Quisk version 4.2.49

CHANGELOG.txt

@@ -1,3 +1,25 @@
+Quisk Version 4.2.49  December 2025
+===================================
+This version adds more features for the Anan 10E and other OpenHPSDR radios. Please test.
+
+I added the forward power, SWR, temperature and PA current display to the OpenHPSDR radio. But
+I don't have that radio so I need some help. I think the forward and reverse power connections
+are correct, but it is still necessary to create a table to convert analog input codes to power.
+Go to the Hardware screen and check the "Power meter calibration" setting. You will need to enter
+"New" and create a suitable table. To see the ADC values, choose table "Show ADC".
+
+There is no protocol standard to specify which analog input is used for temperature and PA current.
+And AFAIK the Anan 10E has no such sensors. I am hoping to use the board ID to find the right input.
+The ADC conversion is linear and the two points are specified on the Hardware screen.
+
+I currently assigned the analog inputs as follows:
+AIN1	Forward power
+AIN2	Reverse power
+AIN3	PA current
+AIN5	Temperature
+If you need to see the ADC codes 0-4095 for each input, go to hermes/quisk_hardware.py and
+change DEBUG_SENSORS to one.
+
 Quisk Version 4.2.48  November 2025
 ===================================
 This is a quisk fix for a bug in the new OpenHPSDR radios. It fixes use_rx_udp that was reset to zero.

__init__.py

@@ -1,2 +1,2 @@
-#Quisk version 4.2.48
+#Quisk version 4.2.49
 from .quisk import main

configure.py

@@ -2302,7 +2302,7 @@ class ControlMixin:
         if name in ('hot_key_ptt_toggle', 'hot_key_ptt_if_hidden', 'keyupDelay', 'cwTone', 'pulse_audio_verbose_output',
                     'start_cw_delay', 'start_ssb_delay', 'maximum_tx_secs', 'quisk_serial_cts', 'quisk_serial_dsr',
                     'hot_key_ptt1', 'hot_key_ptt2', 'midi_ptt_toggle', 'TxRxSilenceMsec',
-                    'fixed_tune_offset'):
+                    'fixed_tune_offset', 'calibrate_temp_20', 'calibrate_temp_40', 'calibrate_current_0', 'calibrate_current_1'):
           setattr(conf, name, x)
           application.ImmediateChange(name)
         elif name[0:4] in ('lin_', 'win_'):
@@ -2403,6 +2403,7 @@ class BaseWindow(wx.ScrolledWindow, ControlMixin):
   def __init__(self, parent):
     wx.ScrolledWindow.__init__(self, parent)
     ControlMixin.__init__(self, parent)
+    self.SetScrollRate(8, 8)
 
