bforce/examples/bforce.conf

##
## This is an example binkleyforce configuration file
##
## Configuration line format:
##   <Keyword> [(<expression>)] <Value>
##
## For all addresses masks ``2:5020/*'' is equal to the ``2:5020/*.0''
##
## Expression elements:
##   <Address or address mask>
##   Time <interval>[,<interval>,..]
##   Speed <logic_operator> <number>
##   ConnSpeed <logic_operator> <number>
##   Flag <nodelist_flag>
##   Exec <command_name>
##   Inbound, Outbound, Listed, Protected
##
## You can split long strings by adding '\' character to the end of previous
## line. Total length of string is unlimited. For example:
##
##  Options NoZmodem \
##          NoZedZap
##
## Config reader directives:
##
##   $INCLUDE    <filename>         Include this file
##
##   $IFEXP      <expression>       All data between ``$IFEXP'' and ``$ENDIF''
##      <config_keyword> <value>    directives will be used with the specified
##      ....                        expression, empty lines are unallowed
##   $ENDIF
##
## Examples:
##
##   $IFEXP ((2:*/*.* | !protected) & Time 23:00-01:00)
##     options NoFreqs
##     min_speed_in 14400
##     session_limit_in 600
##   $ENDIF
##

$INCLUDE /usr/local/fido/etc/bforce.subst
$INCLUDE /usr/local/fido/etc/bforce.passwd

address 2:450/256.0@fidonet
address 2:450/247.128@fidonet
address 20:26/100.0@easynet

#
# Hide addresses from remote, where <address> must be one of your AKAs
#
# hide_our_aka <address>
#

#
# Allowed options:
#   [No]Zmodem,  [No]ZedZap,   [No]DirZap, [No]Janus,   [No]Hydra
#   [No]Chat,    [No]FTS1,     [No]YooHoo, [No]EMSI,    [No]EMSI-II
#   [No]Freqs,   [No]MailOnly, [No]HoldXT, [No]HoldReq, [No]HoldHold
#   [No]HoldAll, [No]PickUp,   [No]RH1
#
# Now it is highly recommended to set at least "NoDirZap NoJanus"
#
options NoDirZap NoJanus NoChat

# Protocol order for outgoing EMSI calls
# Tolerant to Options (i.e. you can order all kind of protos
# as of TZA,KER,JAN and SLK are not supported at all
# Default: HYD,JAN,DZA,ZAP,ZMO,TZA,SLK,KER
proto_order HYD,ZMO,ZAP,DZA,JAN,TZA,KER,SLK

#
# Domain outbounds
#   Domain <domain_name> <outbound_dir> <zone>
#
#domain lasernet  /var/spool/ftn/lasernet/	161
#domain medianet  /var/spool/ftn/medianet/	776
#domain schoolnet /var/spool/ftn/schoolnet/	461

#
# Log/debug file names (if not defined, used builtins)
#						
#log_file_daemon /var/log/bforce/bf-daemon
#log_file /var/log/bforce/bf-log

# Debugging information completness level. Debugging is disabled by
# default. Allowed debug levels: config, override, event, nodelist, outbound, 
# info, hshake, ttyio, modem, prot, freq, statem, daemon, 24554, free, full

#debug_file /var/log/bforce/bf-debug
#debug_level info hshake prot

#
# Existing of this file forbid any outgoing modem calls. Existing of
# file with name <nodialflag>.ttyS1 forbid outgoing calls only via
# modem on device /dev/ttyS1, and so on.
#
nodial_flag /etc/nodial

#
# Incoming flags
# Netmail:
#incnet_flag /var/spool/fido/flags/mail
# Arcmail:
#incarc_flag /var/spool/fido/flags/echo
# FileEcho TIC
#inctic_flag /var/spool/fido/flags/tick
# Regular file recieve
#incfile_flag /var/spool/fido/flags/alert


#
# Inbound directories
#
inbound_directory (Protected) /var/spool/fido/bt/pin
inbound_directory /var/spool/fido/bt/in

split_inbound yes

#
# Path to your 4D outbound (use zone as extension)
#
outbound_directory /var/spool/fido/bt/out

#
# Path to your AmigaDos style 4D outbound.
# (You can use all outbound styles at the same time)
#
#amiga_outbound_directory /var/spool/fido/bt/out

