## ## This is an example binkleyforce configuration file ## ## Configuration line format: ## [()] ## ## For all addresses masks ``2:5020/*'' is equal to the ``2:5020/*.0'' ## ## Expression elements: ##
## Time [,,..] ## Speed ## ConnSpeed ## Flag ## Exec ## Inbound, Outbound, Listed, Protected ## ## You can split long strings by adding '\' character to the end of previous ## line. Total length of string is unlimited. For example: ## ## Options NoZmodem \ ## NoZedZap ## ## Config reader directives: ## ## $INCLUDE Include this file ## $LOGFILE Log to this file ## $DEBUGFILE Write debug information to this file ## $DEBUGLEVEL Change debug level ## ## $IFEXP All data between ``$IFEXP'' and ``$ENDIF'' ## directives will be used with the specified ## .... expression, empty lines are unallowed ## $ENDIF ## ## Examples: ## ## $DEBUGLEVEL Outbound hShake ## ## $IFEXP ((2:*/*.* | !protected) & Time 23:00-01:00) ## options NoFreqs ## min_speed_in 14400 ## session_limit_in 600 ## $ENDIF ## $INCLUDE /usr/local/fido/etc/bforce.subst $INCLUDE /usr/local/fido/etc/bforce.passwd address 2:450/256.0@fidonet address 2:450/247.128@fidonet address 20:26/100.0@easynet # # Hide addresses from remote, where
must be one of your AKAs # # hide_our_aka
# # # Allowed options: # [No]Zmodem, [No]ZedZap, [No]DirZap, [No]Janus, [No]Hydra # [No]Chat, [No]FTS1, [No]YooHoo, [No]EMSI, [No]EMSI-II # [No]Freqs, [No]MailOnly, [No]HoldXT, [No]HoldReq, [No]HoldHold # [No]HoldAll, [No]PickUp, [No]RH1 # # Now it is highly recommended to set at least "NoDirZap NoJanus" # options NoDirZap NoJanus NoChat # # Domain outbounds # Domain # #domain lasernet /var/spool/ftn/lasernet/ 161 #domain medianet /var/spool/ftn/medianet/ 776 #domain schoolnet /var/spool/ftn/schoolnet/ 461 # # Log/debug file names (if not defined, used builtins) # #log_file_daemon /var/log/bforce/bf-daemon #log_file /var/log/bforce/bf-log #debug_file /var/log/bforce/bf-debug # # Existing of this file forbid any outgoing modem calls. Existing of # file with name .ttyS1 forbid outgoing calls only via # modem on device /dev/ttyS1, and so on. # nodial_flag /etc/nodial # # Debugging information completness level. Debugging is disabled by # default. Allowed debug levels: config, nodelist, outbound, info, hshake, # ttyio, modem, prot, freq, daemon, full # # It seems to be broken now, use "$DEBUGLEVEL" instead # #debug_level info hshake prot # # # Inbound directories # inbound_directory (Protected) /var/spool/fido/bt/pin inbound_directory /var/spool/fido/bt/in # # Path to your 4D outbound (use zone as extension) # #outbound_directory /var/spool/fido/bt/out # # Path to your AmigaDos style 4D outbound. # (You can use all outbound styles at the same time) # amiga_outbound_directory /var/spool/fido/bt/out # # Directory with your nodelists (for nodelist without full path) # nodelist_directory /var/spool/fido/ndl # # Directory for status files # status_directory /var/spool/fido/bforce # # Sessions history # history_file /var/log/bforce/history # # Minimal connect speeds for incoming/outgoing sessions # #min_speed_in 1200 #min_speed_out 1200 # # Time limit for incoming/outgoing session [seconds] # #session_limit_in 1800 #session_limit_out 1800 # # Abort transfer if minimal CPS stays longer this time (in seconds) # Default value is 60 seconds. # #min_cps_time 120 # # Force usage of this value as minimal CPS (most priority) # min_cps_recv # min_cps_send # # For example: # min_cps_recv (2:5020/1398) 2100 # min_cps_recv (2:5020/1682) 3000 # min_cps_recv (2:5020/1811) 1400 # # Minimal CPS values for Zmodem ,ZedZap, DirZap protocols (Receive/Send) # # # zmodem_mincps_recv 300 15 zmodem_mincps_recv 1200 90 zmodem_mincps_recv 2400 120 zmodem_mincps_recv 4800 240 zmodem_mincps_recv 7200 360 zmodem_mincps_recv 9600 480 zmodem_mincps_recv 12000 600 zmodem_mincps_recv 14400 720 zmodem_mincps_recv 16800 840 zmodem_mincps_recv 19200 960 zmodem_mincps_recv 21600 1080 zmodem_mincps_recv 23600 1180 zmodem_mincps_recv 24000 1200 zmodem_mincps_recv 26400 1320 zmodem_mincps_recv 28800 1440 zmodem_mincps_recv 31200 1600 zmodem_mincps_recv 33600 1700 zmodem_mincps_send 300 15 zmodem_mincps_send 1200 90 zmodem_mincps_send 2400 120 zmodem_mincps_send 4800 240 