 class ConfigConfig(BaseWindow):
   def __init__(self, parent, width):
@@ -2513,7 +2514,6 @@ The CW message will then repeat. A time of zero means no repeat.'
     sl, btn = self.AddTextSliderHelp(4, "    Repeat secs %.1f  ", 0, 0, 100, self.OnPlayFileRepeat, help_text, span=2, scale=0.1)
     self.NextRow()
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def MakeFileButton(self, text, path, index, name, help_text):
     if index < 10:	# record buttons
       cb = self.AddCheckBox(4, text, self.OnCheckRecPlay)
@@ -2691,7 +2691,6 @@ class ConfigTxAudio(BaseWindow):
     application.CtrlTxAudioPreemph = sld
     self.NextRow()
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def OnTimer(self, event):
     if not self.tmp_playing:
       self.timer.Stop()
@@ -2769,7 +2768,6 @@ class Radios(BaseWindow):	# The "Radios" first-level page
     self.apply_btn = self.AddPushButton(3, "Apply", self.OnBtnApply)
     self.NewRadioNames()
     self.NewTop()
-    self.SetScrollRate(1, 1)
   def NewTop(self, event=None):
     if event:
       btn = event.GetEventObject()
@@ -3006,7 +3004,6 @@ class RadioSection(BaseWindow):		# The pages for each section in the second-leve
       self.AddColSpacer(2, 20)
       self.AddColSpacer(5, 20)
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def OnButtonChangeFavorites(self, event):
     if isinstance(event, (ChoiceCombo, ComboCtrl)):
       path = event.GetValue()
@@ -3131,7 +3128,6 @@ class RadioHardwareBase(BaseWindow):		# The Hardware page in the second-level no
     self.NextRow(7)
     self.AddColSpacer(2, 20)
     self.AddColSpacer(5, 20)
-    self.SetScrollRate(1, 1)
   def OnButtonChangeHardware(self, event):
     if isinstance(event, (ChoiceCombo, ComboCtrl)):
       path = event.GetValue()
@@ -3178,25 +3174,24 @@ class RadioHardware(RadioHardwareBase):		# The Hardware page in the second-level
     data_names = local_conf.GetReceiverData(radio_type)
     col = 1
     border = 2
-    hermes_board_id = 0
+    try:
-    if radio_type == "Hermes":
+      is_HermesLite2 = application.Hardware.is_HermesLite2
-      try:
+    except:
-        hermes_board_id = application.Hardware.hermes_board_id
+      is_HermesLite2 = False
-      except:
-        pass
     if radio_name == Settings[1] and hasattr(application.Hardware, "ProgramGateware"):
       help_text = "Choose an RBF file and program the Gateware (FPGA software) over Ethernet."
       self.AddTextButtonHelp(1, "Gateware Update", "Program from RBF file..", application.Hardware.ProgramGateware, help_text)
       col = 1
       self.NextRow(self.row + 2)
     for name, text, fmt, help_text, values in data_names:
+      text = text.replace("\\u2103", "\u2103")
       if name in ('hardware_file_name', 'widgets_file_name'):
         pass
       elif name[0:4] == platform_ignore:
         pass
       elif name in ('Hermes_BandDictEnTx', ):
         pass
-      elif 'Hl2_' in name and hermes_board_id != 6:
+      elif 'Hl2_' in name and not is_HermesLite2:
         pass
       elif fmt[0:4] in ('dict', 'list'):
         pass
@@ -3225,7 +3220,7 @@ class RadioHardware(RadioHardwareBase):		# The Hardware page in the second-level
           col = 1
           border = 2
           self.NextRow()
-    if hermes_board_id == 6:
+    if is_HermesLite2:
       if col == 4:
         self.NextRow()
       help_text = ('This controls the bias level for transistors in the final power amplifier.  Enter a level from 0 to 255.'
@@ -3241,7 +3236,6 @@ class RadioHardware(RadioHardwareBase):		# The Hardware page in the second-level
       self.HermesWriteBiasButton = self.AddPushButton(7, "Write", self.OnButtonHermesWriteBias, border=0)
       self.HermesWriteBiasButton.Enable(enbl)
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def OnHermesChangeBias0(self, event):
     value = self.HermesBias0.GetValue()
     application.Hardware.ChangeBias0(value)
@@ -3855,7 +3849,6 @@ class RadioSound(BaseWindow):		# The Sound page in the second-level notebook for
         break
     self.gbs = gbs
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def ItemValue(self, row, col):
     data_name = self.sound_names[row][col]
     if col == 4:		# Device names
@@ -4083,7 +4076,6 @@ The Tx bits are sent as the "Alex" filters and are sent to the J16 interface.'
         self.AddBitField(col + 1, 7, 'Hermes_BandDictTx', band, bus, self.ChangeIO)
         self.NextRow()
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def SortCmp(self, item1):
     # Numerical conversion of band name to  megahertz
     try:
@@ -4258,7 +4250,6 @@ class RadioRemote(BaseWindow):		# The Remote page in the second-level notebook f
     self.AddColSpacer(3, 20)
     self.AddColSpacer(6, 20)
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def OnChangePassword(self, event):
     text = local_conf.globals.get('remote_radio_password', '')
     dlg = wx.TextEntryDialog(self, "Please enter a password for remote access",
@@ -4340,7 +4331,6 @@ class xxRadioFilters(BaseWindow):		# The Filters page in the second-level notebo
       self.NextRow()
       index += 1
     self.FitInside()
-    self.SetScrollRate(1, 1)
   def OnChangeFreq(self, event):
     freq = event.GetString()
     radio_dict = local_conf.GetRadioDict(self.radio_name)

hermes/hpsdr_widgets.py

@@ -3,7 +3,7 @@
 #
 # This module is used to add extra widgets to the QUISK screen.
 
