EMSI handshake FTSC-0088 compliant, protocol_order, EMSI TZUTC

CHANGES

@@ -228,9 +228,25 @@ Alexey Khromov (zx@zxalexis.ru)
  + Added pre-init debugging (primarily of config readout) to stderr by -v
    option. Vanished out errorful calls to "log" and "debug" before log and
    debug files initialization.
- + As of bison is default yacc for (almost) every foss system - fix
-   warning of yacc compliance (delete -y flag in Makefile.in)
  + Fixed build on 64-bit systems (amd64 and aarch64)
  + Initially added config options incpkt_flag and incbdl_flag to raise
    up flag-driven tosser manipulation
    
+0.24.2
+ + Fixed environment variables while executing external programs
+   on handshake or session end
+ + Fixed flags working on arcmail/netmail recieve
+ 
+0.25
+ + EMSI handshake logic reworked to comply with EMSI-II std (FTSC-0088)
+ + New option: proto_order - dezired protocol order for outgoing calls 
+   in EMSI session handshake
+   EMSI-II-compliance works as follows:
+    * if both (caller and callee) expose EII flag - selected proto
+    will be first in caller compat.options compatible with callee
+    * if caller is EMSI-I-compliant and does not show EII flad - 
+    selection by callee internal order from compatible with caller
+ + Changed ifcico protocol port hardcoded to num and not name from
+   /etc/services line (as of abscence of latter)
+ + Config example reworked to include new options
+ + New option: emsi_send_tz - to send TZUTC EMSI-handshake part.

INSTALL.ru

@@ -1,10 +1,10 @@
 В этом файле описывается процесс установки и настройки
-ÆÉÄÏÎÅÔ-ÓÏ×ÍÅÓÔÉÍÏÇÏ ÍÅÊÌÅÒÁ bforce 0.22.8.ugenk1.
+фидонет-совместимого мейлера bforce 0.xx.
 
 В данном документе приняты следующие обозначения:
 
 <SRCDIR> - путь, куда вы распаковали тарболл с исходными
-	   ÔÅËÓÔÁÍÉ bforce 0.22.8.ugenk1 (ÄÁÌÅÅ bforce)
+	   текстами bforce 0.xx (далее bforce)
 Тарболл  - файл с расширением tar.gz, или tar.bz2
 
 
@@ -24,14 +24,14 @@ gmake
 
 Распакуйте тарболл следующими командами:
 
-gzip -d bforce-0.22.8.ugenk1.tar.gz
+gzip -d bforce-master.tar.gz
 или 
-bzip2 -d bforce-0.22.8.ugenk1.tar.bz2
+bzip2 -d bforce-master.tar.bz2
 
-tar -xvf bforce-0.22.8.ugenk1.tar
+tar -xvf bforce-master.tar
 
-ðÅÒÅÊÄÉÔÅ × ÄÉÒÅËÔÏÒÉÀ bforce-0.22.8.ugenk1/source:
-cd <SRCDIR>/bforce-0.22.8.ugenk1/source
+Перейдите в директорию bforce/source:
+cd <SRCDIR>/bforce/source
 
 Для создания Makefile, который наиболее подходит к вашей
 системе, наберите:
@@ -76,6 +76,11 @@ gmake install
 Настройка
 =========
 
+Рекомендуется установить системную переменную BFCONFIG,
+указывающую на местоположение конфигурации bforce.
+Проще всего через /etc/environment для общесистемной или 
+.profile для переменной пользователя.
+
 Для нормальной работы вам нужно отредактировать конфигурационные файлы
 bforce. По умолчанию они находятся в /usr/local/fido/etc и называются
 bforce.conf - основной конфигурационный файл bforce
@@ -125,6 +130,19 @@ cat `which mgetty` |strings |grep FIDO |wc -l
 
 где news - это пользователь, из-под которого у вас работает ftn-подсистема.
 
