, -1, "Manual adjustment", style=wx.RB_GROUP)
-    y += h * 5 // 10
+    self.Bind(wx.EVT_RADIOBUTTON, self.OnBtnManMeasure)
-    x = (width - w * 5) // 6
+    rb_measure = wx.RadioButton(panel, -1, "Measure")
-    sv.SetPosition((x, y))
+    if self.is_tx:
-    dv.SetPosition((x*2 + w, y))
+      rb_manual.Enable(False)
-    ds.SetPosition((x*3 + w*2, y))
+      rb_measure.Enable(False)
-    cn.SetPosition((x*4 + w*3, y))
+    b = wx.lib.buttons.GenButton(panel, label="  Add cell  ")
-    hl.SetPosition((x*5 + w*4, y))
+    b.Bind(wx.EVT_BUTTON, self.OnBtnAddCell)
-    sv.SetBackgroundColour('light blue')
+    b.SetBezelWidth(3)
-    dv.SetBackgroundColour('light blue')
+    b.SetBackgroundColour("#DDD")
-    ds.SetBackgroundColour('light blue')
+    box0.Add(rb_manual, flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL, border=charx)
-    cn.SetBackgroundColour('light blue')
+    box0.Add(rb_measure, flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL, border=charx*5)
-    hl.SetBackgroundColour('light blue')
+    box0.Add(b, flag=wx.LEFT, border=charx*5)
-    y += h
+    # Create the amplitude slider controls
-    y += h * 4 // 10
+    box1 = wx.BoxSizer(wx.HORIZONTAL)
-    self.PosPhase(self.old_phase)
+    box2 = wx.BoxSizer(wx.HORIZONTAL)
-    self.SetClientSize(wx.Size(width, y))
+    sbs.Add(box1, flag=wx.EXPAND)
-    self.ampl1.Bind(wx.EVT_SCROLL, self.OnChange)
+    sbs.Add(box2, flag=wx.EXPAND)
+    # ST_ELLIPSIZE_END needed to work around a layout bug
+    fine = wx.StaticText(panel, -1, 'Gain Fine', style=wx.ST_ELLIPSIZE_END)
+    coarse = wx.StaticText(panel, -1, 'Gain Coarse', style=wx.ST_ELLIPSIZE_END)
+    box1.Add(fine, flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL, border=charx*3)
+    box2.Add(coarse, flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL, border=charx*3)
+    self.ampl1 = wx.Slider(panel, -1, 0, -sl_max, sl_max)
+    self.ampl2 = wx.Slider(panel, -1, 0, -sl_max, sl_max)
+    box1.Add(self.ampl1, flag=wx.LEFT, proportion=1, border=0)
+    box2.Add(self.ampl2, flag=wx.LEFT, proportion=1, border=0)
+    self.ampl1.Bind(wx.EVT_SCROLL, self.OnAmpl1)
     self.ampl2.Bind(wx.EVT_SCROLL, self.OnAmpl2)
-    self.phase1.Bind(wx.EVT_SCROLL, self.OnChange)
+    # Create the phase slider controls
-    self.phase2.Bind(wx.EVT_SCROLL, self.OnPhase2)
+    box3 = wx.BoxSizer(wx.HORIZONTAL)
+    box4 = wx.BoxSizer(wx.HORIZONTAL)
+    sbs.Add(box3, flag=wx.EXPAND)
+    sbs.Add(box4, flag=wx.EXPAND)
+    fine = wx.StaticText(panel, -1, 'Phase Fine', style=wx.ST_ELLIPSIZE_END)
+    coarse = wx.StaticText(panel, -1, 'Phase Coarse', style=wx.ST_ELLIPSIZE_END)
+    box3.Add(fine, flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL, border=charx*3)
+    box4.Add(coarse, flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL, border=charx*3)
+    self.phas1 = wx.Slider(panel, -1, 0, -sl_max, sl_max)
+    self.phas2 = wx.Slider(panel, -1, 0, -sl_max, sl_max)
+    box3.Add(self.phas1, flag=wx.LEFT, proportion=1, border=0)
+    box4.Add(self.phas2, flag=wx.LEFT, proportion=1, border=0)
+    self.phas1.Bind(wx.EVT_SCROLL, self.OnPhase1)
+    self.phas2.Bind(wx.EVT_SCROLL, self.OnPhase2)
+    # Create the button row
+    btnbox = wx.BoxSizer(wx.HORIZONTAL)
+    sizer.Add(btnbox, flag=wx.EXPAND)
+    btns = []
+    btnbox.Add(1, 1, proportion=10)
+    b = wx.lib.buttons.GenButton(panel, label="  Save  ")
+    btnbox.Add(b)
+    btnbox.Add(1, 1, proportion=5)
+    btns.append(b)
+    size = b.GetSize()
+    b.Bind(wx.EVT_BUTTON, self.OnBtnSave)
+    b = wx.lib.buttons.GenButton(panel, label="  Exit  ")
+    btnbox.Add(b)
+    btnbox.Add(1, 1, proportion=5)
+    btns.append(b)
+    b.Bind(wx.EVT_BUTTON, self.OnBtnExit)
+    b = wx.lib.buttons.GenButton(panel, label="  Help  ")
+    btnbox.Add(b)
+    btnbox.Add(1, 1, proportion=10)
+    btns.append(b)
+    b.Bind(wx.EVT_BUTTON, self.OnBtnHelp)
+    for b in btns:
+      b.SetBezelWidth(3)
+      b.SetBackgroundColour("#DDD")
+      b.SetSize(size)
+    sizer.Add(charx, chary)
   def Redraw(self):
-    # Print available data points
+    self.grid.ClearGrid()
-    self.band = application.lastBand
+    # Print available data cells
-    data = application.bandAmplPhase.get(self.band, {})
+    row = 0
-    data = data.get(self.rx_tx, [])
+    bands = []
-    if data:
+    self.cell_dict = {}
-      t = "Band %s VFO and frequency list\n" % self.band
+    for band in self.bandAmplPhase:
-      for vfo, items in data:
+      if band != "Version" and self.rx_tx in self.bandAmplPhase[band]:
-        t += "%10d:" % vfo
+        bands.append(band)
-        for freq, ampl, phase in items:
+    bands.sort(reverse=True)
-          t += " %7d" % freq
+    for band in bands:
-        t += "\n"
+      vfos_tunes = self.bandAmplPhase[band][self.rx_tx]
+      if vfos_tunes:
+        if self.grid.GetNumberRows() <= row:
+          self.grid.AppendRows()
+        self.grid.SetCellValue(row, 0, band)
+        self.grid.SetCellAlignment(row, 0, wx.ALIGN_CENTER, wx.ALIGN_CENTER)
+        for vfo, tunes in vfos_tunes:
+          if self.grid.GetNumberRows() <= row:
+            self.grid.AppendRows()
+          self.cell_dict[(row, 0)] = band, vfo, 0.0
+          self.grid.SetCellValue(row, 1, FreqFormatter(vfo))
+          self.grid.SetCellAlignment(row, 1, wx.ALIGN_RIGHT, wx.ALIGN_CENTER)
+          col = 2
+          for tune, ampl, phase in tunes:
+            if self.grid.GetNumberCols() <= col:
+              self.grid.AppendCols()
+              self.grid.SetColLabelValue(col, "Tune")
+            self.grid.SetCellValue(row, col, FreqFormatter(tune))
+            self.grid.SetCellAlignment(row, col, wx.ALIGN_RIGHT, wx.ALIGN_CENTER)
+            self.cell_dict[(row, col)] = tune, ampl, phase
+            if (vfo, tune) == self.new_cell:
+              self.grid.GoToCell(row, col)
+            col += 1
+          row += 1
+    self.new_cell = None
+    self.grid.ForceRefresh()
+  def SetNewCellText(self):
+    vfo = FreqFormatter(application.VFO)
+    self.add_cell_text.SetLabel("Band %s,  Center (VFO) %s,  Tune %d,  Gain %5.3f,  Phase %5.3f\u00B0" % (
+          application.lastBand, vfo, self.new_tune, self.new_amplitude + 1.0, self.new_phase))
+  def SlowHeartBeat(self):
+    if self.manual:
+      self.new_tune = application.txFreq
     else:
-      t = "Band %s: No data." % self.band
+      self.new_tune, gain, phase = QS.softrock_corrections(2)
-    x, y = self.controls[0].GetPosition()
+      ampl = gain - 1.0
-    height = self.controls[0].GetSize().GetHeight()
+      self.new_amplitude = ampl
-    self.controls[0].Destroy()
+      phase *= 57.2958
-    txt = wx.StaticText(self.panel, -1, t, pos=(self.tab1, y))
+      self.new_phase = phase
-    self.controls[0] = txt
+      self.PosAmpl(ampl)
-    delta = txt.GetSize().GetHeight() - height
+      self.PosPhase(phase)
-    for ctrl in self.controls[1:]:
+    self.SetNewCellText()
-      x, y = ctrl.GetPosition()
+  def OnGridSelectCell(self, event=None):
-      y += delta
+    self.grid.SetCellBackgroundColour(self.selected_row, self.selected_col, self.cell_bg_color)
-      ctrl.Move(x, y)
+    if event:
-    h = self.GetClientSize().GetHeight()
+      event.Skip()
-    self.SetClientSize(wx.Size(self.width, h + delta))
+      row = self.selected_row = event.GetRow()
+      col = self.selected_col = event.GetCol()
+    else:
+      row = self.selected_row
+      col = self.selected_col
+    self.grid.SetCellBackgroundColour(row, col, '#FEA')
+    self.grid.ForceRefresh()
+    band, vfo, z = self.cell_dict.get((row, 0), ('', None, 0))
+    tune, am, ph = self.cell_dict.get((row, col), (None, None, None))
+    if not band or vfo is None:
+      self.cell_amph.SetLabel("Cell is empty")
+    elif col == 0:
+      self.cell_amph.SetLabel("Band %s" % band)
+    elif col == 1:
+      self.cell_amph.SetLabel("Center (VFO) frequency %s" % FreqFormatter(vfo))
+    elif tune is None:
+      self.cell_amph.SetLabel("Cell is empty")
+    else:
+      self.cell_amph.SetLabel("Cell frequency %s, gain %.3f, phase %.3f\u00B0" % (FreqFormatter(vfo + tune), am + 1.0, ph))
   def PosAmpl(self, ampl):	# set pos1, pos2 for amplitude
     pos2 = round(ampl / self.ampl_scale)
     remain = ampl - pos2 * self.ampl_scale
@@ -967,81 +1077,172 @@ class QAdjustPhase(wx.Frame):
     pos2 = round(phase / self.phase_scale)
     remain = phase - pos2 * self.phase_scale
     pos1 = round(remain / self.phase_scale * 50.0)
-    self.phase1.SetValue(pos1)
+    self.phas1.SetValue(pos1)
-    self.phase2.SetValue(pos2)
+    self.phas2.SetValue(pos2)
-  def OnChange(self, event):
-    ampl = self.ampl_scale * self.ampl1.GetValue() / 50.0 + self.ampl_scale * self.ampl2.GetValue()
-    if abs(ampl) < self.ampl_scale * 3.0 / 50.0:
-      ampl = 0.0
-    self.t_ampl.SetLabel(self.f_ampl % ampl)
-    phase = self.phase_scale * self.phase1.GetValue() / 50.0 + self.phase_scale * self.phase2.GetValue()