-import wx
+import wx, math
 
 class BottomWidgets:	# Add extra widgets to the bottom of the screen
   def __init__(self, app, hardware, conf, frame, gbs, vertBox):
@@ -15,17 +15,143 @@ class BottomWidgets:	# Add extra widgets to the bottom of the screen
     self.num_rows_added = 1
     self.btnPreamp = app.QuiskCheckbutton(frame, self.OnBtnPreamp, text='Preamp')
     gbs.Add(self.btnPreamp, (self.start_row, self.start_col), flag=wx.EXPAND)
+    bw, bh = self.btnPreamp.GetMinSize()
     init = app.hermes_atten_dB
     self.sliderAtten = app.SliderBoxHH(frame, 'Atten %d dB', init, 0, 31, self.OnAtten, True)
     self.sliderAtten.idName = "RfAtten"
     app.midiControls["RfAtten"]	= (self.sliderAtten, self.OnAtten)
     hardware.ChangeAtten(init)
     gbs.Add(self.sliderAtten, (self.start_row, self.start_col + 2), (1, 6), flag=wx.EXPAND)
+    if conf.button_layout == "Small screen":
+      # Display four data items in a single window
+      self.text_temperature = app.QuiskText1(frame, '', bh)
+      self.text_pa_current = app.QuiskText1(frame, '', bh)
+      self.text_fwd_power = app.QuiskText1(frame, '', bh)
+      self.text_swr = app.QuiskText1(frame, '', bh)
+      self.text_data = self.text_temperature
+      self.text_pa_current.Hide()
+      self.text_fwd_power.Hide()
+      self.text_swr.Hide()
+      b = app.QuiskPushbutton(frame, self.OnTextDataMenu, '..')
+      szr = self.data_sizer = wx.BoxSizer(wx.HORIZONTAL)
+      szr.Add(self.text_data, 1, flag=wx.ALIGN_CENTER_VERTICAL)
+      szr.Add(b, 0, flag=wx.ALIGN_CENTER_VERTICAL)
+      gbs.Add(szr, (self.start_row, self.start_col + 10), (1, 2), flag=wx.EXPAND)
+      # Make a popup menu for the data window
+      self.text_data_menu = wx.Menu()
+      item = self.text_data_menu.Append(-1, 'Temperature')
+      app.Bind(wx.EVT_MENU, self.OnDataTemperature, item)
+      item = self.text_data_menu.Append(-1, 'PA Current')
+      app.Bind(wx.EVT_MENU, self.OnDataPaCurrent, item)
+      item = self.text_data_menu.Append(-1, 'Fwd Power')
+      app.Bind(wx.EVT_MENU, self.OnDataFwdPower, item)
+      item = self.text_data_menu.Append(-1, 'SWR')
+      app.Bind(wx.EVT_MENU, self.OnDataSwr, item)
+    else:
+      szr = wx.BoxSizer(wx.HORIZONTAL)
+      gbs.Add(szr, (self.start_row, self.start_col + 10), (1, 18), flag=wx.EXPAND)
+      text_temperature = wx.StaticText(frame, -1, ' Temp 100DC XX', style=wx.ST_NO_AUTORESIZE)
+      size = text_temperature.GetBestSize()
+      text_temperature.Destroy()
+      self.text_temperature = wx.StaticText(frame, -1, '', size=size, style=wx.ST_NO_AUTORESIZE)
+      self.text_pa_current = wx.StaticText(frame, -1, '', size=size, style=wx.ST_NO_AUTORESIZE)
+      self.text_fwd_power = wx.StaticText(frame, -1, '', size=size, style=wx.ST_NO_AUTORESIZE)
+      self.text_swr = wx.StaticText(frame, -1, '', size=size, style=wx.ST_NO_AUTORESIZE)
+      flag=wx.ALIGN_LEFT|wx.ALIGN_CENTER_VERTICAL
+      szr.Add(self.text_temperature, 0, flag=flag)
+      szr.Add(self.text_pa_current, 0, flag=flag)
+      szr.Add(self.text_fwd_power, 0, flag=flag)
+      szr.Add(self.text_swr, 0, flag=flag)
   def OnBtnPreamp(self, event):
     self.hardware.ChangePreamp(self.btnPreamp.GetValue())
   def OnAtten(self, event):
     value = self.sliderAtten.GetValue()
     self.hardware.ChangeAtten(value)
     self.application.hermes_atten_dB = value