#
# Directory with your nodelists (for nodelist without full path)
#
nodelist_directory /var/spool/fido/ndl

#
# Directory for status files
#
status_directory /var/spool/fido/bforce

#
# Sessions history
#
history_file /var/log/bforce/history

#
# Minimal connect speeds for incoming/outgoing sessions
#
#min_speed_in 1200
#min_speed_out 1200

#
# Time limit for incoming/outgoing session [seconds]
#
#session_limit_in 1800
#session_limit_out 1800

#
# Abort transfer if minimal CPS stays longer this time (in seconds)
# Default value is 60 seconds.
#
#min_cps_time 120

#
# Force usage of this value as minimal CPS (most priority)
#   min_cps_recv <Minimal_CPS>
#   min_cps_send <Minimal_CPS>
#
# For example:
#   min_cps_recv (2:5020/1398) 2100
#   min_cps_recv (2:5020/1682) 3000
#   min_cps_recv (2:5020/1811) 1400

#
# Minimal CPS values for Zmodem ,ZedZap, DirZap protocols (Receive/Send)
#
#             <Speed>  <CPS>
#
zmodem_mincps_recv 300    15
zmodem_mincps_recv 1200   90
zmodem_mincps_recv 2400   120
zmodem_mincps_recv 4800   240
zmodem_mincps_recv 7200   360
zmodem_mincps_recv 9600	  480
zmodem_mincps_recv 12000  600
zmodem_mincps_recv 14400  720
zmodem_mincps_recv 16800  840
zmodem_mincps_recv 19200  960
zmodem_mincps_recv 21600  1080
zmodem_mincps_recv 23600  1180
zmodem_mincps_recv 24000  1200
zmodem_mincps_recv 26400  1320
zmodem_mincps_recv 28800  1440
zmodem_mincps_recv 31200  1600
zmodem_mincps_recv 33600  1700

zmodem_mincps_send 300    15
zmodem_mincps_send 1200   90
zmodem_mincps_send 2400   120
zmodem_mincps_send 4800   240
zmodem_mincps_send 7200   360
zmodem_mincps_send 9600   480
zmodem_mincps_send 12000  600
zmodem_mincps_send 14400  720
zmodem_mincps_send 16800  840
zmodem_mincps_send 19200  960
zmodem_mincps_send 21600  1080
zmodem_mincps_send 23600  1180
zmodem_mincps_send 24000  1200
zmodem_mincps_send 26400  1320
zmodem_mincps_send 28800  1440
zmodem_mincps_send 31200  1600
zmodem_mincps_send 33600  1700

hydra_mincps_recv 300    15
hydra_mincps_recv 1200   90
hydra_mincps_recv 2400   120
hydra_mincps_recv 4800   240
hydra_mincps_recv 7200   360
hydra_mincps_recv 9600	  480
hydra_mincps_recv 12000  600
hydra_mincps_recv 14400  720
hydra_mincps_recv 16800  840
hydra_mincps_recv 19200  960
hydra_mincps_recv 21600  1080
hydra_mincps_recv 23600  1180
hydra_mincps_recv 24000  1200
hydra_mincps_recv 26400  1320
hydra_mincps_recv 28800  1440
hydra_mincps_recv 31200  1600
hydra_mincps_recv 33600  1700

hydra_mincps_send 300    15
hydra_mincps_send 1200   90
hydra_mincps_send 2400   120
hydra_mincps_send 4800   240
hydra_mincps_send 7200   360
hydra_mincps_send 9600   480
hydra_mincps_send 12000  600
hydra_mincps_send 14400  720
hydra_mincps_send 16800  840
hydra_mincps_send 19200  960
hydra_mincps_send 21600  1080
hydra_mincps_send 23600  1180
hydra_mincps_send 24000  1200
hydra_mincps_send 26400  1320
hydra_mincps_send 28800  1440
hydra_mincps_send 31200  1600
hydra_mincps_send 33600  1700

#
# Automatically set this permissions on the received files
#
mode_default 100660
mode_arcmail 100660
mode_netmail 100660
mode_request 100660

#
# In modem commands you can use:
# 	'|'	cartidge return
#	'^'	high DTR
#	'v'	low DTR
#	'~'	1 second delay
#	'`'	1/4 second delay

# Modem lock directory (/var/lock as in FHS-3.0 
# if you have it on tmpfs by systemd - read INSTALL.ru)
# uucp_lock_directory /var/lock

#
# Yor modem devices names (will use first not locked one)
#   ModemDev <device>[<:lock_speed>]
#
modem_port /dev/ttyS0:57600

#
# Send this string to modem before calling
#
modem_reset_command AT|

#
# Dial string
#
modem_dial_prefix ATDP

#
# Dial string
#
modem_dial_suffix |

#
# Hangup string
#
modem_hangup_command v~^~ATH0|

#
# Command for getting modem statistic (after outgoing sessions)
#
#
#modem_stat_command AT%S|
# if your modem do not send statistic, use this:
modem_stat_command AT|