-    if abs(phase) < self.phase_scale * 3.0 / 50.0:
-      phase = 0.0
-    self.t_phase.SetLabel(self.f_phase % phase)
-    QS.set_ampl_phase(ampl, phase, self.is_tx)
-    self.new_amplitude, self.new_phase = ampl, phase
   def OnAmpl2(self, event):		# re-center the fine slider when the coarse slider is adjusted
     ampl = self.ampl_scale * self.ampl1.GetValue() / 50.0 + self.ampl_scale * self.ampl2.GetValue()
     self.PosAmpl(ampl)
-    self.OnChange(event)
+    self.OnAmpl1(event)
+  def OnAmpl1(self, event):
+    ampl = self.ampl_scale * self.ampl1.GetValue() / 50.0 + self.ampl_scale * self.ampl2.GetValue()
+    self.new_amplitude = ampl
+    self.SetNewCellText()
+    QS.set_ampl_phase(self.new_amplitude, self.new_phase, self.is_tx)
   def OnPhase2(self, event):	# re-center the fine slider when the coarse slider is adjusted
-    phase = self.phase_scale * self.phase1.GetValue() / 50.0 + self.phase_scale * self.phase2.GetValue()
+    phase = self.phase_scale * self.phas1.GetValue() / 50.0 + self.phase_scale * self.phas2.GetValue()
     self.PosPhase(phase)
-    self.OnChange(event)
+    self.OnPhase1(event)
-  def OnBtnDestroyVFO(self, event):	# Remove entry with the application VFO
+  def OnPhase1(self, event):
-    data = application.bandAmplPhase.get(self.band, {})
+    phase = self.phase_scale * self.phas1.GetValue() / 50.0 + self.phase_scale * self.phas2.GetValue()
-    data = data.get(self.rx_tx, [])
+    self.new_phase = phase
-    for i in range(len(data)):
+    self.SetNewCellText()
-      if data[i][0] == application.VFO:
+    QS.set_ampl_phase(self.new_amplitude, self.new_phase, self.is_tx)
-        del data[i]
+  def OnBtnAddCell(self, event):
+    band = application.lastBand
+    vfo = application.VFO
+    self.new_cell = (vfo, self.new_tune)
+    ampl = self.new_amplitude
+    phase = self.new_phase
+    tune = self.new_tune
+    if band not in self.bandAmplPhase:
+      self.bandAmplPhase[band] = {}
+    if self.rx_tx not in self.bandAmplPhase[band]:
+      self.bandAmplPhase[band][self.rx_tx] = []
+    vfos_tunes = self.bandAmplPhase[band][self.rx_tx]
+    for i in range(0, len(vfos_tunes)):
+      vfo_tunes = vfos_tunes[i]
+      if vfo_tunes[0] == vfo:
+        tunes = vfo_tunes[1]
+        for j in range(0, len(tunes)):
+          if tunes[j][0] == tune:
+            tunes[j] = [tune, ampl, phase]
             break
+        else:
+          tunes.append([tune, ampl, phase])
+          tunes.sort()
+        self.dirty = True
         self.Redraw()
+        return
+    vfos_tunes.append([vfo, [[tune, ampl, phase]]])
+    vfos_tunes = vfos_tunes.sort()
+    self.dirty = True
+    self.Redraw()
+    self.grid.ClearSelection()
+  def OnBtnDestroy(self, event):
+    # Create a list of cells to be deleted
+    col_row = []
+    # print("Rows", self.grid.GetSelectedRows())
+    # print("Cols", self.grid.GetSelectedCols())
+    # print("Cells", self.grid.GetSelectedCells())
+    # print("Left", self.grid.GetSelectionBlockTopLeft())
+    # print("Right", self.grid.GetSelectionBlockBottomRight())
+    #
+    # delete the cell at the grid cursor
+    row = self.grid.GetGridCursorRow()
+    col = self.grid.GetGridCursorCol()
+    cr = col, row
+    if cr not in col_row:
+      col_row.append(cr)
+    #rows = self.grid.GetSelectedRows()	# Not used
+    # delete whole columns
+    cols = self.grid.GetSelectedCols()
+    for col in cols:
+      for row in range(0, self.grid.GetNumberRows()):
+        cr = col, row
+        if cr not in col_row:
+          col_row.append(cr)
+    # delete cells
+    cells = self.grid.GetSelectedCells()
+    for cell in cells:
+      row, col = cell.Get()
+      cr = col, row
+      if cr not in col_row:
+        col_row.append(cr)
+    # delete blocks
+    top_left_list = self.grid.GetSelectionBlockTopLeft()
+    bottom_right_list = self.grid.GetSelectionBlockBottomRight()
+    for i in range(len(top_left_list)):
+      row1, col1 = top_left_list[i].Get()
+      row2, col2 = bottom_right_list[i].Get()
+      for row in range(row1, row2 + 1):
+        for col in range(col1, col2 + 1):
+          cr = col, row
+          if cr not in col_row:
+            col_row.append(cr)
+    col_row.sort(reverse=True)
+    changed = False
+    for col, row in col_row:
+      try:
+        band, vfo, z = self.cell_dict[(row, 0)]
+        vfos_tunes = self.bandAmplPhase[band][self.rx_tx]
+      except:
+        continue
+      if col in (0, 1):		# Destroy row
+        for i in range(0, len(vfos_tunes)):
+          if vfos_tunes[i][0] == vfo:
+            del vfos_tunes[i]
+            changed = True
+            break
+      else:		# Destroy cell
+        try:
+          tune, am, ph = self.cell_dict[(row, col)]
+        except:
+          continue
+        for i in range(0, len(vfos_tunes)):
+          if vfos_tunes[i][0] != vfo:
+            continue
+          tunes = vfos_tunes[i][1]
+          for j in range(0, len(tunes)):
+            if tunes[j][0] == tune:
+              del tunes[j]
+              changed = True
+              break
+    if changed:
+      self.dirty = True
+      self.Redraw()
+      self.selected_row = self.grid.GetGridCursorRow()
+      self.selected_col = self.grid.GetGridCursorCol()
+      self.OnGridSelectCell()
+    self.grid.ClearSelection()
+  def OnBtnManMeasure(self, event):
+    self.manual = event.GetEventObject().GetLabel()[0:3] == "Man"
+    self.ampl1.Enable(self.manual)
+    self.ampl2.Enable(self.manual)
+    self.phas1.Enable(self.manual)
+    self.phas2.Enable(self.manual)
+    if self.manual:
+      QS.softrock_corrections(1)
+      QS.set_ampl_phase(self.new_amplitude, self.new_phase, self.is_tx)
+    else:
+      QS.softrock_corrections(2)
+      QS.set_ampl_phase(0.0, 0.0, self.is_tx)
   def OnBtnSave(self, event):
-    data = application.bandAmplPhase
+    application.bandAmplPhase = copy.deepcopy(self.bandAmplPhase)
-    if self.band not in data:
+    self.dirty = False
-      data[self.band] = {}
+  def OnBtnExit(self, event):
-    data = data[self.band]
+    if self.dirty:
-    if self.rx_tx not in data:
+      dlg = wx.MessageDialog(self,
-      data[self.rx_tx] = []
+        "Your changes are not saved. Do you want to save them?", "Changes Were Made",
-    data = data[self.rx_tx]
+        wx.OK|wx.CANCEL|wx.CANCEL_DEFAULT|wx.ICON_WARNING)
-    for vfo, items in data:		# All items must be lists, not tuples
+      dlg.SetOKLabel("Discard Changes")
-      if vfo == application.VFO:
+      ret = dlg.ShowModal()
-        for i in range(len(items)):
+      dlg.Destroy()
-          item = items[i]
+      if ret == wx.ID_CANCEL:
-          if item[0] == application.rxFreq:
+        return
-            item[1] = self.new_amplitude
+    QS.softrock_corrections(0)
-            item[2] = self.new_phase
-            break
-        else:
-          items.append([application.rxFreq, self.new_amplitude, self.new_phase])
-          items.sort()
-        break
-    else:
-      data.append([application.VFO, [[application.rxFreq, self.new_amplitude, self.new_phase]]])
-      data.sort()
-    self.Redraw()
-  def OnBtnDestroyALL(self, event):
-    dlg = wx.MessageDialog(self, "This will destroy all data for band %s!" % self.band,
-      "Destroy Data", style = wx.YES|wx.NO)
-    if dlg.ShowModal() == wx.ID_YES:
-      if self.band in application.bandAmplPhase:
-        del application.bandAmplPhase[self.band]
-      self.Redraw()
-  def OnBtnFinished(self, event=None):
     ampl, phase = application.GetAmplPhase(self.rx_tx)
     QS.set_ampl_phase(ampl, phase, self.is_tx)
     application.w_phase = None
     self.Destroy()
   def OnBtnHelp(self, event=None):
     dlg = wx.MessageDialog(self,
-'The "VFO" is the frequency at the center of the graph screen. The Rx or Tx frequency is the offset from the VFO. \
+'For manual adjustment attach a signal generator or look at a strong signal in the band. Set the Quisk frequency to the signal frequency. \
-Adjust the VFO and the frequency as desired.  Then adjust the sliders to minimize the image. Press "Save" when satisfied. \
+Adjust the amplitude and phase sliders to minimize the image. To save the adjustment, press Add Cell. \
-To adjust the VFO, use the band Up/Down buttons, or right click the graph at the desired VFO. \
+For automatic measurement, attach a signal generator and choose some frequencies. Press Add Cell for each one. \
 Adjustments must be made for both receive and transmit on each band. \
+No changes are made to the table of adjustments until you press Save. \
 The maximum slider adjustment range can be changed on the radio Hardware screen. \
-The other buttons will delete the data for the current VFO, or for the whole band. \
+For more information, press the main "Help" button, then "Documentation", then "SoftRock".'
-For more information, press the main "Help" button, \
-then "Documentation", then "SoftRock".'
     , "Adjustment Help", style=wx.OK)
     dlg.ShowModal()
 