+  def Code2FwdRevWatts(self, fwd, rev):	# Convert the fwd/rev power code to watts forward and reverse
+    #print (self.hardware.hermes_rev_power, self.hardware.hermes_fwd_power)
+    fwd = self.hardware.InterpolatePower(fwd)
+    rev = self.hardware.InterpolatePower(rev)
+    # Which voltage is forward and reverse depends on the polarity of the current sense transformer
+    if fwd >= rev:
+      return fwd, rev
+    else:
+      return rev, fwd
   def UpdateText(self):		# Called at intervals
-    pass
+    conf = self.config
+    # Temperature
+    temp = self.hardware.hermes_temperature
+    if conf.calibrate_temp_20 == conf.calibrate_temp_40:
+      temp = " Temp ADC %4d" % temp
+    else:
+      m = 20.0 / (conf.calibrate_temp_40 - conf.calibrate_temp_20)
+      b = 20.0 - m * conf.calibrate_temp_20
+      temp = m * temp + b
+      temp = (" Temp %3.0f" % temp) + u'\u2103'
+    self.text_temperature.SetLabel(temp)
+    # power amp current
+    current = self.hardware.hermes_pa_current
+    if conf.calibrate_current_0 == conf.calibrate_current_1:
+      current = " Amps ADC %4d" % current
+    else:
+      m = 1.0 / (conf.calibrate_current_1 - conf.calibrate_current_0)
+      b = - m * conf.calibrate_current_0
+      current = m * current + b
+      current = " PA %4.0f ma" % (1000*current)
+    self.text_pa_current.SetLabel(current)
+    # forward and reverse peak power
+    if not self.hardware.power_interpolator:	# For no interpolator, show ADC
+      fwd = self.hardware.hermes_fwd_power
+      rev = self.hardware.hermes_rev_power
+      self.text_fwd_power.SetLabel("Fwd ADC %4d" % fwd)
+      self.text_swr.SetLabel("Rev ADC %4d" % rev)
+      return
+    fwd, rev = self.Code2FwdRevWatts(self.hardware.hermes_fwd_peak, self.hardware.hermes_rev_peak)
+    # forward less reverse power
+    power = fwd - rev
+    if power < 0.0:
+      power = 0.0
+    text = " PEP %3.1f watts" % power
+    self.text_fwd_power.SetLabel(text)
+    # SWR based on average power
+    fwd, rev = self.Code2FwdRevWatts(self.hardware.hermes_fwd_power, self.hardware.hermes_rev_power)
+    if fwd >= 0.05:
+      gamma = math.sqrt(rev / fwd)
+      if gamma < 0.98:
+        swr = (1.0 + gamma) / (1.0 - gamma)
+      else:
+        swr = 99.0
+      if swr < 9.95:
+        text = " SWR %4.2f" % swr
+      else:
+        text = " SWR %4.0f" % swr
+    else:
+      text = " SWR  ---"
+    self.text_swr.SetLabel(text)
+  def OnTextDataMenu(self, event):
+    btn = event.GetEventObject()
+    btn.PopupMenu(self.text_data_menu, (0,0))
+  def OnDataTemperature(self, event):
+    self.data_sizer.Replace(self.text_data, self.text_temperature)
+    self.text_data.Hide()
+    self.text_data = self.text_temperature
+    self.text_data.Show()
+    self.data_sizer.Layout()
+  def OnDataPaCurrent(self, event):
+    self.data_sizer.Replace(self.text_data, self.text_pa_current)
+    self.text_data.Hide()
+    self.text_data = self.text_pa_current
+    self.text_data.Show()
+    self.data_sizer.Layout()
+  def OnDataFwdPower(self, event):
+    self.data_sizer.Replace(self.text_data, self.text_fwd_power)
+    self.text_data.Hide()
+    self.text_data = self.text_fwd_power
+    self.text_data.Show()
+    self.data_sizer.Layout()
+  def OnDataSwr(self, event):
+    self.data_sizer.Replace(self.text_data, self.text_swr)
+    self.text_data.Hide()
+    self.text_data = self.text_swr
+    self.text_data.Show()
+    self.data_sizer.Layout()