+Bforce при ИСХОДЯЩИХ звонках использует файлы блокировки порта модема,
+при несовпадении каталога или невозможности создания файла
+mgetty сбросит модем во время звонка. 
+Поэтому настоятельно рекомендуется проверить права на папку /var/lock
+и то, на какой ФС она расположенв.
+Современные системы имеют тенденцию к применению /var/lock как ссылки
+на /run/lock, а ФС /run монтируется и создается на tmpfs при каждой 
+загрузке с помощью systemd-tempfiles.
+Для изменения поведения необходимо создать файл в /etc/tempfiles.d/, 
+совпадающим (за исключением части имени -part) c именем файла в 
+/usr/lib/systemd/systemd-tempfiles.d. 
+Рабочий пример legacy-part.conf в папке contrib.
+
 Совместная работа с inetd/xinetd
 ================================
 К сожалению (или к счастью), bforce не умеет самостоятельно принимать входящие
@@ -150,6 +168,7 @@ init.d/bforce		   - init-
 bfha			   - bforce history analyzer (bfha)
 bfha/README		   - bfha README
 bfha/bfha.pl		   - собственно, bfha
+legacy-part.conf   - файл для донастройки прав на /run/lock в systemd
 u-srif		 	   - продвинутый freq-процессор
 u-srif/u-srif-index.py     \ с поддержой отчетов,
 u-srif/u-srif-lookup.py     \ ограничений, 

contrib/legacy-part.conf

@@ -0,0 +1,19 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+
+# See tmpfiles.d(5) for details
+
+# These files are considered legacy and are unnecessary on legacy-free
+# systems.
+
+d /run/lock 0777 root lock -
+L /var/lock - - - - ../run/lock
+
+# /run/lock/subsys is used for serializing SysV service execution, and
+# hence without use on SysV-less systems.
+
+d /run/lock/subsys 0775 root lock -

examples/bforce.conf

@@ -63,6 +63,12 @@ address 20:26/100.0@easynet
 #
 options NoDirZap NoJanus NoChat
 
+# Protocol order for outgoing EMSI calls
+# Tolerant to Options (i.e. you can order all kind of protos
+# as of TZA,KER,JAN and SLK are not supported at all
+# Default: HYD,JAN,DZA,ZAP,ZMO,TZA,SLK,KER
+proto_order HYD,ZMO,ZAP,DZA,JAN,TZA,KER,SLK
+
 #
 # Domain outbounds
 #   Domain <domain_name> <outbound_dir> <zone>
@@ -109,13 +115,13 @@ split_inbound yes
 #
 # Path to your 4D outbound (use zone as extension)
 #
-#outbound_directory /var/spool/fido/bt/out
+outbound_directory /var/spool/fido/bt/out
 
 #
 # Path to your AmigaDos style 4D outbound.
 # (You can use all outbound styles at the same time)
 #
-amiga_outbound_directory /var/spool/fido/bt/out
+#amiga_outbound_directory /var/spool/fido/bt/out
 
 #
 # Directory with your nodelists (for nodelist without full path)
@@ -253,6 +259,10 @@ mode_request 100660
 #	'~'	1 second delay
 #	'`'	1/4 second delay
 
+# Modem lock directory (/var/lock as in FHS-3.0 
+# if you have it on tmpfs by systemd - read INSTALL.ru)
+# uucp_lock_directory /var/lock
+
 #
 # Yor modem devices names (will use first not locked one)
 #   ModemDev <device>[<:lock_speed>]
@@ -342,6 +352,9 @@ max_speed 57600
 flags XW,V34B,IDC,LMD
 emsi_OH_time 22:00-07:30
 emsi_FR_time 22:30-05:30
+#emsi_send_tz no
+#emsi_send_time no
+
 
 #
 # Our receiver buffer size [bytes]
@@ -442,6 +455,23 @@ skip_files_recv *.pif *.swp
 #   setsid   - run command in a new session
 #   useshell - run command by calling a shell (/bin/sh)
 #
+#   Bforce will make environment for external programs 
+#   which include these variables:
+#   $REM_ADDR_FTN - remote ftn address
+#   $REM_ADDR_INET - remote inet address
+#   $LOC_ADDR_FTN - local ftn address
+#   $LOC_ADDR_INET - local inet address
+#   $PASSWORD - session password
+#   $MAILER - remote mailer
+#   $LOCATION - remote location
+#   $SYSOP - remote SysOp name
+#   $SYSTEM_NAME - remote station name
+#   $PHONE - remote phone 
+#   $FLAGS - remote flags
+#   $PROTECTED - password protected on both sides
+#   $LISTED - present in nodelist
+#   $INBOUND - current inbound path for this remote
+#
 #run_after_handshake [logout]/bin/echo "Hello, world!"
 #run_after_session [nowait,setsid]/usr/local/lib/ftp/run-in
 #