@@ -1484,7 +1685,7 @@ class MidiKnob(QuiskControl):
     self.menu = wx.Menu()
     for name in application.midiControls:
       ctrl, func = application.midiControls[name]
-      if not ctrl or not func:
+      if name != "Tune" and (not ctrl or not func):
         continue
       item = self.menu.Append(-1, name)
       self.Bind(wx.EVT_MENU, self.OnMenu, item)
@@ -1519,7 +1720,7 @@ class MidiJogWheel(QuiskControl):
     controls = wx.Menu()
     for name in application.midiControls:
       ctrl, func = application.midiControls[name]
-      if not ctrl or not func:
+      if name != "Tune" and (not ctrl or not func):
         continue
       item = controls.Append(-1, name)
       self.Bind(wx.EVT_MENU, self.OnMenu, item)
@@ -2005,7 +2206,7 @@ class ControlMixin:
       if self.radio_name == Settings[1]:	# changed for current radio
         if name in ('hot_key_ptt_toggle', 'hot_key_ptt_if_hidden', 'keyupDelay', 'cwTone', 'pulse_audio_verbose_output',
                     'start_cw_delay', 'start_ssb_delay', 'maximum_tx_secs', 'quisk_serial_cts', 'quisk_serial_dsr',
-                    'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec'):
+                    'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec', 'hermes_lite2_enable'):
           setattr(conf, name, x)
           application.ImmediateChange(name)
         elif name[0:4] in ('lin_', 'win_'):
@@ -2022,6 +2223,9 @@ class ControlMixin:
         elif name == "digital_output_level":
           setattr(conf, name, x)
           QS.set_sparams(digital_output_level=x)
+        elif name == "file_play_level":
+          setattr(conf, name, x)
+          QS.set_sparams(file_play_level=x)
         elif name[0:7] == 'hermes_':
           if name == 'hermes_TxLNA_dB':
             application.Hardware.ChangeTxLNA(x)
@@ -3399,14 +3603,20 @@ class RadioSound(BaseWindow):		# The Sound page in the second-level notebook for
     ('', '', '', '', 'digital_rx8_name'),
     ('', '', '', '', 'digital_rx9_name'),
     )
+  hRx0 = "This is almost the same as the radio sound, but it is sent to a digital mode program on a different sound device."\
+" It is analog audio and it is only sent if one of the DGT- modes is selected."\
+" The volume is set by the digital output level instead of the volume control so you can mute the speaker if desired."\
+" It can receive a greater bandwidth than the 3000 Hz limit of SSB."
+  hTx0 = "This is used instead of the microphone when one of the DGT- modes is selected."\
+" The normal speech clipping and filtering is not used for DGT- modes."
   label_help = (	# Same order as sound_names
     (1, "Radio Sound Output",   "This is the radio sound going to the headphones or speakers."),
     (0, "Microphone Input",     "This is the monophonic microphone source.  Set the channel if the source is stereo."),
     (0, "I/Q Rx Sample Input",  "This is the sample source if it comes from a sound device, such as a SoftRock."),
     (1, "I/Q Tx Sample Output", "This is the transmit sample audio sent to a SoftRock."),
     (1, "Raw Digital Output",   "This sends the received I/Q data to another program as stereo."),
-    (0, "Digital Tx0 Input",    "This is the transmit audio coming from a digital mode program."),
+    (0, "Digital Tx0 Input",    hTx0),
-    (1, "Digital Rx0 Output",   "This is the main receiver Rx0 audio going to a digital mode program."),
+    (1, "Digital Rx0 Output",   hRx0),
     (1, "Digital Rx1 Output",   "This is the sub-receiver 1 audio going to a digital mode program."),
     (1, "Digital Rx2 Output",   "This is the sub-receiver 2 audio going to a digital mode program."),
     (1, "Digital Rx3 Output",   "This is the sub-receiver 3 audio going to a digital mode program."),
@@ -3425,13 +3635,13 @@ class RadioSound(BaseWindow):		# The Sound page in the second-level notebook for
     self.radio_dict = local_conf.GetRadioDict(self.radio_name)
     self.num_cols = 8
     for name, text, fmt, help_text, values in local_conf.GetSectionData('Sound'):
-      if name == 'digital_output_level':
+      if name in ('digital_output_level', 'file_play_level'):
         value = self.GetValue(name, self.radio_dict)
         no_edit = "choice" in fmt or fmt == 'boolean'
         txt, cb, btn = self.AddTextComboHelp(1, text, value, values, help_text, no_edit)
         cb.handler = self.OnChange
         cb.quisk_data_name = name
-        break
+        self.NextRow()
     self.NextRow()
     # Add the grid for the sound settings
     sizer = wx.GridBagSizer(2, 2)
@@ -3978,28 +4188,7 @@ class BandPlanDlg(wx.Dialog, ControlMixin):
     if "BandPlanColors" in Settings[4] and "BandPlan" in Settings[4]:
       colors = Settings[4]["BandPlanColors"]
     else:
-      Get = conf.__dict__.get	# Get colors from the user's config file, if any.
+      colors = conf.BandPlanColors
-      dflt = "#555555"
-      colors = [
-        ['CW, General',		Get("CW",	dflt)],
-        ['CW, Extra',		Get("eCW",	dflt)],
-        ['Phone, General',	Get("Phone",	dflt)],
-        ['Phone, Extra',	Get("ePhone",	dflt)],
-        ['AM',			Get("AM",	dflt)],
-        ['Data',		Get("Data",	dflt)],
-        ['DxData',		Get("DxData",	dflt)],
-        ['RTTY',		Get("RTTY",	dflt)],
-        ['SSTV',		Get("SSTV",	dflt)],
-        ['Packet',		Get("Packet",	dflt)],
-        ['Beacons',		Get("Beacons",	dflt)],
-        ['Satellite',		Get("Satellite",dflt)],
-        ['Repeater out',	Get("Repeater",	dflt)],
-        ['Repeater in',		Get("RepInput",	dflt)],
-        ['Simplex',		Get("Simplex",	dflt)],
-        ['Rx only',		Get("RxOnly",	dflt)],
-        ['Special',		Get("Special",	dflt)],
-        ['Other',		Get("Other",	dflt)]
-      ]
     self.modes = []
     self.color_dict = {None:"End"}
     self.mode_dict = {"End":None}
@@ -4206,6 +4395,9 @@ The mode begins at the start frequency and ends at the next frequency.'
       plan.append([hertz, color])
     Settings[4]["BandPlan"] = freq_mode
     application.BandPlan = plan
+    application.BandPlanC2T = {}
+    for mode, color in mode_color:
+      application.BandPlanC2T[color] = mode
     local_conf.settings_changed = True
     self.EndModal(wx.ID_OK)
   def OnCancel(self, event):