zmodem_mincps_send 7200 360 zmodem_mincps_send 9600 480 zmodem_mincps_send 12000 600 zmodem_mincps_send 14400 720 zmodem_mincps_send 16800 840 zmodem_mincps_send 19200 960 zmodem_mincps_send 21600 1080 zmodem_mincps_send 23600 1180 zmodem_mincps_send 24000 1200 zmodem_mincps_send 26400 1320 zmodem_mincps_send 28800 1440 zmodem_mincps_send 31200 1600 zmodem_mincps_send 33600 1700 hydra_mincps_recv 300 15 hydra_mincps_recv 1200 90 hydra_mincps_recv 2400 120 hydra_mincps_recv 4800 240 hydra_mincps_recv 7200 360 hydra_mincps_recv 9600 480 hydra_mincps_recv 12000 600 hydra_mincps_recv 14400 720 hydra_mincps_recv 16800 840 hydra_mincps_recv 19200 960 hydra_mincps_recv 21600 1080 hydra_mincps_recv 23600 1180 hydra_mincps_recv 24000 1200 hydra_mincps_recv 26400 1320 hydra_mincps_recv 28800 1440 hydra_mincps_recv 31200 1600 hydra_mincps_recv 33600 1700 hydra_mincps_send 300 15 hydra_mincps_send 1200 90 hydra_mincps_send 2400 120 hydra_mincps_send 4800 240 hydra_mincps_send 7200 360 hydra_mincps_send 9600 480 hydra_mincps_send 12000 600 hydra_mincps_send 14400 720 hydra_mincps_send 16800 840 hydra_mincps_send 19200 960 hydra_mincps_send 21600 1080 hydra_mincps_send 23600 1180 hydra_mincps_send 24000 1200 hydra_mincps_send 26400 1320 hydra_mincps_send 28800 1440 hydra_mincps_send 31200 1600 hydra_mincps_send 33600 1700 # # Automatically set this permissions on the received files # mode_default 100660 mode_arcmail 100660 mode_netmail 100660 mode_request 100660 # # In modem commands you can use: # '|' cartidge return # '^' high DTR # 'v' low DTR # '~' 1 second delay # '`' 1/4 second delay # # Yor modem devices names (will use first not locked one) # ModemDev [<:lock_speed>] # modem_port /dev/ttyS0:57600 # # Send this string to modem before calling # modem_reset_command AT| # # Dial string # modem_dial_prefix ATDP # # Dial string # modem_dial_suffix | # # Hangup string # modem_hangup_command v~^~ATH0| # # Command for getting modem statistic (after outgoing sessions) # # #modem_stat_command AT%S| # if your modem do not send statistic, use this: modem_stat_command AT| # # List of modem responses on modem dial command # # First field is substring of modem response string, first match used! # # Second field value Default return code # connect -- # busy 11 # nocarrier 12 # nodialtone 13 # noanswer 14 # error 15 # # You are free to use something like: ModemDialResp "LINE IN USE" Error 200 # # [Return code] # modem_dial_response "CONNECT" connect modem_dial_response "BUSY" busy modem_dial_response "NO CARRIER" nocarrier modem_dial_response "NO DIAL" nodialTone modem_dial_response "NO ANSWER" noanswer modem_dial_response "VOICE" noanswer modem_dial_response "ERROR" error # # Your nodelists. Will try all nodelists with matching address mask. # nodelist nodelist.ndl *:*/*.0 nodelist 450_256.pnt 2:450/256.* nodelist easynet.ndl 20:26/*.0 nodelist *:*/*.* # # Nodelist phone numbers translation # phone_translate [to_what_translate] phone_translate 375-17- phone_translate 375- 8W # # Your system information (for EMSI only) # system_name XXX Station location Minsk, Belarus sysop_name Evgeniy Kozhuhovskiy phone 375-17-2250238, voice: 375-29-5586164 max_speed 57600 flags XW,V34B,IDC,LMD emsi_OH_time 22:00-07:30 emsi_FR_time 22:30-05:30 # # Our receiver buffer size [bytes] # recv_buffer_size 65536 # # Wait for modem response this time at calling [seconds] # wait_carrier_out 120 # Command to run external SRIF processor # #freq_srif_command /usr/local/lib/u-srif/u-srif # # Files with list of aliases and dirs for FREQs # freq_alias_list /usr/local/fido/etc/freq.aliases freq_dir_list /usr/local/fido/etc/freq.dirs # # Maximal number of files to send on FREQs # freq_limit_number 10 # # Size limit for file requests [bytes] # freq_limit_size 6000000 # # _SEND_ requested files not longer this time [seconds] # freq_limit_time 1200 # # Ignore this masks in file requests # freq_ignore_masks \\* \\*.