source/.version

@@ -1 +1 @@
-0.24.2
+0.25

source/bforce/conf_proc.c

@@ -84,6 +84,8 @@ s_conf_entry bforce_config[BFORCE_NUMBER_OF_KEYWORDS+1] = {
 	CONF_KEY(emsi_FR_time,               CT_STRING),
 	CONF_KEY(emsi_OH_time,               CT_STRING),
 	CONF_KEY(emsi_slave_sends_nak,       CT_BOOLEAN),
+	CONF_KEY(emsi_send_tz,				 CT_BOOLEAN),
+	CONF_KEY(emsi_send_time,			 CT_BOOLEAN),
 	CONF_KEY(filebox,                    CT_FILEBOX),
 	CONF_KEY(filebox_directory,          CT_PATH),
 	CONF_KEY(flags,                      CT_STRING),
@@ -144,6 +146,7 @@ s_conf_entry bforce_config[BFORCE_NUMBER_OF_KEYWORDS+1] = {
 	CONF_KEY(password,                   CT_PASSWORD),
 	CONF_KEY(phone,                      CT_STRING),
 	CONF_KEY(phone_translate,            CT_TRANSLATE),
+	CONF_KEY(proto_order,				 CT_STRING),
 	CONF_KEY(recode_file_in,             CT_STRING),
 	CONF_KEY(recode_file_out,            CT_STRING),
 	CONF_KEY(recode_intro_in,            CT_STRING),

source/bforce/io_tcpip.c

@@ -123,8 +123,8 @@ int tcpip_connect(const char *hostname, e_tcpmode tcpmode)
 		port = "binkp";
 	else if( tcpmode == TCPMODE_TELNET )
 		port = "telnet";
-	else /* Default service name is "fido" */
-		port = "fido";
+	else /* Can not rely on /etc/services - it is not well-known port */
+		port = "60179";
 
 	if( ISDEC(port) )
 		server.sin_port = htons(atoi(port));

source/bforce/io_unix_lock.c

@@ -77,7 +77,7 @@ static char *lock_getname(const char *lockdir, const s_modemport *modemport)
 	
 	ASSERT(modemport != NULL);
 	
-	if( lockdir && *lockdir )
+	if( *lockdir )
 		lckname = (char *)xstrcpy(lockdir);
 	else
 		lckname = (char *)xstrcpy(BFORCE_LOCK_DIR);
@@ -314,7 +314,7 @@ int port_lock(const char *lockdir, const s_modemport *modemport)
 	char *lckname;
 	char *tmpname, *p_tmpname;
 	
-	if( lockdir && *lockdir )
+	if( *lockdir )
 		tmpname = xstrcpy(lockdir);
 	else
 		tmpname = xstrcpy(BFORCE_LOCK_DIR);

source/bforce/prot_emsi.c

@@ -598,6 +598,8 @@ void emsi_set_sysinfo(s_emsi *emsi, s_emsi *remote_emsi, int hrc,
 	s_cval_entry *addr_ptr;
 	s_cval_entry *hide_ptr;
 	s_faddr *primary = NULL;
+	char xdt[EMSI_MAXXDATETIME+1];
+	time_t xtm;
 	