hermes/quisk_hardware.py

@@ -15,6 +15,7 @@ from quisk_hardware_model import Hardware as BaseHardware
 
 DEBUG = 0
 DEBUG_I2C = 0
+DEBUG_SENSORS = 0
 
 class IOBoard:
   "This class controls the N2ADR IO Board for the HermesLite 2"
@@ -46,9 +47,9 @@ class IOBoard:
     self.old_receive = None
     self.slow = 0
   def HeartBeat(self):	# Called at 10 Hz for housekeeping tasks
-    if not QS.get_params('rx_udp_started'):
+    if not self.hardware.is_HermesLite2:
       return
-    if self.hardware.hermes_board_id != 6:
+    if not QS.get_params('rx_udp_started'):
       return
     if self.have_IO_Board is None:
       resp = self.hardware.ReadI2C(0x7d, 0x41, 0)	# Check for the N2ADR HL2 IO Board
@@ -156,6 +157,7 @@ class Hardware(BaseHardware):
     self.hermes_ip = ""
     self.hermes_code_version = -1
     self.hermes_board_id = -1
+    self.is_HermesLite2 = False
     self.hermes_temperature = 0.0
     self.hermes_fwd_power = 0.0
     self.hermes_rev_power = 0.0
@@ -276,6 +278,7 @@ class Hardware(BaseHardware):
             self.hermes_ip = addr[0]
             self.hermes_code_version = data[9]
             self.hermes_board_id = data[10]
+            self.is_HermesLite2 = self.hermes_board_id == 6 and self.conf.hardware_file_type == "Hermes"
             QS.set_hermes_id(data[9], data[10])
             if data[0x16] >> 6 == 0:
               QS.set_params(bandscopeScale = 2048)
@@ -322,6 +325,7 @@ class Hardware(BaseHardware):
       bid = 6
       self.hermes_code_version = code
       self.hermes_board_id = bid
+      self.is_HermesLite2 = self.hermes_board_id == 6 and self.conf.hardware_file_type == "Hermes"
       QS.set_hermes_id(code, bid)
       st = 'Capture from Hermes device at specified IP %s' % self.hermes_ip
       found = True
@@ -336,9 +340,13 @@ class Hardware(BaseHardware):
   def open(self):
     self.delay_config = True	# Delay sending message to HL2 until after sound starts
     # This list only changes control bits; no use of WriteQueue()
-    for name in ('keyupDelay',
+    self.ImmediateChange('keyupDelay')
-        'hermes_lowpwr_tr_enable', 'hermes_PWM', 'hermes_disable_sync', 'hermes_power_amp', 'Hermes_BandDictEnTx'):
+    self.ImmediateChange('Hermes_BandDictEnTx')
-      self.ImmediateChange(name)
+    if self.is_HermesLite2:
+      for name in ('hermes_lowpwr_tr_enable', 'hermes_PWM', 'hermes_disable_sync', 'hermes_power_amp'):
+        self.ImmediateChange(name)
+    #else:	# DEBUG: Turn on power amp for testing OpenHPSDR radio with my Hermes Lite2
+    #  self.SetControlBit(0x09, 19, 1)
     return self.config_text
   def GetValue(self, name):	# return values stored in the hardware
     if name == 'Hware_Hl2_EepromIP':
@@ -497,7 +505,15 @@ class Hardware(BaseHardware):
     self.key_was_down = key_down
     if self.TFRC_counter >= 3:
       self.TFRC_counter = 0
-      self.hermes_temperature, self.hermes_fwd_power, self.hermes_rev_power, self.hermes_pa_current, self.hermes_fwd_peak, self.hermes_rev_peak = QS.get_hermes_TFRC()
+      AIN1_avg, AIN1_peak, AIN2_avg, AIN2_peak, AIN3, AIN4, AIN5, AIN6 = QS.get_hermes_TFRC()
+      if self.hermes_board_id == 6:
+        (self.hermes_fwd_power, self.hermes_fwd_peak, self.hermes_rev_power, self.hermes_rev_peak,
+         self.hermes_pa_current, self.hermes_temperature) = AIN1_avg, AIN1_peak, AIN2_avg, AIN2_peak, AIN3, AIN5
+      else:
+        (self.hermes_fwd_power, self.hermes_fwd_peak, self.hermes_rev_power, self.hermes_rev_peak,
+         self.hermes_pa_current, self.hermes_temperature) = AIN1_avg, AIN1_peak, AIN2_avg, AIN2_peak, AIN3, AIN5
+      if DEBUG_SENSORS:
+        print("AIN 1-6 %4d %4d %4d %4d %4d %4d" % (AIN1_avg, AIN2_avg, AIN3, AIN4, AIN5, AIN6))
       if self.application.bottom_widgets:
         self.application.bottom_widgets.UpdateText()
     if self.delay_config and QS.get_params('rx_udp_started'):
@@ -886,7 +902,7 @@ class Hardware(BaseHardware):
       QS.set_hermeslite_writepointer(0)
     return False
   def WriteQueue(self, wait=False):
-    if self.hermes_board_id != 6:
+    if not self.is_HermesLite2:
       return False
     self._wait_queue()
     # Send next write