docs.html

@@ -836,13 +836,14 @@ by hand if you are a Python expert. Otherwise you can just read the values.
 <br>
 To create a Receive correction point for a given VFO and frequency, attach a signal generator to the SoftRock through an attenuator,
 and look at the image on the graph screen. If the signal is 3500 Hertz above the VFO, the image is 3500 Hertz below it.
-If you don't have a signal generator, find a strong station on the band and look at its image. Minimize the image by adjusting
+Choose "Measure" to measure the corrections and then "Add Cell".
-the amplitude and phase sliders on the adjustment screen, and then press "Save". 
+If you don't have a signal generator, find a strong station on the band and look at its image. Choose "Manual adjustment".
+Minimize the image by adjusting the amplitude and phase sliders on the adjustment screen, and then press "Add cell". 
 <br>
 <br>
 To create a Transmit correction point for a given VFO and frequency, attach the SoftRock RF output to a spectrum analyzer through an attenuator,
 and look at the image. If you don't have a spectrum analyzer use a second receiver tuned to the image. Minimize the image by adjusting
-the amplitude and phase sliders on the adjustment screen, and then press "Save".
+the amplitude and phase sliders on the adjustment screen, and then press "Add cell".
 <br>
 <br>
 </p>
@@ -1470,22 +1471,29 @@ remember the settings.
 <br>
 
 <br>
-If you don't have PulseAudio or don't want to use it, you can use the ALSA loopback device.
+If your digital program only uses Alsa devices or you don't want to use PulseAudio,
-The ALSA loopback device works the same way as the Windows VAC. First
+you can use the ALSA loopback device.
-create the loopback device with the command "modprobe snd-aloop" (you
+It works the same way as the Windows VAC. First create the loopback device with this command:
-will need to be root). You can create the loopback device
+<pre>
-when the system starts, but the way to do that depends on your version of
+sudo modprobe snd-aloop index=19
-Linux. I added snd-aloop to /etc/modules.  You could put the modprobe command in /etc/rc.local instead.
+</pre>
+The "index" is the card number, and it is best to use a number higher than your regular cards.
+The loopback device will be gone on the next restart.
+You can create the loopback device every time the system starts, but the way to do that depends on your version of Linux.
+You could add this line to /etc/modprobe.d/alsa-base.conf:
+<pre>
+options snd-aloop index=19
+</pre>
+Or you could add snd-aloop to /etc/modules or put the modprobe command in /etc/rc.local instead.
 Restart Linux. Now you can enter "cat /proc/asound/cards" to
-print out your sound cards, and you should see a "Loopback" card
+print out your sound cards, and you should see a "Loopback" card listed.
-listed. The cards are also shown on the Quisk Sound
+The Loopback card has one side that connects to Quisk and
-screen. The Loopback card has one side that connects to Quisk and
 another side that connects to your digital program. For the Quisk
-side connect both Digital Input and Digital Output to Loopback,0.
+side connect both Digital Input and Digital Output to the Loopback at hw:19,0.
 Note that the Loopback card is full duplex, and handles both
 input and output. There are actually eight loopbacks created at once,
 but we are only using subdevice 0. For the digital program side, set the input and
-output to "Loopback,1".
+output to the Loopback at hw:19,1.
 Your audio is now connected and you
 should be able to receive digital signals. Be sure to test your
 transmit signal off the air. You may need to reduce power to

microphone.c

@@ -372,7 +372,7 @@ static void process_alc(complex double * cSamples, int count, struct alc * pt, r
 
 static int tx_filter(complex double * filtered, int count)
 {	// Input samples are creal(filtered), output is filtered.  The input rate must be 8000 or 48000 sps.
-	int i, is_ssb;
+	int i, is_ssb, mic_interp;
 	int sample_rate = 8000;
 	double dsample, dtmp, magn;
 	complex double csample;
@@ -423,9 +423,10 @@ static int tx_filter(complex double * filtered, int count)
 		}
 		return 0;
 	}
+	mic_interp = MIC_OUT_RATE / sample_rate;
 	// check size of dsamples[] and csamples[] buffer
 	if (count > samples_size) {
-		samples_size = count * 2;
+		samples_size = count * 2 * mic_interp;
 		if (dsamples)
 			free(dsamples);
 		if (csamples)
@@ -541,8 +542,8 @@ static int tx_filter(complex double * filtered, int count)
 		// remove clipping distortion
 		count = quisk_cDecimate(csamples, count, &cfiltAudio3, 1);
 		// Interpolate up to 48000
-		if (MIC_OUT_RATE != sample_rate)
+		if (mic_interp != 1)
-			count = quisk_cInterpolate(csamples, count, &cfiltInterp, MIC_OUT_RATE / sample_rate);
+			count = quisk_cInterpolate(csamples, count, &cfiltInterp, mic_interp);
 		// convert back to 16 bits
 		for (i = 0; i < count; i++) {
 			filtered[i] = csamples[i] * CLIP16;
@@ -573,8 +574,8 @@ static int tx_filter(complex double * filtered, int count)
 		// remove clipping distortion
 		count = quisk_dFilter(dsamples, count, &dfiltAudio3);
 		// Interpolate up to 48000
-		if (MIC_OUT_RATE != sample_rate)
+		if (mic_interp != 1)
-			count = quisk_dInterpolate(dsamples, count, &dfiltInterp, MIC_OUT_RATE / sample_rate);
+			count = quisk_dInterpolate(dsamples, count, &dfiltInterp, mic_interp);
 		// convert back to 16 bits
 		for (i = 0; i < count; i++) {
 			filtered[i] = dsamples[i] * CLIP16;

quisk.c

@@ -152,9 +152,14 @@ static int quisk_use_sidetone;		// is there a sidetone volume control?
 static int hl2_txbuf_errors;		// errors in the Hermes-Lite2 Tx buffer
 static int hl2_txbuf_state;		// state machine for errors in the Hermes-Lite2 Tx buffer
 static int freedv_monitor;		// pass the Freedv audio to the speakers instead of to the demodulator
+static int softrock_correct_freq;	// gain and phase corrections for SoftRock
+static double softrock_correct_gain;
+static double softrock_correct_phase;
+static int softrock_correct_active;	// 0 No correction adjustment; 1 Manual adjustment; 2 Calculate Rx corrections
 
 static complex double PySampleBuf[SAMP_BUFFER_SIZE];	// buffer for samples returned from Python
 static int PySampleCount;				// count of samples in buffer
+static bool quisk_tx_inhibit;
 
 static int multirx_data_width;			// width of graph data to return
 static int multirx_fft_width;			// size of FFT samples
@@ -2741,7 +2746,7 @@ int quisk_process_samples(complex double * cSamples, int nSamples)
 				multirx_cSamples[0][i] = dsamples2[i] + I * dsamples2[i];
 			process_agc(&Agc3, multirx_cSamples[0], n, 0);
 		}
-		play_sound_interface(quiskPlaybackDevices[QUISK_INDEX_SUB_RX1], n, multirx_cSamples[0], 1, 1.0);
+		play_sound_interface(quiskPlaybackDevices[QUISK_INDEX_SUB_RX1], n, multirx_cSamples[0], 1, digital_output_level);
 	}
 