 	const long options      = conf_options(cf_options);
 	const long speed        = conf_number(cf_max_speed);
@@ -737,6 +739,10 @@ void emsi_set_sysinfo(s_emsi *emsi, s_emsi *remote_emsi, int hrc,
 			{ emsi->compcodes.JAN = 1; }
 		if( (options & OPTIONS_NO_HYDRA) != OPTIONS_NO_HYDRA )
 			{ emsi->compcodes.HYD = 1; }
+		DEB((D_HSHAKE,"Generated compcodes for caller: NCP:%x.ZMO:%x.ZAP:%x.DZA:%x.JAN:%x.HYD:%x.KER:%x.SLK:%x.TZA:%x",
+		 emsi->compcodes.NCP, emsi->compcodes.ZMO, emsi->compcodes.ZAP,
+		 emsi->compcodes.DZA, emsi->compcodes.JAN, emsi->compcodes.HYD,
+		 emsi->compcodes.KER, emsi->compcodes.SLK, emsi->compcodes.TZA));
 	}
 	else
 	{
@@ -813,6 +819,22 @@ void emsi_set_sysinfo(s_emsi *emsi, s_emsi *remote_emsi, int hrc,
 		strnxcpy(emsi->flags,    p_flags     ? p_flags     : "MO",      sizeof(emsi->flags));
 	}
 	
+	/* ----------------------------------------------------------------- */
+	/* Data for {TZUTC} and {XDATETIME} field                            */
+	/* ----------------------------------------------------------------- */
+	
+	if ( conf_boolean(cf_emsi_send_tz) ) {
+		emsi->have_tzutc = 1;
+		emsi->tzutc = (int)(time_gmtoffset());
+	}
+	
+	if ( conf_boolean(cf_emsi_send_time) ) {
+		emsi->have_xdatetime = 1;
+		
+		strnxcpy(xdt,time_string_format(xdt, EMSI_MAXXDATETIME, "%d.%m.%Y %H:%M:%S %z", xtm),EMSI_MAXXDATETIME); 
+		strnxcpy(emsi->xdatetime, xdt, sizeof(emsi->xdatetime));
+	}
+	
 	/* ----------------------------------------------------------------- */
 	/* Data for {OHFR} field                                             */
 	/* ----------------------------------------------------------------- */

source/bforce/prot_emsi_api.c

@@ -134,6 +134,7 @@ int emsi_incoming(s_handshake_protocol *THIS)
 	int rc = HRC_OK;
 	s_emsi *remote_emsi = NULL;
 	s_emsi *local_emsi = NULL;
+	char *p = NULL;
 	
 	ASSERT(THIS);
 	ASSERT(THIS->remote_data);
@@ -198,7 +199,34 @@ int emsi_incoming(s_handshake_protocol *THIS)
 				
 		/*
 		 * Set protocol that we will use
+		 * EMSI-II compatible as of v0.25
 		 */
+		if ( remote_emsi->compcodes.EII ) {
+			/* EMSI-II relies on protocol order sent by CALLER
+			 * we must agree on first matching protocol
+			 */
+			p = xstrcpy( remote_emsi->proto_order );
+			THIS->protocol = PROT_NOPROT;
+			for ( p = strtok( p, "," ); p ; p=strtok( NULL, "," ) ) {
+				if ( !strcmp(p, "ZMO") && !(options & OPTIONS_NO_ZMODEM)) {
+					if ( THIS->protocol == PROT_NOPROT ) THIS->protocol = PROT_ZMODEM;
+				}
+				if ( !strcmp(p, "HYD") && !(options & OPTIONS_NO_HYDRA)) {
+					if ( THIS->protocol == PROT_NOPROT ) THIS->protocol = PROT_HYDRA;
+				}
+				if ( !strcmp(p, "ZAP") && !(options & OPTIONS_NO_ZEDZAP)) {
+					if ( THIS->protocol == PROT_NOPROT ) THIS->protocol = PROT_ZEDZAP;
+				}
+				if ( !strcmp(p, "DZA") && !(options & OPTIONS_NO_DIRZAP)) {
+					if ( THIS->protocol == PROT_NOPROT ) THIS->protocol = PROT_DIRZAP;
+				}
+				/* if ( !strcmp(p, "JAN") && !(options & OPTIONS_NO_JANUS)) {
+					if ( THIS->protocol == PROT_NOPROT ) THIS->protocol = PROT_JANUS;
+				} */
+			}
+			
+		} else {
+			/* EMSI-I relies on our self order, not the CALLER's */
 			if( remote_emsi->compcodes.HYD && !(options & OPTIONS_NO_HYDRA) )
 				THIS->protocol = PROT_HYDRA;
 			else if( remote_emsi->compcodes.ZAP && !(options & OPTIONS_NO_ZEDZAP) )
@@ -208,8 +236,9 @@ int emsi_incoming(s_handshake_protocol *THIS)
 			else /* NCP */
 			{
 				THIS->protocol = PROT_NOPROT;
-			rc = HRC_NO_PROTOS;
 			}
+		}
+		if ( THIS->protocol == PROT_NOPROT ) rc = HRC_NO_PROTOS;
 		