hermes/quisk_widgets.py

@@ -154,6 +154,12 @@ class BottomWidgets:	# Add extra widgets to the bottom of the screen
     current = " PA %4.0f ma" % (1000*current)
     self.text_pa_current.SetLabel(current)
     # forward and reverse peak power
+    if not self.hardware.power_interpolator:	# For no interpolator, show ADC
+      fwd = self.hardware.hermes_fwd_power
+      rev = self.hardware.hermes_rev_power
+      self.text_fwd_power.SetLabel("Fwd ADC %4d" % fwd)
+      self.text_swr.SetLabel("Rev ADC %4d" % rev)
+      return
     fwd, rev = self.Code2FwdRevWatts(self.hardware.hermes_fwd_peak, self.hardware.hermes_rev_peak)
     # forward less reverse power
     power = fwd - rev

quisk.c

@@ -218,14 +218,17 @@ static unsigned char quisk_hermes_to_pc[5 * 4];		// data received from the Herme
 static unsigned char quisk_hermeslite_response[5]; // response from Hermes-Lite commands
 unsigned int quisk_hermes_code_version = -1;		// code version returned by the Hermes hardware
 unsigned int quisk_hermes_board_id = -1;		// board ID returned by the Hermes hardware
-static double hermes_temperature;	// average temperature
+static double hpsdr_AIN1_avg;		// average forward power
-static double hermes_fwd_power;		// average forward power
+static double hpsdr_AIN1_peak;		// peak forward power
-static double hermes_rev_power;		// average reverse power
+static double hpsdr_AIN2_avg;		// average reverse power
-static double hermes_fwd_peak;		// peak forward power
+static double hpsdr_AIN2_peak;		// peak reverse power
-static double hermes_rev_peak;		// peak reverse power
+static double hpsdr_AIN3;		// average power amp current
-static double hermes_pa_current;	// average power amp current
+static double hpsdr_AIN4;
-static int hermes_count_temperature;	// number of temperature samples
+static double hpsdr_AIN5;		// average temperature
-static int hermes_count_current;	// number of current samples
+static double hpsdr_AIN6;
+static int hpsdr_AIN3_count;	// number of current samples
+static int hpsdr_AIN4_count;	// number of current samples
+static int hpsdr_AIN5_count;	// number of current samples
 static int hardware_ptt;		// hardware PTT switch
 
 int quisk_hardware_cwkey;		// hardware CW key from UDP or USB
@@ -3136,31 +3139,43 @@ static PyObject * get_hermes_TFRC(PyObject * self, PyObject * args)
 