#
# List of modem responses on modem dial command
#
# First field is substring of modem response string, first match used!
#
# Second field value      Default return code
#   connect                      --
#   busy                         11
#   nocarrier                    12
#   nodialtone                   13
#   noanswer                     14
#   error                        15
#
# You are free to use something like: ModemDialResp "LINE IN USE" Error 200
#
#                  <Modem said> <Mailer think> [Return code]
#
modem_dial_response "CONNECT"     connect
modem_dial_response "BUSY"        busy
modem_dial_response "NO CARRIER"  nocarrier
modem_dial_response "NO DIAL"     nodialTone
modem_dial_response "NO ANSWER"   noanswer
modem_dial_response "VOICE"       noanswer
modem_dial_response "ERROR"       error

#
# Your nodelists. Will try all nodelists with matching address mask.
# Supports nodelist masks by extension. For ex. nodelist.999 will
# match the latest by date of nodelist.???
# WARNING: You should define at least one nodelist!
#
nodelist nodelist.999  *:*/*.0
nodelist 450_256.pnt  2:450/256.*
nodelist easynet.ndl   20:26/*.0
nodelist  *:*/*.*

#
# Nodelist phone numbers translation
# phone_translate <what_translate> [to_what_translate]

phone_translate 375-17-
phone_translate 375-  8W


#
# Your system information (for EMSI only)
#
system_name XXX Station
location Minsk, Belarus
sysop_name Evgeniy Kozhuhovskiy
phone 375-17-2250238, voice: 375-29-5586164
max_speed 57600
flags XW,V34B,IDC,LMD
emsi_OH_time 22:00-07:30
emsi_FR_time 22:30-05:30
#emsi_send_tz no
#emsi_send_time no


#
# Our receiver buffer size [bytes]
#
recv_buffer_size 65536

#
# Wait for modem response this time at calling [seconds]
#
wait_carrier_out 120

# Command to run external SRIF processor
#
#freq_srif_command /usr/local/lib/u-srif/u-srif

#
# Files with list of aliases and dirs for FREQs
#
freq_alias_list /usr/local/fido/etc/freq.aliases
freq_dir_list /usr/local/fido/etc/freq.dirs

#
# Maximal number of files to send on FREQs
#
freq_limit_number 10

#
# Size limit for file requests [bytes]
#
freq_limit_size 6000000

#
# _SEND_ requested files not longer this time [seconds]
#
freq_limit_time 1200

#
# Ignore this masks in file requests
#
freq_ignore_masks \\* \\*.\\* \\*.zip \\*.rar \\*.tgz \\*.mp3

#
# Skip files with ZRPOS on zmodem protocol (else use ZSKIP)
#
#zmodem_skip_by_pos yes

#
# Binkleyforce will send empty netmail packet on Zmodem/ZedZap/DirZap
# protocols if there is nothing to send (default - No)
#
zmodem_send_dummy_pkt no

#
# Initial block size [bytes] for Zmodem/ZedZap/DirZap protocols
#
#zmodem_start_block_size 512

#
# Tx window size [bytes] for Zmodem/ZedZap/DirZap protocols
#
#zmodem_tx_window 32768

#
# Automaticaly skip files with such names at receiving
#
skip_files_recv *.pif *.swp

#
# Delay files with such names at receiving/sending
#
#delay_files_recv !%arcmail !%netmail # We will refuse all except mail
#delay_files_send !%netmail           # We will send only netmail
#				      #	packets
#
# Our netmail-only uplink
#delay_files_recv (2:450/102) !%netmail
#
# Binkleyforce will delay all receiving files if free space space
# in the inbound directory is lower this value [Kbytes]
#
#min_free_space 20000

#
# Tables for recoding to another charset. Tables format is compartible
# with HPT, FTrack and possible with something else.
#
# File names recoding
#recode_file_out /usr/local/fido/etc/koi82alt.tbl
#recode_file_in /usr/local/fido/etc/alt2koi8.tbl 
# Intro recoding (Buggy Sidoroff)
#recode_intro_in (2:450/236) /usr/local/fido/etc/alt2koi8.tbl