 		/*
 		 * Check EMSI flags and set corresponding local HOLD flags

source/bforce/prot_emsi_misc.c

@@ -103,6 +103,10 @@ char *emsi_createdat(s_emsi *emsi)
 	char *tmp = NULL;
 	char buf[100];
 	char abuf[BF_MAXADDRSTR+1];
+	char *p_order = NULL;
+	char *ord = NULL;
+	
+	
 	
 	tmp = (char *)xstrcpy("**EMSI_DAT0000");
 	
@@ -179,14 +183,79 @@ char *emsi_createdat(s_emsi *emsi)
 			tmp = add_char(tmp, '}');
 		}
 			
-		/* compatibility_codes */
+		/* compatibility_codes (EMSI behavior as FTS-0088) */
 		tmp = add_char(tmp, '{');
-		if( emsi->compcodes.NCP ) tmp = add_str(tmp, "NCP,");
-		if( emsi->compcodes.ZMO ) tmp = add_str(tmp, "ZMO,");
-		if( emsi->compcodes.ZAP ) tmp = add_str(tmp, "ZAP,");
-		if( emsi->compcodes.DZA ) tmp = add_str(tmp, "DZA,");
-		if( emsi->compcodes.JAN ) tmp = add_str(tmp, "JAN,");
+		
+		p_order = conf_string(cf_proto_order);
+		
+		if ( !p_order ) {
 			if( emsi->compcodes.HYD ) tmp = add_str(tmp, "HYD,");
+			if( emsi->compcodes.JAN ) tmp = add_str(tmp, "JAN,");
+			if( emsi->compcodes.DZA ) tmp = add_str(tmp, "DZA,");
+			if( emsi->compcodes.ZAP ) tmp = add_str(tmp, "ZAP,");
+			if( emsi->compcodes.ZMO ) tmp = add_str(tmp, "ZMO,");
+			if( emsi->compcodes.TZA ) tmp = add_str(tmp, "TZA,");
+			if( emsi->compcodes.SLK ) tmp = add_str(tmp, "SLK,");
+			if( emsi->compcodes.KER ) tmp = add_str(tmp, "KER,");
+			if( emsi->compcodes.NCP ) tmp = add_str(tmp, "NCP,");
+		} else {
+			ord = xmalloc(4);
+			DEB((D_HSHAKE,"Protocol order found: %s", p_order));
+			ord = strncpy(ord, p_order,3);
+			ord[3] = '\0';
+			DEB((D_HSHAKE,"Protocol order chunk: %s", ord));
+			if ( ord == NULL )
+				DEB((D_HSHAKE,"EMSI create order error"));
+			if ( !strcmp(ord,"HYD") )
+				if ( emsi->compcodes.HYD) tmp = add_str(tmp, "HYD,");
+			if ( !strcmp(ord,"JAN") )
+				if ( emsi->compcodes.JAN) tmp = add_str(tmp, "JAN,");
+			if ( !strcmp(ord,"DZA") )
+				if ( emsi->compcodes.DZA) tmp = add_str(tmp, "DZA,");
+			if ( !strcmp(ord,"ZAP") )