 	if (!PyArg_ParseTuple (args, ""))
 		return NULL;
-	if (hermes_count_temperature > 0) {
+	if (hpsdr_AIN5_count > 0) {
-		hermes_temperature /= hermes_count_temperature;
+		hpsdr_AIN5 /= hpsdr_AIN5_count;
-		hermes_fwd_power /= hermes_count_temperature;
+		hpsdr_AIN1_avg /= hpsdr_AIN5_count;
 	}
 	else {
-		hermes_temperature  = 0.0;
+		hpsdr_AIN5  = 0.0;
-		hermes_fwd_power  = 0.0;
+		hpsdr_AIN1_avg  = 0.0;
 	}
-	if (hermes_count_current > 0) {
+	if (hpsdr_AIN3_count > 0) {
-		hermes_rev_power /= hermes_count_current;
+		hpsdr_AIN2_avg /= hpsdr_AIN3_count;
-		hermes_pa_current /= hermes_count_current;
+		hpsdr_AIN3 /= hpsdr_AIN3_count;
 	}
 	else {
-		hermes_rev_power  = 0.0;
+		hpsdr_AIN2_avg  = 0.0;
-		hermes_pa_current  = 0.0;
+		hpsdr_AIN3  = 0.0;
 	}
-	ret = Py_BuildValue("dddddd", hermes_temperature, hermes_fwd_power, hermes_rev_power, hermes_pa_current, hermes_fwd_peak, hermes_rev_peak);
+	if (hpsdr_AIN4_count > 0) {
-	hermes_temperature = 0;
+		hpsdr_AIN4 /= hpsdr_AIN4_count;
-	hermes_fwd_power = 0;
+		hpsdr_AIN6 /= hpsdr_AIN4_count;
-	hermes_rev_power = 0;
+	}
-	hermes_fwd_peak = 0;
+	else {
-	hermes_rev_peak = 0;
+		hpsdr_AIN4  = 0.0;
-	hermes_pa_current = 0;
+		hpsdr_AIN6  = 0.0;
-	hermes_count_temperature = 0;
+	}
-	hermes_count_current = 0;
+	ret = Py_BuildValue("dddddddd", hpsdr_AIN1_avg, hpsdr_AIN1_peak, hpsdr_AIN2_avg, hpsdr_AIN2_peak,
+		hpsdr_AIN3, hpsdr_AIN4, hpsdr_AIN5, hpsdr_AIN6);
+	hpsdr_AIN1_avg = 0;
+	hpsdr_AIN1_peak = 0;
+	hpsdr_AIN2_avg = 0;
+	hpsdr_AIN2_peak = 0;
+	hpsdr_AIN3 = 0;
+	hpsdr_AIN4 = 0;
+	hpsdr_AIN5 = 0;
+	hpsdr_AIN6 = 0;
+	hpsdr_AIN3_count = 0;
+	hpsdr_AIN4_count = 0;
+	hpsdr_AIN5_count = 0;
 	return ret;
 }
 
@@ -3708,19 +3723,24 @@ static int read_rx_udp10(complex double * samp)	// Read samples from UDP using t
 					quisk_set_play_state();
 				}
 			}
-			else if(dindex == 1) {	// temperature and forward power
+			else if(dindex == 1) {
-				hermes_temperature += quisk_hermes_to_pc[4] << 8 | quisk_hermes_to_pc[5];
+				hpsdr_AIN5 += quisk_hermes_to_pc[4] << 8 | quisk_hermes_to_pc[5];
 				power = quisk_hermes_to_pc[6] << 8 | quisk_hermes_to_pc[7];
-				hermes_fwd_power += power;
+				hpsdr_AIN1_avg += power;
-				hermes_fwd_peak = fmax(hermes_fwd_peak, (double)power);
+				hpsdr_AIN1_peak = fmax(hpsdr_AIN1_peak, (double)power);
-				hermes_count_temperature++;
+				hpsdr_AIN5_count++;
 			}
-			else if (dindex == 2) {	// reverse power and current
+			else if (dindex == 2) {
 				power = quisk_hermes_to_pc[8] << 8 | quisk_hermes_to_pc[9];
-				hermes_rev_power += power;
+				hpsdr_AIN2_avg += power;
-				hermes_rev_peak = fmax(hermes_rev_peak, (double)power);
+				hpsdr_AIN2_peak = fmax(hpsdr_AIN2_peak, (double)power);
-				hermes_pa_current += quisk_hermes_to_pc[10] << 8 | quisk_hermes_to_pc[11];
+				hpsdr_AIN3 += quisk_hermes_to_pc[10] << 8 | quisk_hermes_to_pc[11];
-				hermes_count_current++;
+				hpsdr_AIN3_count++;
+			}
+			else if (dindex == 3) {
+				hpsdr_AIN4 += quisk_hermes_to_pc[12] << 8 | quisk_hermes_to_pc[13];
+				hpsdr_AIN6 += quisk_hermes_to_pc[14] << 8 | quisk_hermes_to_pc[15];
+				hpsdr_AIN4_count++;
 			}
 			// convert 24-bit samples to 32-bit samples; int must be 32 bits.
 			index = start + 5;