 	// Perhaps decimate by an additional fraction
@@ -3156,6 +3161,10 @@ static PyObject * get_params(PyObject * self, PyObject * args)
 		return PyInt_FromLong(quisk_serial_ptt);
 	if (strcmp(name, "hl2_txbuf_errors") == 0)
 		return PyInt_FromLong(hl2_txbuf_errors);
+	if (strcmp(name, "softrock_correct_active") == 0)
+		return PyInt_FromLong((long)softrock_correct_active);
+	if (strcmp(name, "quisk_tx_inhibit") == 0)
+		return PyInt_FromLong((long)quisk_tx_inhibit);
 	Py_INCREF (Py_None);
 	return Py_None;
 }
@@ -3759,6 +3768,7 @@ static int read_rx_udp10(complex double * samp)	// Read samples from UDP using t
 				//code_version = quisk_hermes_to_pc[3];
 				if ((quisk_hermes_to_pc[0] & 0x01) != 0)	// C1
 					quisk_sound_state.overrange++;
+				quisk_tx_inhibit = (quisk_hermes_to_pc[0] & 0x02) == 0;	// should limit to Hermes Lite2 only
 				hardware_ptt = buf[start] & 0x01;	// C0 bit zero is PTT
 				quisk_hardware_cwkey = (buf[start] & 0x04) >> 2;	// C0 bit two is CW key state
 				switch (hl2_txbuf_state) {
@@ -3870,6 +3880,10 @@ static int read_rx_udp17(complex double * cSamples0)	// Read samples from UDP
 	fft_data * ptFFT;
 	fd_set fds;
 	static int block_number=0;
+	static complex double dc_average = 0;		// Average DC component in samples
+	static complex double dc_sum = 0;
+	static int dc_count = 0;
+	static time_t time0 = 0;
 	// Data from the receiver is little-endian
 
 	if ( ! rx_udp_gain_correct) {	// correct for second stage CIC decimation JIM JIM
@@ -3975,6 +3989,16 @@ static int read_rx_udp17(complex double * cSamples0)	// Read samples from UDP
 			if (xr & 0x100) {		// channel 1
 				if (quisk_invert_spectrum)		// Invert spectrum
 					sample = conj(sample);
+				// correct the DC level
+				dc_sum += sample;
+				dc_count++;
+				sample -= dc_average;
+				if (dc_count >= 48000 && time(NULL) != time0) {
+					time0 = time(NULL);
+					dc_average = dc_sum / dc_count;
+					dc_sum = dc_count = 0;
+					//printf ("New DC average %.0lf\n", cabs(dc_average));
+				}
 				// Put samples into the fft input array.
 				ptFFT = fft_data_array + fft_data_index;
 				if ( ! (xi & 0x100)) {		// zero marker for start of first block
@@ -4242,6 +4266,13 @@ static PyObject * change_scan(PyObject * self, PyObject * args)	// Called from G
 	return Py_None;
 }
 
+static PyObject * softrock_corrections(PyObject * self, PyObject * args)	// Called from GUI thread
+{
+	if (!PyArg_ParseTuple (args, "i", &softrock_correct_active))
+		return NULL;
+	return Py_BuildValue("idd", softrock_correct_freq, softrock_correct_gain, softrock_correct_phase);
+}
+
 static PyObject * change_rates(PyObject * self, PyObject * args)	// Called from GUI thread
 {	// Change to new sample rates
 
@@ -5029,6 +5060,79 @@ static PyObject * get_bandscope(PyObject * self, PyObject * args)	// Called by t
 	return Py_None;
 }
 
+static void softrock_correct_fft(fft_data * ptFft, int fixit)
+{ // See i/Q balance in Rocky: https://www.dxatlas.com/Rocky/Advanced.asp
+	double ampl, r1, r2, i1, i2, Zr, Zi, Pwr, Gain, Phase, OutR, OutI, S1R, S1I, S2R, S2I;
+	static double tot_ga=0, tot_ph=0;
+	static int count=0;
+	double maxa = 0;
+	int i, maxi = 0, freq;
+	double complex Z, s1, s2, Hr, Hi, S1, S2;
+	double tim;
+	static double time0 = 0;
+
+	for (i = 0; i < fft_size; i++) {
+		ampl = cabs(ptFft->samples[i]);
+		if (ampl > maxa) {
+			maxa = ampl;
+			maxi = i;
+		}
+	}
+	if (maxi < fft_size / 2)
+		freq = maxi;
+	else
+		freq = maxi - fft_size;
+	freq = freq * fft_sample_rate / fft_size;
+	s1 = ptFft->samples[maxi];
+	s2 = ptFft->samples[fft_size - maxi];
+	Z = s1 * s2;
+	r1 = creal(s1);
+	r2 = creal(s2);
+	i1 = cimag(s1);
+	i2 = cimag(s2);
+	Pwr = r1 * r1 + i1 * i1 + r2 * r2 + i2 * i2;
+	Zr = creal(Z) / Pwr;
+	Zi = cimag(Z) / Pwr;
+	Gain = sqrt((1.0 + 2 * Zr) / (1.0 - 2 * Zr));
+	Phase = asin(Zi * (Gain * Gain + 1.0) / Gain);
+	tot_ga += Gain;
+	tot_ph += Phase;
+	count += 1;
+	tim = QuiskTimeSec();
+	if (tim - time0 >= 0.5) {
+		time0 = tim;
+		softrock_correct_freq = freq;
+		softrock_correct_gain = tot_ga / count;
+		softrock_correct_phase = tot_ph / count;
+		//if (softrock_correct_active)
+		//	printf("Freq domain Gain %10.7lf, Phase %10.7lf, %10.7lf, freq %d\n",
+		//		softrock_correct_gain, softrock_correct_phase, softrock_correct_phase * 57.29578, freq);
+		tot_ga = tot_ph = count = 0;
+	}
+	if (fixit) {
+		Hr = softrock_correct_gain * cos(softrock_correct_phase);
+		Hi = softrock_correct_gain * sin(softrock_correct_phase);
+		for (i = 1; i < fft_size / 2; i++) {
+			S1 = ptFft->samples[fft_size - i];
+			S2 = ptFft->samples[i];
+			S1R = creal(S1);
+			S1I = cimag(S1);
+			S2R = creal(S2);
+			S2I = cimag(S2);
+			OutR = S2R + S1R - (S2I + S1I) * Hi + (S2R - S1R) * Hr;
+			OutI = S2I - S1I + (S2I + S1I) * Hr + (S2R - S1R) * Hi;
+			ptFft->samples[i] = OutR + I * OutI;
+			S1R = creal(S2);
+			S1I = cimag(S2);
+			S2R = creal(S1);
+			S2I = cimag(S1);
+			OutR = S2R + S1R - (S2I + S1I) * Hi + (S2R - S1R) * Hr;
+			OutI = S2I - S1I + (S2I + S1I) * Hr + (S2R - S1R) * Hi;
+			ptFft->samples[fft_size - i] = OutR + I * OutI;
+		}
+	}
+}
+
 static PyObject * get_graph(PyObject * self, PyObject * args)	// Called by the GUI thread
 {
 	int i, j, k, m, n, index, ffts, ii, mm, m0, deltam;
@@ -5102,6 +5206,8 @@ static PyObject * get_graph(PyObject * self, PyObject * args)	// Called by the G
 		for (i = 0; i < fft_size; i++)		// multiply by window
 			ptFft->samples[i] *= fft_window[i];
 		fftw_execute_dft(quisk_fft_plan, ptFft->samples, ptFft->samples);	// Calculate FFT
+		if (softrock_correct_active == 2)
+			softrock_correct_fft(ptFft, 0);
 		// Create RMS s-meter value at known bandwidth
 		// The pass band is (rx_tune_freq + filter_start_offset) to += bandwidth
 		// d1 is the tune frequency
@@ -5152,6 +5258,9 @@ static PyObject * get_graph(PyObject * self, PyObject * args)	// Called by the G
 			//QuiskPrintf(" %d %.4lf At %5d to %5d place %5d to %5d for block %d\n", fft_size, scan_valid, mm, m, ii, i, ptFft->block);
 		}
 		else {
+			// Zero frequency is at index fft_size / 2.
+			// There are fft_size/2 positive frequencies and fft_size/2-1 negative frequencies.
+			// The frequency at index k and (fft_size - k) are equal except for sign.
 			count_fft++;
 			k = 0;
 			for (i = fft_size / 2; i < fft_size; i++)			// Negative frequencies
@@ -5977,6 +6086,7 @@ static PyMethodDef QuiskMethods[] = {
 	{"get_filter_rate", get_filter_rate, METH_VARARGS, "Return the sample rate used for the filters."},
 	{"get_tx_filter", quisk_get_tx_filter, METH_VARARGS, "Return the frequency response of the transmit filter."},
 	{"get_audio_graph", get_audio_graph, METH_VARARGS, "Return a tuple of the audio graph data."},
+	{"softrock_corrections", softrock_corrections, METH_VARARGS, "Control and return SoftRock amplitude and phase corrections."},
 	{"measure_frequency", measure_frequency, METH_VARARGS, "Set the method, return the measured frequency."},
 	{"measure_audio", measure_audio, METH_VARARGS, "Set the method, return the measured audio voltage."},
 	{"get_overrange", get_overrange, METH_VARARGS, "Return the count of overrange (clip) for the ADC."},