+				if ( emsi->compcodes.ZAP) tmp = add_str(tmp, "ZAP,");
+			if ( !strcmp(ord,"ZMO") )
+				if ( emsi->compcodes.ZMO) tmp = add_str(tmp, "ZMO,");
+			if ( !strcmp(ord,"TZA") )
+				if ( emsi->compcodes.TZA) tmp = add_str(tmp, "TZA,");
+			if ( !strcmp(ord,"SLK") )
+				if ( emsi->compcodes.SLK) tmp = add_str(tmp, "SLK,");
+			if ( !strcmp(ord,"KER") )
+				if ( emsi->compcodes.KER) tmp = add_str(tmp, "KER,");
+			if ( !strcmp(ord,"NCP") )
+				if ( emsi->compcodes.NCP) tmp = add_str(tmp, "NCP,");
+			p_order = strchr(p_order, ',');
+			if ( p_order ) p_order = p_order+1; /* skip ',' */
+			while ( p_order ) {
+				ord = strncpy(ord, p_order,3);
+				ord[3] = '\0';
+				DEB((D_HSHAKE,"Protocol order chunk: %s", ord));
+				if ( ord == NULL )
+					DEB((D_HSHAKE,"EMSI create order error"));
+				if ( !strcmp(ord,"HYD") )
+					if ( emsi->compcodes.HYD) tmp = add_str(tmp, "HYD,");
+				if ( !strcmp(ord,"JAN") )
+					if ( emsi->compcodes.JAN) tmp = add_str(tmp, "JAN,");
+				if ( !strcmp(ord,"DZA") )
+					if ( emsi->compcodes.DZA) tmp = add_str(tmp, "DZA,");
+				if ( !strcmp(ord,"ZAP") )
+					if ( emsi->compcodes.ZAP) tmp = add_str(tmp, "ZAP,");
+				if ( !strcmp(ord,"ZMO") )
+					if ( emsi->compcodes.ZMO) tmp = add_str(tmp, "ZMO,");
+				if ( !strcmp(ord,"TZA") )
+					if ( emsi->compcodes.TZA) tmp = add_str(tmp, "TZA,");
+				if ( !strcmp(ord,"SLK") )
+					if ( emsi->compcodes.SLK) tmp = add_str(tmp, "SLK,");
+				if ( !strcmp(ord,"KER") )
+					if ( emsi->compcodes.KER) tmp = add_str(tmp, "KER,");
+				if ( !strcmp(ord,"NCP") )
+					if ( emsi->compcodes.NCP) tmp = add_str(tmp, "NCP,");
+				p_order = strchr(p_order, ',');
+				if ( p_order ) p_order = p_order+1; /* skip ',' */	
+			}
+			free(ord);
+		}
+		
 		if( emsi->compcodes.FRQ ) tmp = add_str(tmp, "FRQ,");
 		if( emsi->compcodes.NRQ ) tmp = add_str(tmp, "NRQ,");
 		if( emsi->compcodes.ARC ) tmp = add_str(tmp, "ARC,");
@@ -325,10 +394,15 @@ char *emsi_createdat(s_emsi *emsi)
 		