quisk.py

@@ -6799,7 +6799,7 @@ class App(wx.App):
     if self.timer - self.heart_time0 > 0.10:	# call hardware to perform background tasks:
       self.heart_time0 = self.timer
       Hardware.HeartBeat()
-      if conf.use_rx_udp == 10 and Hardware.hermes_board_id == 6:
+      if Hardware.is_HermesLite2:
         self.tx_inhibit = QS.get_params('quisk_tx_inhibit')
       else:
         self.tx_inhibit = 0

quisk_conf_defaults.py

@@ -488,6 +488,7 @@ power_meter_std_calibrations['HL2FilterE3'] = [[ 0, 0.0 ], [ 25.865384615384617,
           [ 4093.1785714285716, 7.28994845808807 ], [ 4502.496428571429, 8.820837634286566 ], [ 4952.746071428572, 10.673213537486745 ] ]
 #power_meter_std_calibrations['HL2FilterE1'] = [[0, 0.0], [9.07, 0.002], [54.98, 0.014], [148.6, 0.057],
 #          [328.0, 0.208], [611.1, 0.646], [807.0, 1.098], [982.1, 1.6], [1223.3, 2.471], [1517.7, 3.738], [1758.7, 5.02]]
+power_meter_std_calibrations['Show ADC'] = []
 
 ## Hermes_BandDict		Rx IO Bus, dict
 # The Hermes_BandDict sets the 7 bits on the J16 connector for Rx.
@@ -662,6 +663,42 @@ Hermes_BandDictTx = {'160':0, '80':0, '60':0, '40':0, '30':0, '20':0, '17':0, '1
 Hermes_BandDictEnTx = False
 #Hermes_BandDictEnTx = True
 
+## calibrate_temp_20			PA temp ADC at 20\u2103, integer
+# This is the ADC code returned for a temperature of 20C.
+# To see the ADC code being returned, enter zero for both temperature codes.
+# Linear interpolation is used to calculate the temperature.
+# Changes are immediate (no need to restart).
+calibrate_temp_20 = 0
+
+## calibrate_temp_40			PA temp ADC at 40\u2103, integer
+# This is the ADC code returned for a temperature of 40C.
+# To see the ADC code being returned, enter zero for both temperature codes.
+# Linear interpolation is used to calculate the temperature.
+# Changes are immediate (no need to restart).
+calibrate_temp_40 = 0
+
+## calibrate_current_0			PA current ADC at zero, integer
+# This is the ADC code returned for a PA current of zero.
+# To see the ADC code being returned, enter zero for both current codes.
+# Linear interpolation is used to calculate the current.
+# Changes are immediate (no need to restart).
+calibrate_current_0 = 0
+
+## calibrate_current_1			PA current ADC at 1 amp, integer
+# This is the ADC code returned for a PA current of one amp.
+# To see the ADC code being returned, enter zero for both current codes.
+# Linear interpolation is used to calculate the current.
+# Changes are immediate (no need to restart).
+calibrate_current_1 = 0
+
+## power_meter_calib_name		Power meter calibration, text choice
+# This is the calibration table used to convert the power sensor voltage measured by the ADC to the transmit power display.
+# It is a table of ADC codes and the corresponding measured power level.  If you have a power meter, you can create your own
+# table by selecting "New". Then enter ten or more power measurements from low to full power.
+# For the Hermes Lite2 version E3 filter board, use the built-in table "HL2FilterE3".
+# Changes are immediate (no need to restart).
+power_meter_calib_name = 'HL2FilterE3'
+
 
 ################ Receivers SoapySDR, The SoapySDR interface to multiple SDRs.
 ## hardware_file_name		Hardware file path, rfile

setup.py

@@ -7,7 +7,7 @@ import os
 # You must define the version here.  A title string including
 # the version will be written to __init__.py and read by quisk.py.
 
-Version = '4.2.48'
+Version = '4.2.49'
 
 fp = open("__init__.py", "w")	# write title string
 fp.write("#Quisk version %s\n" % Version)