quisk.h

@@ -320,6 +320,7 @@ extern int quisk_start_cw_delay;		// milliseconds to delay output on serial or M
 extern int quisk_start_ssb_delay;		// milliseconds to discard output for all modes except CW
 extern struct sound_dev * quiskPlaybackDevices[];	// array of Playback sound devices
 extern int quisk_close_file_play;
+extern double digital_output_level;
 
 extern PyObject * quisk_set_spot_level(PyObject * , PyObject *);
 extern PyObject * quisk_get_tx_filter(PyObject * , PyObject *);

quisk.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python3
 
-# All QUISK software is Copyright (C) 2006-2021 by James C. Ahlstrom.
+# All QUISK software is Copyright (C) 2006-2024 by James C. Ahlstrom.
 # This free software is licensed for use under the GNU General Public
 # License (GPL), see http://www.opensource.org.
 # Note that there is NO WARRANTY AT ALL.  USE AT YOUR OWN RISK!!
@@ -658,6 +658,16 @@ class HamlibHandlerSerial:
       self.app.pttButton.SetValue(0, True)
     else:
       self.Error(cmd, data)
+  def ZZSM(self, cmd, data, length):	# return the S-meter value in dB * 2; 0 to 260
+    if length == 0:			# 0 to 260 is -140 to -10 dB; S9 == -73 dB == 134; dB = ZZSM / 2 - 140
+      i = round((self.app.hamlib_strength + 67) * 2)
+      if i < 0:
+        i = 0
+      elif i > 260:
+        i = 260
+      self.Write('%s%03d;' % (cmd, i))
+    else:
+      self.Error(cmd, data)
   def ZZSP(self, cmd, data, length):	# the split status
     if length == 0:
       if self.app.split_rxtx:
@@ -1151,7 +1161,7 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
   def GetLevel(self):
     name = self.GetParamName()
     if name == '?':	# send back supported parameters
-      self.Reply2('AGC AF', 0)
+      self.Reply2('AGC AF STRENGTH', 0)
     elif name == 'AGC':
       if self.app.BtnAGC.GetValue():
         self.Reply2(4, 0)
@@ -1160,6 +1170,9 @@ class HamlibHandlerRig2:	# Test with telnet localhost 4532
     elif name == 'AF':
       x = self.app.audio_volume	# audio_volume is 0 to 1.000
       self.Reply2("%.5f" % x, 0)
+    elif name == 'STRENGTH':
+      i = round(self.app.hamlib_strength)
+      self.Reply2(i, 0)
     else:
       self.ErrParam()
   def SetLevel(self):
@@ -1762,6 +1775,12 @@ class GraphDisplay(wx.Window):
       dc.SetTextForeground(conf.color_graph_msg_fg)
       dc.SetBackgroundMode(wx.SOLID)
       dc.DrawText(self.display_text, 0, 0)
+    if application.tx_inhibit:
+      dc.SetFont(self.font)
+      dc.SetTextBackground(conf.color_graph_msg_bg)
+      dc.SetTextForeground("red")
+      dc.SetBackgroundMode(wx.SOLID)
+      dc.DrawText(" *** Tx Inhibit ***", 0, self.chary * 15 // 10)
   def DrawFilter(self, dc):
     dc.SetPen(wx.TRANSPARENT_PEN)
     dc.SetLogicalFunction(wx.COPY)
@@ -1873,6 +1892,12 @@ class GraphScreen(wx.Window):
     self.Bind(wx.EVT_LEFT_UP, self.OnLeftUp)
     self.Bind(wx.EVT_MOTION, self.OnMotion)
     self.Bind(wx.EVT_MOUSEWHEEL, self.OnWheel)
+    # handle bandplan info
+    self.bandplanWindow = wx.PopupWindow (parent)
+    self.bandplanInfo = wx.TextCtrl(self.bandplanWindow, style=wx.TE_READONLY)
+    self.bandplanInfo.SetFont(wx.Font(conf.status_font_size, wx.FONTFAMILY_SWISS, wx.NORMAL,
+        wx.FONTWEIGHT_NORMAL, False, conf.quisk_typeface))
+    self.bandplanWindow.Hide(); 
     self.MakeDisplay()
   def MakeDisplay(self):
     self.display = GraphDisplay(self, self.originX, 0, self.graph_width, 5, self.chary)
@@ -2224,6 +2249,44 @@ class GraphScreen(wx.Window):
           self.ChangeHwFrequency(self.txFreq, self.VFO, 'MouseMotion', event=event, rx_freq=freq2)
         else:					# Mouse motion changes the transmit frequency
           self.ChangeHwFrequency(self.txFreq + freq, self.VFO, 'MouseMotion', event=event)
+    else:
+      mouse_x, mouse_y = self.GetMousePosition(event)
+      if not self.in_splitter and self.originY <= mouse_y <= self.originY + self.tick and (
+            self.originX <= mouse_x <= self.originX + self.graph_width):
+        #sample_rate = int(self.sample_rate * self.zoom)	# Measure the frequency
+        #freq = float(mouse_x - self.x0) * sample_rate / self.data_width + self.zoom_deltaf + self.VFO
+        #freq = int(freq)
+        #color = None
+        #for start_freq, start_color in application.BandPlan:
+        #  if start_freq >= freq:
+        #    break
+        #  color = start_color
+        dc = wx.ClientDC(self)	# Read the pixel at the mouse position
+        pixel = dc.GetPixel(mouse_x, mouse_y)
+        pixel = "#%02X%02X%02X" % (pixel[0], pixel[1], pixel[2])
+        txt = application.BandPlanC2T.get(pixel, '')
+        if pixel == "#000000":
+          pass
+        elif txt:
+          self.bandplanInfo.Clear()
+          self.bandplanInfo.write(txt)
+          width, height = self.bandplanInfo.GetTextExtent(txt)
+          width += self.bandplanInfo.GetCharWidth() * 2
+          height += self.bandplanInfo.GetCharHeight() // 2
+          self.bandplanInfo.SetSize(wx.Size(width, height))
+          self.bandplanWindow.SetClientSize((width, height))
+          rect = self.GetScreenRect()
+          if mouse_x > self.originX + self.graph_width * 3 // 4:
+            self.bandplanWindow.Move(mouse_x + rect.GetX() - width, mouse_y + rect.GetY() - height * 12 // 10)
+          else:
+            self.bandplanWindow.Move(mouse_x + rect.GetX(), mouse_y + rect.GetY() - height * 12 // 10)
+          if not self.bandplanWindow.IsShown():
+            self.bandplanWindow.Show()
+        else:
+          if self.bandplanWindow.IsShown():
+            self.bandplanWindow.Hide()
+      elif self.bandplanWindow.IsShown():
+        self.bandplanWindow.Hide()
   def OnWheel(self, event):
     if conf.freq_spacing:
       wm = conf.freq_spacing
@@ -3497,6 +3560,8 @@ class App(wx.App):
     self.midi_message = []
     self.idName2Button = {}
     self.midi_handler = None
+    self.tx_inhibit = 0
+    self.old_tx_inhibit = 0
     if conf.use_rx_udp == 10:		# Hermes UDP protocol
       self.bandscope_clock = conf.rx_udp_clock
     else:
@@ -3557,12 +3622,13 @@ class App(wx.App):
     self.smeter_avg_seconds = 1.0	# seconds for S-meter average
     self.smeter_sunits = -87.0
     self.smeter_usage = "smeter"	# specify use of s-meter display
+    self.hamlib_strength = 0.0;
     self.timer = time.time()		# A seconds clock
     self.heart_time0 = self.timer	# timer to call HeartBeat at intervals
     self.save_time0 = self.timer
     self.smeter_db_time0 = self.timer
     self.smeter_sunits_time0 = self.timer
-    self.fewsec_time0 = self.timer
+    self.slowheart_time0 = self.timer
     self.multi_rx_index = 0
     self.multi_rx_timer = self.timer
     self.band_up_down = 0			# Are band Up/Down buttons in use?
@@ -3718,6 +3784,7 @@ class App(wx.App):
         pass #traceback.print_exc()
     if "Version" not in self.bandAmplPhase:
       self.FixAmplPhase()		# Convert to new format Oct 2020
+    self.FixAmplPhase2()		# New logic June 2024
     if Hardware.VarDecimGetChoices():	# Hardware can change the decimation.
       self.sample_rate = Hardware.VarDecimSet()	# Get the sample rate.
       self.vardecim_set = self.sample_rate
@@ -4384,6 +4451,25 @@ class App(wx.App):
       except:
         traceback.print_exc()
         self.bandAmplPhase[band] = {}
+  def FixAmplPhase2(self):	# New definition of phase
+    if self.bandAmplPhase["Version"]["rx"] == [1]:
+      return
+    degrad = 360.0 / 2 / math.pi
+    for band in self.bandAmplPhase:
+      if band == "Version":
+        continue
+      for rx_tx in self.bandAmplPhase[band]:
+        if rx_tx in ('rx', 'tx'):
+          data = self.bandAmplPhase[band][rx_tx]
+          for item in data:
+            vfo = item[0]
+            lst_framph = item[1]
+            for framph in lst_framph:
+              freq, am, ph = framph
+              p = math.atan(math.tan(ph / degrad) / (1.0 + am))
+              #print ("%5s %3s %8d %8d %8.4f %8.3f %8.3f" % (band, rx_tx, vfo, freq, am, ph, p * degrad))
+              framph[2] = p * degrad
+    self.bandAmplPhase["Version"]["rx"] = [1]
   def ImmediateChange(self, name):
     if name == "pulse_audio_verbose_output":
       value = getattr(conf, name)
@@ -5035,6 +5121,7 @@ class App(wx.App):
     self.smeter_sunits_time0 = self.timer
     s = self.smeter_sunits / 6.0	# change to S units; 6db per S unit
     s += Hardware.correct_smeter	# S-meter correction for the gain, band, etc.
+    self.hamlib_strength = (s - 9.0) * 6.0	# convert to dB; 0 dB is S9
     if s < 0:
       s = 0
     if s >= 9.5:
@@ -5816,10 +5903,8 @@ class App(wx.App):
       self.graph.SetVFO(vfo)
       self.waterfall.SetVFO(vfo)
       self.station_screen.Refresh()
-      if self.w_phase:
-        self.w_phase.Redraw()
     if change:
-      if conf.name_of_sound_capt or conf.name_of_mic_play:
+      if (conf.name_of_sound_capt or conf.name_of_mic_play) and QS.get_params("softrock_correct_active") == 0:
         ampl, phase = self.GetAmplPhase('rx')
         QS.set_ampl_phase(ampl, phase, 0)
         ampl, phase = self.GetAmplPhase('tx')
@@ -6370,7 +6455,7 @@ class App(wx.App):
         Hardware.RepeaterOffset(0)
         QS.set_ctcss(0)
         QS.tx_hold_state(1)
-    if QS.is_key_down():	# Tx indicator
+    if QS.is_key_down() and not self.tx_inhibit:	# Tx indicator
       if not self.tx_indicator:
         self.tx_indicator = True
         self.pttButton.Tx.TurnOn(True)
@@ -6431,6 +6516,8 @@ class App(wx.App):
             self.hot_key_ptt_active = False
         self.hot_key_ptt_was_down = self.hot_key_ptt_is_down
         self.hot_key_ptt_pressed = False
+      if self.tx_inhibit:
+        ptt = False
       if ptt is True and not ptt_button_down:
         self.SetPTT(True)
       elif ptt is False and ptt_button_down:
@@ -6501,6 +6588,16 @@ class App(wx.App):
     if self.timer - self.heart_time0 > 0.10:	# call hardware to perform background tasks:
       self.heart_time0 = self.timer
       Hardware.HeartBeat()
+      if conf.hermes_lite2_enable:
+        self.tx_inhibit = QS.get_params('quisk_tx_inhibit')
+      else:
+        self.tx_inhibit = 0
+      if self.tx_inhibit != self.old_tx_inhibit:
+        self.old_tx_inhibit = self.tx_inhibit
+        self.graph.display.Refresh()
+        self.waterfall.pane1.display.Refresh()
+      if self.tx_inhibit and self.spotButton.GetValue():
+        self.spotButton.SetValue(0, True)
       msg = QS.GetQuiskPrintf()
       if msg:
         print(msg, end='')
@@ -6519,9 +6616,10 @@ class App(wx.App):
           self.ChangeDisplayFrequency(tune - vfo, vfo)
         self.FldigiPoll()
         self.HamlibPoll()
-      #if self.timer - self.fewsec_time0 > 3.0:
+      if self.timer - self.slowheart_time0 > 0.5:
-      #  self.fewsec_time0 = self.timer
+        self.slowheart_time0 = self.timer
-      #  print ('fewswc')
+        if self.w_phase:
+          self.w_phase.SlowHeartBeat()
       if self.timer - self.save_time0 > 20.0:
         self.save_time0 = self.timer
         if self.CheckState():