 		tmp = add_char(tmp, '{');
 		tmp = add_char(tmp, '[');
-		sprintf(buf, "+%04d", emsi->tzutc);
-		tmp = add_str(tmp, buf);
+		/* BUGGY */
+		// sprintf(buf, "+%04d", emsi->tzutc);
+		ord = xmalloc(6);
+		ord = xstrcpy(time_string_gmtoffset(ord));
+		ord[5] = '\0';
+		tmp = add_str(tmp, ord);
 		tmp = add_char(tmp, ']');
 		tmp = add_char(tmp, '}');
+		free(ord);
 	}
 	
 	/* {XDATE} indentifier.. What's the fucking invention :-/
@@ -450,6 +524,8 @@ int emsi_parsedat(char *emsi_dat, s_emsi *emsi)
 {
 	int i;
 	char *tmp, *p, *q, *n;
+	unsigned int tzh, tzm,tzn ;
+	char *tzc, *otmp;
 	
 	while( (tmp=get_field(&emsi_dat, '{', '}')) != NULL )
 	{
@@ -525,13 +601,64 @@ int emsi_parsedat(char *emsi_dat, s_emsi *emsi)
 			/* compatibility codes */
 			if( (p=get_field(&emsi_dat, '{', '}')) == NULL ) return(1);
 			DEB((D_HSHAKE, "parse_emsidat: compatibility codes: %s", p));
+			emsi->proto_order[0] = '\0';
+			
 			for( p = strtok(p, ","); p; p=strtok(NULL, ",") )
 			{
-				     if( !strcmp(p, "ZMO") ) emsi->compcodes.ZMO = 1;
+				/*   if( !strcmp(p, "ZMO") ) emsi->compcodes.ZMO = 1;
 				else if( !strcmp(p, "ZAP") ) emsi->compcodes.ZAP = 1;
 				else if( !strcmp(p, "DZA") ) emsi->compcodes.DZA = 1;
 				else if( !strcmp(p, "JAN") ) emsi->compcodes.JAN = 1;
 				else if( !strcmp(p, "HYD") ) emsi->compcodes.HYD = 1;
+				*/
+				if ( !strcmp(p, "ZMO") ) {
+					emsi->compcodes.ZMO = 1;
+					otmp = strcat(emsi->proto_order,"ZMO,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "ZAP") ) {
+					emsi->compcodes.ZAP = 1;
+					otmp = strcat(emsi->proto_order,"ZAP,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "DZA") ) {
+					emsi->compcodes.DZA = 1;
+					otmp = strcat(emsi->proto_order,"DZA,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "JAN") ) {
+					emsi->compcodes.JAN = 1;
+					otmp = strcat(emsi->proto_order,"JAN,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "HYD") ) {
+					emsi->compcodes.HYD = 1;
+					otmp = strcat(emsi->proto_order,"HYD,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "KER") ) {
+					emsi->compcodes.KER = 1;
+					otmp = strcat(emsi->proto_order,"KER,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "TZA") ) {
+					emsi->compcodes.TZA = 1;
+					otmp = strcat(emsi->proto_order,"TZA,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
+				else if ( !strcmp(p, "SLK") ) {
+					emsi->compcodes.SLK = 1;
+					otmp = strcat(emsi->proto_order,"SLK,");
+					strcpy(emsi->proto_order, otmp);
+					DEB((D_HSHAKE,"Parse_emsidat: ordered proto added: %s", otmp));
+				}
 				else if( !strcmp(p, "NCP") ) emsi->compcodes.NCP = 1;
 				else if( !strcmp(p, "NRQ") ) emsi->compcodes.NRQ = 1;
 				else if( !strcmp(p, "ARC") ) emsi->compcodes.ARC = 1;
@@ -542,6 +669,9 @@ int emsi_parsedat(char *emsi_dat, s_emsi *emsi)
 				else if( !strcmp(p, "BBS") ) emsi->compcodes.BBS = 1;
 				else if( !strcmp(p, "HFR") ) emsi->compcodes.HFR = 1;
 			}
+			/* Delete last comma from order list */
+			emsi->proto_order[strlen(emsi->proto_order)-1] = '\0';
+			DEB((D_HSHAKE,"Ordered compcodes: %s",emsi->proto_order));
 			
 			/* mailer information */
 			if( (p=get_field(&emsi_dat, '{', '}')) == NULL ) return(1);
@@ -646,13 +776,31 @@ int emsi_parsedat(char *emsi_dat, s_emsi *emsi)
 		}
 		else if( strcmp(tmp, "TZUTC") == 0 )
 		{	
-			emsi->have_tzutc = 1;
-			
 			if( (p=get_field(&emsi_dat, '{', '}')) == NULL ) return(1);
 			if( (p=get_field(&p, '[', ']')) == NULL ) return(1);
+			/* Parse EMSI TZUTC in fmt (+|-)HHMM */
+			if( *p ) {
+				tzc = malloc(2);
+				DEB((D_HSHAKE, "Got TZUTC=%s for parsing", p));
+				tzn = sscanf( p, "%1c%02u%02u", tzc, &tzh, &tzm);
+				tzc[1] = '\0';
+				if ( tzn == 3) {
+					DEB((D_HSHAKE, "Got TZC=%s , H=%u, M=%u", tzc, tzh,tzm));
+					emsi->have_tzutc = 1;
+					if ( strcmp(tzc, "-") == 0 ) {
+						emsi->tzutc = -(tzh*60 + tzm);
+					} else {
+						emsi->tzutc = tzh*60 + tzm;
+					}
+				} else {
+					DEB((D_HSHAKE,"TZUTC value not parsed!"));
+				}
+				free(tzc);
+			}
 		}
 		else
 		{
+			DEB((D_HSHAKE, "Step - no known EMSI-part - got %s", tmp));
 			strnxcat(emsi->addons, "{", sizeof(emsi->addons));
 			strnxcat(emsi->addons, tmp, sizeof(emsi->addons));
 			strnxcat(emsi->addons, "}", sizeof(emsi->addons));