\\* \\*.zip \\*.rar \\*.tgz \\*.mp3 # # Skip files with ZRPOS on zmodem protocol (else use ZSKIP) # #zmodem_skip_by_pos yes # # Binkleyforce will send empty netmail packet on Zmodem/ZedZap/DirZap # protocols if there is nothing to send (default - No) # zmodem_send_dummy_pkt no # # Initial block size [bytes] for Zmodem/ZedZap/DirZap protocols # #zmodem_start_block_size 512 # # Tx window size [bytes] for Zmodem/ZedZap/DirZap protocols # #zmodem_tx_window 32768 # # Automaticaly skip files with such names at receiving # skip_files_recv *.pif *.swp # # Delay files with such names at receiving/sending # #delay_files_recv !%arcmail !%netmail # We will refuse all except mail #delay_files_send !%netmail # We will send only netmail # # packets # # Our netmail-only uplink #delay_files_recv (2:450/102) !%netmail # # Binkleyforce will delay all receiving files if free space space # in the inbound directory is lower this value [Kbytes] # #min_free_space 20000 # # Tables for recoding to another charset. Tables format is compartible # with HPT, FTrack and possible with something else. # # File names recoding #recode_file_out /usr/local/fido/etc/koi82alt.tbl #recode_file_in /usr/local/fido/etc/alt2koi8.tbl # Intro recoding (Buggy Sidoroff) #recode_intro_in (2:450/236) /usr/local/fido/etc/alt2koi8.tbl # # External programs support. Possible execution options: # # nowait - don't wait for the process termination # logout - write stdout/stderr to the log # setsid - run command in a new session # useshell - run command by calling a shell (/bin/sh) # #run_after_handshake [logout]/bin/echo "Hello, world!" #run_after_session [nowait,setsid]/usr/local/lib/ftp/run-in # # To see a nodelist node information in the log file, write: # #run_after_handshake [useshell,logout]/usr/local/lib/ftn/nlookup $REM_ADDR_FTN # # Path to the directory with "long" fileboxes. Such fileboxes names # has the format "..." (e.g. "2.5020.2120.0"). # The files from such fileboxes are allways queued with a "hold" flavor # #filebox_directory /var/spool/fido/bt/fbox # # Personal fileboxes # filebox
[flavor] # #filebox /var/spool/ftn/fbox/adb 2:5020/2120.1 hold #filebox /var/spool/ftn/fbox/pvc 2:5020/2091 normal # # ?LO files content translation rules # flo_translate # #flo_translate C:\\fido\\spool\\outbound /var/spool/ftn/out #flo_translate \\ / ####################### # DAEMON configuration # # Try counters short description: # # [] # # Allowed 'Keywords': # 'Maxtries' # Increase : every time when we call system # Reset : successful session # 'Maxtries_noansw' # Increase : modem return "noanswer" # Reset : connect # 'Maxtries_noconn' # Increase : cannot connect # Reset : connect # 'Maxtries_hshake' # Increase : handshake failure # Reset : successful handshake # 'Maxtries_sessions' # Increase : any failures after connect (including connect speed too low) # Reset : successful session # 'Maxtries_nodial' # Increase : modem return "nodialtone" # Reset : connect # # Allowed 'Actions': # 'Undialable' - set undialable flag to the system, so we will never try # to call it more # 'Hold' - don't call system during next seconds # 'HoldAll' - don't make outgoing calls to ANY system during next # seconds # maxtries 200 Undialable # Be carefull.. =) maxtries_noansw 5 Hold 7200 # Call two hours later maxtries_noconn 40 Hold 10800 # Don't call 3 hours maxtries_hshake 10 Hold 86400 # 1 day delay maxtries_sessions 10 Hold 3600 # Don't annoy uplinks maxtries_nodial 1 Hold 1200 # Call 20 min later # # Minimum delay between reusings of the same modem [seconds] # daemon_circle_modem 40 # # Outbound queue rescan interval [seconds] # daemon_circle_rescan 60 # # Minimum delay between two outgoing calls to the same system, # depending on the mail/files flavor [seconds] # daemon_circle_normal 80 daemon_circle_direct 40 daemon_circle_crash 20 daemon_circle_immed 10 # # Maximum number of the simultaneously running TCP/IP clients. Zero value # will forbid any outgoing calls via TCP/IP # daemon_maxclients_tcpip 3 # # Maximum number of the simultaneously running modem clients. Zero value # will forbid any outgoing calls via modems # daemon_maxclients_modem 1 # # Daemon PID file name # daemon_pid_file /var/run/bforce.pid # # Syslog facility (see man 3 openlog and /usr/include/sys/syslog.h for list of facilities) # 64 == 8<3 == # See SYSLOG for details # syslog_facility 64 # # Where to listen (0.0.0.0 for all available) # bind_ip 127.0.0.1 # # Holdall flag (if exists, no mail will sent) # nomail_flag /etc/nomail # That's all!