quisk_conf_defaults.py

@@ -473,6 +473,13 @@ hermes_iob_rxin = 'J10 available'
 #hermes_iob_rxin = 'HL2 Rx to J9'
 #hermes_iob_rxin = 'Use J9 and J10'
 
+## hermes_lite2_enable			Hermes Lite2 protocol, boolean
+# This turns on some of the protocol extensions for the Hermes Lite2 that are not part
+# of the official Hermes Protocol 1. Currently this only enables Tx Inhibit (CN8).
+# Changes are immediate (no need to restart).
+hermes_lite2_enable = True
+#hermes_lite2_enable = False
+
 
 # These are known power meter calibration tables. This table is not present in the JSON settings file.
 power_meter_std_calibrations = {}
@@ -1077,7 +1084,15 @@ digital_rx1_name = ""
 ## digital_output_level		Digital output level, number
 # This is the volume control 0.0 to 1.0 for digital playback to fldigi, etc.
 # Changes are immediate (no need to restart).
-digital_output_level = 0.7
+digital_output_level = 0.700
+
+## file_play_level		File play level, number
+# Use this to reduce the volume when playing files. For example, if the volume of the CQ
+# message is too loud, reduce the level relative to radio sound.
+# Changes are immediate (no need to restart).
+file_play_level = 1.000
+#file_play_level = 0.500
+#file_play_level = 0.100
 
 # Sound card names:
 #
@@ -2096,6 +2111,26 @@ RxOnly	= '#AAAAAA'
 # Colors start at the indicated frequency and continue until the
 # next frequency.  The special color "None" turns off color.
 #
+BandPlanColors = [	# Display name and corresponding color
+  ['CW, General',	CW],
+  ['CW, Extra',		eCW],
+  ['Phone, General',	Phone],
+  ['Phone, Extra',	ePhone],
+  ['AM',		AM],
+  ['Data',		Data],
+  ['DxData',		DxData],
+  ['RTTY',		RTTY],
+  ['SSTV',		SSTV],
+  ['Packet',		Packet],
+  ['Beacons',		Beacons],
+  ['Satellite',		Satellite],
+  ['Repeater out',	Repeater],
+  ['Repeater in',	RepInput],
+  ['Simplex',		Simplex],
+  ['Rx only',		RxOnly],
+  ['Special',		Special],
+  ['Other',		Other]
+]
 
 
 

setup.py

@@ -7,7 +7,7 @@ import os
 # You must define the version here.  A title string including
 # the version will be written to __init__.py and read by quisk.py.
 