source/bforce/sess_answ.c

@@ -71,6 +71,7 @@ int answ_system(e_session type, char *connstr, int inetd)
 
 	if( inetd )
 	{
+		log("Answering TCPIP call...");
 		if( connstr && *connstr )
 			state.connstr = (char*)xstrcpy(connstr);
 		else if( getpeername(0, (struct sockaddr*)&client, &clientlen) == -1 )
@@ -116,9 +117,10 @@ int answ_system(e_session type, char *connstr, int inetd)
 		port_carrier(0, TRUE);
 		
 		rc = session();
-		
+		log("Session ended up, rc=%d, inetd=%d", rc, inetd);
 		if( ( !inetd ) )
 		{
+			log("Deactivating modem port");
 			port_deinit(0, &oldtio);
 			port_close();
 		}

source/bforce/u_time.c

@@ -173,18 +173,18 @@ long time_gmtoffset(void)
 	time_t tt       = time(NULL);
 	struct tm local = *localtime(&tt);
 	struct tm gmt   = *gmtime(&tt);
-	long tz         = gmt.tm_yday - local.tm_yday;
+	long tz         = local.tm_yday - gmt.tm_yday;
 	
 	if( tz > 1 )
-		tz = -24;
-	else if( tz < -1 )
 		tz = 24;
+	else if( tz < -1 )
+		tz = -24;
 	else
 		tz *= 24;
 	
-	tz += gmt.tm_hour - local.tm_hour;
+	tz += local.tm_hour - gmt.tm_hour;
 	tz *= 60;
-	tz += gmt.tm_min - local.tm_min;
+	tz +=  local.tm_min - gmt.tm_min;
 	
 	return tz;
 }
@@ -202,10 +202,11 @@ char *time_string_gmtoffset(char *buffer)
 {
 	long tz   = time_gmtoffset();
 	char sign = (tz > 0)?'+':'-';
-	int hour  = tz/60;
-	int mint  = tz%60;
+	tz = abs(tz);
+	unsigned int hour  = tz/60;
+	unsigned int mint  = tz%60;
 	
-	sprintf(buffer, "%c%02d%02d", sign, hour, mint);
+	sprintf(buffer, "%c%02u%02u", sign, hour, mint);
 	
 	return buffer;
 }

source/include/confread.h

@@ -179,6 +179,8 @@ typedef enum {
 	cf_emsi_FR_time,
 	cf_emsi_OH_time,
 	cf_emsi_slave_sends_nak,
+	cf_emsi_send_tz,
+	cf_emsi_send_time,
 	cf_filebox,
 	cf_filebox_directory,
 	cf_flags,
@@ -239,6 +241,7 @@ typedef enum {
 	cf_password,
 	cf_phone,
 	cf_phone_translate,
+	cf_proto_order,
 	cf_recode_file_in,
 	cf_recode_file_out,
 	cf_recode_intro_in,

source/include/prot_emsi.h

@@ -116,7 +116,10 @@ struct compcodes
 	       ZAP:1,   /* ZedZap    (Zmodem variant)        */
 	       DZA:1,   /* DirectZAP (Zmodem variant)        */
 	       JAN:1,   /* Janus                             */
-	       HYD:1;   /* Hydra                             */
+	       HYD:1,   /* Hydra                             */
+	       KER:1,	/* Kermit, not supported             */
+	       SLK:1,   /* SEALink, not supported            */
+	       TZA:1;   /* TrapDoor DirectZAP, not supported */
 
 	UINT16 FRQ:1,   /* The system will accept and process FREQs */
 	       NRQ:1,   /* No file requests accepted by this system */
@@ -148,6 +151,7 @@ struct emsi
 	char        passwd[EMSI_MAXPASSWD+1];
 	s_linkcodes linkcodes;		/* XXn linkcodes contained in eaddr  */
 	s_compcodes compcodes;
+	char        proto_order[EMSI_MAXADDONS+1];
 	char        m_pid[EMSI_MAXMPID+1];
 	char        m_name[EMSI_MAXMNAME+1];
 	char        m_ver[EMSI_MAXMVER+1];