#
# External programs support. Possible execution options:
#
#   nowait   - don't wait for the process termination
#   logout   - write stdout/stderr to the log
#   setsid   - run command in a new session
#   useshell - run command by calling a shell (/bin/sh)
#
#   Bforce will make environment for external programs 
#   which include these variables:
#   $REM_ADDR_FTN - remote ftn address
#   $REM_ADDR_INET - remote inet address
#   $LOC_ADDR_FTN - local ftn address
#   $LOC_ADDR_INET - local inet address
#   $PASSWORD - session password
#   $MAILER - remote mailer
#   $LOCATION - remote location
#   $SYSOP - remote SysOp name
#   $SYSTEM_NAME - remote station name
#   $PHONE - remote phone 
#   $FLAGS - remote flags
#   $PROTECTED - password protected on both sides
#   $LISTED - present in nodelist
#   $INBOUND - current inbound path for this remote
#
#run_after_handshake [logout]/bin/echo "Hello, world!"
#run_after_session [nowait,setsid]/usr/local/lib/ftp/run-in
#
# To see a nodelist node information in the log file, write:
#
#run_after_handshake [useshell,logout]/usr/local/lib/ftn/nlookup $REM_ADDR_FTN
#


#
# Path to the directory with "long" fileboxes. Such fileboxes names
# has the format "<zone>.<net>.<node>.<point>" (e.g. "2.5020.2120.0").
# The files from such fileboxes are allways queued with a "hold" flavor
#
#filebox_directory /var/spool/fido/bt/fbox

#
# Personal fileboxes
#   filebox <path> <address> [flavor]
#
#filebox  /var/spool/ftn/fbox/adb    2:5020/2120.1  hold
#filebox  /var/spool/ftn/fbox/pvc    2:5020/2091    normal

#
# ?LO files content translation rules
#   flo_translate <find string> <replace string>
#
#flo_translate  C:\\fido\\spool\\outbound  /var/spool/ftn/out
#flo_translate  \\  /

#######################
# DAEMON configuration

#
# Try counters short description:
#
# <Keyword> <Tries number> <Action> [<Action argument>]
#
# Allowed 'Keywords':
#  'Maxtries'
#      Increase : every time when we call system
#      Reset    : successful session
#  'Maxtries_noansw'
#      Increase : modem return "noanswer"
#      Reset    : connect
#  'Maxtries_noconn'
#      Increase : cannot connect
#      Reset    : connect
#  'Maxtries_hshake'
#      Increase : handshake failure
#      Reset    : successful handshake
#  'Maxtries_sessions'
#      Increase : any failures after connect (including connect speed too low)
#      Reset    : successful session
#  'Maxtries_nodial'
#      Increase : modem return "nodialtone"
#      Reset    : connect
#
# Allowed 'Actions':
#  'Undialable' - set undialable flag to the system, so we will never try
#                 to call it more
#  'Hold'       - don't call system during next <Action argument> seconds
#  'HoldAll'    - don't make outgoing calls to ANY system during next
#                 <Action argument> seconds
#

maxtries           200  Undialable   # Be carefull.. =)
maxtries_noansw    5    Hold  7200   # Call two hours later
maxtries_noconn    40   Hold  10800  # Don't call 3 hours
maxtries_hshake    10   Hold  86400  # 1 day delay
maxtries_sessions  10   Hold  3600   # Don't annoy uplinks
maxtries_nodial    1    Hold  1200   # Call 20 min later 

#
# Minimum delay between reusings of the same modem [seconds]
#
daemon_circle_modem 40

#
# Outbound queue rescan interval [seconds]
#
daemon_circle_rescan 60

#
# Minimum delay between two outgoing calls to the same system,
# depending on the mail/files flavor [seconds]
#
daemon_circle_normal 80
daemon_circle_direct 40
daemon_circle_crash  20
daemon_circle_immed  10

#
# Maximum number of the simultaneously running TCP/IP clients. Zero value
# will forbid any outgoing calls via TCP/IP
#
daemon_maxclients_tcpip 3

#
# Maximum number of the simultaneously running modem clients. Zero value
# will forbid any outgoing calls via modems
#
daemon_maxclients_modem 1

#
# Daemon PID file name
#
daemon_pid_file /var/run/bforce.pid

# 
# Syslog facility (see man 3 openlog and /usr/include/sys/syslog.h for list of facilities)
# 64 == 8<3 == LOG_UUCP
# See SYSLOG for details
#
syslog_facility 64

#
# Holdall flag (if exists, no mail will sent)
#
nomail_flag /etc/nomail

#
# run_before_session executes a command specified
# and returns after the command has been completed.
#
run_before_session /usr/local/bin/call_inet.sh

# 
# convert names of recieved files to lower case
# (yes/no)
#
recieved_to_lower yes

# That's all!