-Version = '4.2.30'
+Version = '4.2.35'
 
 fp = open("__init__.py", "w")	# write title string
 fp.write("#Quisk version %s\n" % Version)
@@ -39,8 +39,10 @@ if sys.platform == "darwin":	# Build for Macintosh
   libraries = ['portaudio', 'fftw3', 'm']
   if os.path.isdir('/opt/local/include'):	# MacPorts
     base_dir = '/opt/local'
-  elif os.path.isdir('/usr/local/include'):	# HomeBrew
+  elif os.path.isdir('/usr/local/include'):	# HomeBrew on macOS Intel 
     base_dir = '/usr/local'
+  elif os.path.isdir('/opt/homebrew/include'): # HomeBrew on Apple Silicon
+    base_dir = '/opt/homebrew'
   else:						# Regular build?
     base_dir = '/usr'
   if os.path.isfile(base_dir + "/include/pulse/pulseaudio.h"):

sound.c

@@ -85,7 +85,8 @@ char * sound_format_names[4] = {"Int32", "Int16", "Float32", "Int24"} ;
 static struct wav_file file_rec_audio, file_rec_samples, file_rec_mic;
 static int close_file_rec;
 
-static double digital_output_level = 0.7;
+double digital_output_level = 0.7;
+static double file_play_level = 1.0;
 static int dc_remove_bw=100;			// bandwidth of DC removal filter
 
 static ty_sample_start pt_sample_start;
@@ -175,9 +176,10 @@ static void correct_sample (struct sound_dev * dev, complex double * cSamples, i
 		for (i = 0; i < nSamples; i++) {
 			re = creal(cSamples[i]);
 			im = cimag(cSamples[i]);
-			re = re * dev->AmPhAAAA;
+			cSamples[i] = re * dev->AmPhAAAA + I * (re * dev->AmPhCCCC + im * dev->AmPhDDDD);
-			im = re * dev->AmPhCCCC + im * dev->AmPhDDDD;
+			//re = re * dev->AmPhAAAA;
-			cSamples[i] = re + I * im;
+			//im = re * dev->AmPhCCCC + im * dev->AmPhDDDD;
+			//cSamples[i] = re + I * im;
 		}
 	}
 }
@@ -730,8 +732,11 @@ void * quisk_make_txIQ(struct sound_dev * dev, int rewind)
 	}
 	// amplitude and phase corrections
 	if (dev->doAmplPhase) {
-		dSamp0 = dSamp0 * dev->AmPhAAAA;
+		//dSamp0 = dSamp0 * dev->AmPhAAAA;
-		dSamp1 = dSamp0 * dev->AmPhCCCC + dSamp1 * dev->AmPhDDDD;
+		//dSamp1 = dSamp0 * dev->AmPhCCCC + dSamp1 * dev->AmPhDDDD;
+		d = dSamp0;
+		dSamp0 = d * dev->AmPhAAAA;
+		dSamp1 = d * dev->AmPhCCCC + dSamp1 * dev->AmPhDDDD;
 	}
 	switch (dev->sound_format) {
 	case Int16:
@@ -836,6 +841,34 @@ int quisk_play_sidetone(struct sound_dev * dev)
 	return 0;
 }
 
+#if 0
+static void testing(double complex * cSamples, int nSamples)
+{
+	int i;
+	static double AvgR=0, AvgQ=0, AvgRQ=0;
+	double d, p, Gain, Phase;
+	time_t tim;
+	static time_t time0;
+
+	for (i = 0; i < nSamples; i++) {
+		d = creal(cSamples[i]);
+		AvgR += d * d;
+		p = cimag(cSamples[i]);
+		AvgQ += p * p;
+		AvgRQ += d * p;
+	}
+	tim = time(NULL);
+	if (tim - time0 >= 2) {
+		time0 = tim;
+		Gain = sqrt(AvgR / AvgQ);
+		Phase = AvgRQ / AvgQ / Gain;
+		Phase = asin(Phase);
+		printf("Time domain Gain %10.7lf, Phase %10.7lf, %10.7lf degrees\n", Gain, Phase, Phase * 57.29578);
+		AvgR = AvgQ = AvgRQ = 0;
+	}
+}
+#endif
+
 int quisk_read_sound(void)	// Called from sound thread
 {  // called in an infinite loop by the main program
 	int i, nSamples, mic_count, mic_interp, retval, is_cw, mic_sample_rate;
@@ -913,9 +946,10 @@ int quisk_read_sound(void)	// Called from sound thread
 	//QuiskPrintTime("quisk_read_sound end", 0);
 		if (Capture.channel_Delay >= 0)	// delay the I or Q channel by one sample
 			delay_sample(&Capture, (double *)cSamples, nSamples);
+		DCremove(cSamples, nSamples, quisk_sound_state.sample_rate, key_state);
+		//testing(cSamples, nSamples);
 		if (Capture.doAmplPhase)		// amplitude and phase corrections
 			correct_sample(&Capture, cSamples, nSamples);
-		DCremove(cSamples, nSamples, quisk_sound_state.sample_rate, key_state);
 		if (nSamples <= 0)
 			QuiskSleepMicrosec(2000);
 #if DEBUG_IO > 1
@@ -969,7 +1003,7 @@ int quisk_read_sound(void)	// Called from sound thread
 	if (quisk_record_state == TMP_PLAY_SPKR_MIC)
 		quisk_tmp_playback(cSamples, nSamples, 1.0);		// replace radio sound
 	else if (quisk_record_state == FILE_PLAY_SPKR_MIC)
-		quisk_file_playback(cSamples, nSamples, 1.0);		// replace radio sound
+		quisk_file_playback(cSamples, nSamples, file_play_level);		// replace radio sound
 	// Play the demodulated audio
 #if DEBUG_MIC != 2
 	if ( ! quisk_play_sidetone(&quisk_Playback))	// play sidetone
@@ -1401,6 +1435,8 @@ void quisk_open_sound(void)	// Called from GUI thread
 	RawSamplePlayback.channel_I = 0;
 	RawSamplePlayback.channel_Q = 1;
 
+	file_play_level = QuiskGetConfigDouble("file_play_level", 1.0);
+
 	set_num_channels (&Capture);
 	set_num_channels (&quisk_Playback);
 	set_num_channels (&MicCapture);
@@ -1565,10 +1601,10 @@ PyObject * quisk_micplay_channels(PyObject * self, PyObject * args)	// Called fr
 PyObject * quisk_set_sparams(PyObject * self, PyObject * args, PyObject * keywds)
 {  /* Call with keyword arguments ONLY; change local parameters */
 	static char * kwlist[] = {"dc_remove_bw", "digital_output_level", "remote_control_slave", "remote_control_head",
-		NULL} ;
+		"file_play_level", NULL} ;
 
-	if (!PyArg_ParseTupleAndKeywords (args, keywds, "|idii", kwlist, &dc_remove_bw, &digital_output_level,
+	if (!PyArg_ParseTupleAndKeywords (args, keywds, "|idiid", kwlist, &dc_remove_bw, &digital_output_level,
-	&remote_control_slave, &remote_control_head))
+	&remote_control_slave, &remote_control_head, &file_play_level))
 		return NULL;
 	Py_INCREF (Py_None);
 	return Py_None;

sound_alsa.c

@@ -495,8 +495,37 @@ static snd_pcm_format_t check_formats(struct sound_dev * dev, snd_pcm_hw_params_
 {
 	snd_pcm_format_t format = SND_PCM_FORMAT_UNKNOWN;
 	dev->sample_bytes = 0;
-
+#if 0
+	char * card_name;
+	int card;
+	snd_pcm_info_t * pcm_info;
+	printf("driver %s\n", snd_ctl_card_info_get_driver(info));
+	int loopback = 0;
+	if (snd_pcm_info_malloc(&pcm_info) == 0) {
+		if (snd_pcm_info (dev->handle, pcm_info) == 0) {
+			card = snd_pcm_info_get_card (pcm_info);
+			if (card >= 0) {
+				if (snd_card_get_name(card, &card_name) == 0) {
+					if (strcmp(card_name, "Loopback") == 0)
+						loopback = 1;
+					printf("name %s\n", card_name);
+					free(card_name);
+				}
+			}
+		}
+		snd_pcm_info_free(pcm_info);
+	}
+#endif
 	strMcpy (dev->msg1, "Available formats: ", QUISK_SC_SIZE);
+	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S16) == 0) {
+		if (!dev->sample_bytes) {
+			strncat(dev->msg1, "*", QUISK_SC_SIZE);
+			dev->sample_bytes = 2;
+			dev->sound_format = Int16;
+			format = SND_PCM_FORMAT_S16;
+		}
+		strncat(dev->msg1, "S16 ", QUISK_SC_SIZE);
+	}
 	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S32) == 0) {
 		if (!dev->sample_bytes) {
 			strncat(dev->msg1, "*", QUISK_SC_SIZE);
@@ -515,15 +544,6 @@ static snd_pcm_format_t check_formats(struct sound_dev * dev, snd_pcm_hw_params_
 	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_U24) == 0) {
 		strncat(dev->msg1, "U24 ", QUISK_SC_SIZE);
 	}
-	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S16) == 0) {
-		if (!dev->sample_bytes) {
-			strncat(dev->msg1, "*", QUISK_SC_SIZE);
-			dev->sample_bytes = 2;
-			dev->sound_format = Int16;
-			format = SND_PCM_FORMAT_S16;
-		}
-		strncat(dev->msg1, "S16 ", QUISK_SC_SIZE);
-	}
 	if (snd_pcm_hw_params_test_format (dev->handle, hware, SND_PCM_FORMAT_S24_3LE) == 0) {
 		if (!dev->sample_bytes) {
 			strncat(dev->msg1, "*", QUISK_SC_SIZE);